Evgeniy, I finally have a working driver for w1 family 23. Along the way, I made a few changes to the w1 slave stuff. I also learned how to use quilt, so this wasn't nearly as painful as the last patch set. =) The patches depend on each other and should be applied in the following order. w1-select-slave.diff I added w1_reset_select_slave() This function resets the w1 bus and either sends a skip rom (0xCC) or the full select ROM + id. If there is only 1 slave present, it does skip rom. w1-select-slave-use.diff I changed w1-therm to use w1_reset_select_slave. w1-container-of.diff I added three inline function to hide the use of container_of(). - dev_to_w1_slave() - kobj_to_w1_slave() - dev_to_w1_master() w1-slave-sysfs.diff Every slave now has at least two sysfs files: - id : an 8 byte binary file that holds the 64 bit id example: [23 6c dc 1c 00 00 00 43] - name : the name, example: [23-0000001cdc6c] Family ops is now two callback functions: add_slave() and remove_slave(). The family driver is responsible for creating any other sysfs entries. This patch updates w1-smem (which is pretty much empty) and w1-therm. w1-ds2433.diff The driver for family 23. Would you take a moment to review and try it out to make sure I didn't break anything? Thanks, Ben
