Hello Rudolf, Thank you very much for your response. I did not get around to this tonight but hope to before the end of the week, if not certainly before the weekend is over. Thank you again for the reply. I appreciate your help very much. Sincerely, Mike --- Rudolf Marek <r.marek at sh.cvut.cz> wrote: > Michael Greenish wrote: > > Hello, > > > > I tried several times to submit this ticket but > did > > not get a confirmation email and could not find my > > ticket in any of the lists. Below, please find my > > issue. I have tried to include everything > requested > > in the FAQ section 5.1. Thank you in advance for > your > > help. > > > > Hi > > I will try to help. > > > motherboard: asus P5GD2 Premium > > chipsets: Intel? 915P, Intel? ICH6R > > distribution: SuSE 9.2 > > kernel: 2.6.8-24.14-smp > > processor: Intel P4 3.0 GHz > > lm-sensors: 2.9.1 (trying to install) > > I think you have there w83792d chip. Please can you > confirm? > http://www.uac.co.jp/news/daily/040622_2/img/p5gd2pro.jpg > > Look to a small chip just on the top of first > PCI-express slot from a left. > Manufacturer is Winbond and I think it will be > w83792d but I cant read it. > You dont need to do it if we get 2.9.1 working. > > > My overall goal is to get my cpu temperature since > I > > am getting over-temperature messages. > > > > First I did a sensors-detect. > > Good. > > > Client found at address 0x2f > > Probing for `National Semiconductor LM78'... > Failed! > > Probing for `National Semiconductor LM78-J'... > Failed! > > Probing for `National Semiconductor LM79'... > Failed! > > Probing for `National Semiconductor LM80'... > Failed! > > Probing for `Winbond W83781D'... Failed! > > Probing for `Winbond W83782D'... Failed! > > Probing for `Winbond W83791D'... Failed! > > Probing for `Winbond W83627HF'... Failed! > > Probing for `Asus AS99127F (rev.1)'... Failed! > > Probing for `Asus AS99127F (rev.2)'... Failed! > > Probing for `Asus ASB100 Bach'... Failed! > > Probing for `Analog Devices ADM9240'... Failed! > > Probing for `Dallas Semiconductor DS1780'... > Failed! > > Probing for `National Semiconductor LM81'... > Failed! > > Probing for `Analog Devices ADM1029'... Failed! > > Probing for `ITE IT8705F / IT8712F / SiS 950'... > > Failed! > > I think this will be w83792d. > > > Client found at address 0x48 > > Probing for `National Semiconductor LM75'... > Success! > > (confidence 6, driver `lm75') > > Probing for `Dallas Semiconductor DS1621'... > Failed! > > Probing for `Maxim MAX6650/MAX6651'... Failed! > > Probing for `National Semiconductor LM92'... > Failed! > > Probing for `National Semiconductor LM76'... > Failed! > > Probing for `Maxim MAX6633/MAX6634/MAX6635'... > Failed! > > Client found at address 0x49 > > Probing for `National Semiconductor LM75'... > Success! > > (confidence 6, driver `lm75') > > Probing for `Dallas Semiconductor DS1621'... > Failed! > > Probing for `National Semiconductor LM92'... > Failed! > > Probing for `National Semiconductor LM76'... > Failed! > > Probing for `Maxim MAX6633/MAX6634/MAX6635'... > Failed! > > And this subclients of the chip... > > > ****** START of make user ******* > > > > share:/home/greanie # cd i2c-2.9.1 > > ishare:/home/greanie/i2c-2.9.1 # make user; make > > user_install > > Hmm you dont need the i2c package when using 2.6.x > kernels > You need lm_sensors-2.9.1 package Bad news for you > is that the driver is not yet in 2.6.x kernel. > > So first to confirm that you have that chip please > do: > > 1) uninstall all lm-sensors suse packages > 2) download > http://secure.netroedge.com/~lm78/archive/lm_sensors-2.9.1.tar.gz > 3) unzip > 4) make user; make user_install (second command as > root) > 5) run sensors-detect again > > If you get w83792d detected you dont need to do > visual check. > > To get the driver working you have two possibilites > > 1) Install 2.4.x kernel and install i2c-2.9.1 and > lm-sensors-2.9.1 (make ; make install - this time) > 2) Patch your 2.6.x kernel source Driver is here: > http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20050621/8dfe2e28/patch_w83792d-2.6.12-0001.gz > > I dont know your Linux skills first method should be > more easy, second one is bit more difficult. Let us > know when you will run to problems. > I hope it helps. > > Regards > > Rudolf > ____________________________________________________ Sell on Yahoo! Auctions ? no fees. Bid on great items. http://auctions.yahoo.com/
