Hi Greg, A few split string in i2c (and now hwmon) drivers lack a joining space, causing them to display incorrectly. This trivial patch fixes that up. Please apply, thanks. Signed-off-by: Jean Delvare <khali at linux-fr.org> drivers/hwmon/adm1026.c | 2 +- drivers/hwmon/max1619.c | 2 +- drivers/hwmon/pc87360.c | 2 +- drivers/i2c/busses/i2c-i801.c | 6 +++--- 4 files changed, 6 insertions(+), 6 deletions(-) --- linux-2.6.13-rc3.orig/drivers/hwmon/pc87360.c 2005-07-13 23:34:59.000000000 +0200 +++ linux-2.6.13-rc3/drivers/hwmon/pc87360.c 2005-07-13 23:35:05.000000000 +0200 @@ -1056,7 +1056,7 @@ if (init >= 2 && data->innr) { reg = pc87360_read_value(data, LD_IN, NO_BANK, PC87365_REG_IN_CONVRATE); - dev_info(&client->dev, "VLM conversion set to" + dev_info(&client->dev, "VLM conversion set to " "1s period, 160us delay\n"); pc87360_write_value(data, LD_IN, NO_BANK, PC87365_REG_IN_CONVRATE, --- linux-2.6.13-rc3.orig/drivers/i2c/busses/i2c-i801.c 2005-07-13 23:34:12.000000000 +0200 +++ linux-2.6.13-rc3/drivers/i2c/busses/i2c-i801.c 2005-07-13 23:35:05.000000000 +0200 @@ -137,7 +137,7 @@ pci_read_config_word(I801_dev, SMBBA, &i801_smba); i801_smba &= 0xfff0; if(i801_smba == 0) { - dev_err(&dev->dev, "SMB base address uninitialized" + dev_err(&dev->dev, "SMB base address uninitialized " "- upgrade BIOS or use force_addr=0xaddr\n"); return -ENODEV; } @@ -186,7 +186,7 @@ int result = 0; int timeout = 0; - dev_dbg(&I801_dev->dev, "Transaction (pre): CNT=%02x, CMD=%02x," + dev_dbg(&I801_dev->dev, "Transaction (pre): CNT=%02x, CMD=%02x, " "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT), inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), inb_p(SMBHSTDAT1)); @@ -240,7 +240,7 @@ outb_p(inb(SMBHSTSTS), SMBHSTSTS); if ((temp = (0x1f & inb_p(SMBHSTSTS))) != 0x00) { - dev_dbg(&I801_dev->dev, "Failed reset at end of transaction" + dev_dbg(&I801_dev->dev, "Failed reset at end of transaction " "(%02x)\n", temp); } dev_dbg(&I801_dev->dev, "Transaction (post): CNT=%02x, CMD=%02x, " --- linux-2.6.13-rc3.orig/drivers/hwmon/adm1026.c 2005-07-13 23:34:59.000000000 +0200 +++ linux-2.6.13-rc3/drivers/hwmon/adm1026.c 2005-07-13 23:35:05.000000000 +0200 @@ -398,7 +398,7 @@ value = data->config3; if (data->config3 & CFG3_GPIO16_ENABLE) { - dev_dbg(&client->dev, "GPIO16 enabled. THERM" + dev_dbg(&client->dev, "GPIO16 enabled. THERM " "pin disabled.\n"); } else { dev_dbg(&client->dev, "THERM pin enabled. " --- linux-2.6.13-rc3.orig/drivers/hwmon/max1619.c 2005-07-13 23:34:59.000000000 +0200 +++ linux-2.6.13-rc3/drivers/hwmon/max1619.c 2005-07-13 23:35:05.000000000 +0200 @@ -376,7 +376,7 @@ i2c_del_driver(&max1619_driver); } -MODULE_AUTHOR("Alexey Fisher <fishor at mail.ru> and" +MODULE_AUTHOR("Alexey Fisher <fishor at mail.ru> and " "Jean Delvare <khali at linux-fr.org>"); MODULE_DESCRIPTION("MAX1619 sensor driver"); MODULE_LICENSE("GPL"); -- Jean Delvare