Try the following link below where you need the kernel patch for ipmi_smb_intf driver http://sourceforge.net/projects/openipmi/ Follow the link above for the 2.4 or 2.6 kernel. Also you need the i801 driver to be loaded. I hope this helps as this worked for me on a SE7320VP2 platform. -JB -----Original Message----- From: Sch?fer Raumgestaltung [mailto:ulrich at schaefer-raumgestaltung.de] Sent: Tuesday, July 05, 2005 2:47 PM To: lm-sensors at lm-sensors.org Subject: Unsupported mBMC on Intel SE7320SP2 Chips on this Board: Super-I/O National (now Winbond) PC 87427 mBMC National PC 87431 No Info available as i read in Section 'newdrivers' I found some 'Documentation' on INTEL Support CD (see partial Cut below) if useful, please E-Mail for further Data....... hth Uli //**************************************************************************** // // File Header Information // _LF_NAME 'SE7320SP2/SE7525GP2 SDR File' _LF_VERSION '1.10' _LF_FMT_VER '1.50' _IPMI_VERSION '1.50' // // SDR Header Information // _SDR ( _START_ADDR 0000 _DATA_LEN 0000 _NVS_TYPE 'IMBDEVICE' _DEV_BUS FF _DEV_ADDRESS 20 // ================================================================ ######################## Cut here '########################################## // ================================================================ // CPU1 12V Sensor SDR entry (0Ah) // ================================================================ _SDR_TYPE 01 _REC_LEN 0038 // Sensor Record Header 000B // Record ID 51 // SDR Version 01 // Record Type 33 // Record Length // Record Key Bytes 20 // Sensor Owner ID 00 // Sensor Owner LUN 0A // Sensor Number // Record Body Bytes 07 // Entity ID 01 // Entity Instance 79 // Sensor Initialization 68 // Sensor Capabilities 02 // Sensor Type 01 // Event / Reading Base Type 8532 // Assertion Event Mask 8532 // Deassertion Event Mask 1B1B // Reading Mask & Settable / Readable Threshold Masks 00 // Sensor Units 1 04 // Sensor Units 2 00 // Sensor Units 3 00 // Linearization 3E // M 00 // M, Tolerance 60 // B 00 // B, Accuracy 00 // Accuracy, Accuracy Exp D0 // R exp, B exp 07 // Analog characteristic flags C1 // Nominal Reading D2 // Normal Maximum B3 // Normal Minimum FF // Sensor Maximum Reading 00 // Sensor Minimum Reading 00 // Upper non-recoverable D9 // Upper critical D3 // Upper non-critical 00 // Lower non-recoverable AD // Lower critical B2 // Lower non-critical 02 // Positive hysterisis value 02 // Negative hysterisis value 00 // Reserved 00 // Reserved 00 // OEM C8 // Type/Length Code 'CPU1 12V' // String Bytes ######################## Cut here '########################################## // ================================================================ // Proc1 VCCP Sensor SDR entry (15h) // ================================================================ _SDR_TYPE 02 _REC_LEN 002A // Sensor Record Header 0016 // Record ID 51 // SDR Version 02 // Record Type 25 // Record Length // Record Key Bytes 20 // Sensor Owner ID 00 // Sensor Owner LUN 15 // Sensor Number // Record Body Bytes 03 // Entity ID 01 // Entity Instance 79 // Sensor Initialization 68 // Sensor Capabilities 02 // Sensor Type 03 // Event / Reading Base Type 0100 // Assertion Event Mask 0100 // Deassertion Event Mask 0100 // Reading Mask & Settable / Readable Threshold Masks C0 // Sensor Units 1 00 // Sensor Units 2 00 // Sensor Units 3 0100 // Sensor Record Sharing 00 // Positive-going Threshold Hysteresis 00 // Negative-going Threshold Hysteresis 00 // Reserved 00 // Reserved 00 // Reserved 00 // OEM CA // Type/Length Code 'Proc1 VCCP' // String Bytes _______________________________________________ lm-sensors mailing list lm-sensors at lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
