Hi,
does anybody have a correct "sensors.conf" for the
Asus A7M266-D (Dual Athlon MP 1900+) board?
I'm almost sure that the formulas for the following
values are not correct:
-12V
-5V
M/B Temp
CPU Temp
temp3
Here's the output of sensors:
==============8<=================
as99127f-i2c-0-2d
Adapter: SMBus AMD768 adapter at e4e0
VCore 1: +1.76 V (min = +1.66 V, max = +1.82 V)
VCore 2: +1.71 V (min = +1.66 V, max = +1.82 V)
+3.3V: +3.34 V (min = +3.14 V, max = +3.46 V)
+5V: +5.00 V (min = +4.73 V, max = +5.24 V)
+12V: +11.98 V (min = +10.82 V, max = +13.19 V)
-12V: -3.18 V (min = -13.22 V, max = -10.74 V) ALARM
-5V: -0.77 V (min = -5.25 V, max = -4.74 V)
fan1: 4720 RPM (min = 4891 RPM, div = 2)
fan2: 4856 RPM (min = 4017 RPM, div = 2)
fan3: 0 RPM (min = 2743 RPM, div = 2)
M/B Temp: +27??C (high = -100??C, hyst = +64??C) ALARM
CPU Temp: +90.0??C (high = +190??C, hyst = +170??C) (beep)
temp3: +89.0??C (high = +190??C, hyst = +170??C)
vid: +1.750 V (VRM Version 9.0)
alarms:
beep_enable:
Sound alarm enabled
==============8<=================
The labels should also be CPU0 Temp, CPU1 Temp
and so on. Is there anyone, who can help?
Thanks,
Peter.
