Hi Ryan, > > Setting the correct "set fanN_min" lines in the lm78-* section of > > the /etc/sensors.conf and running "sensors -s" afterwards should do. > > Yes, this fixed it. Would it make sense to add fanX_min prototypes to > the lm78 section, since at least my chip seems to have incorrect > minimums? Good idea, I just added them. > I wonder if anyone else with lm78 has noticed this. I don't have the problem on mine, the LM78 chip comes up with a low limit of 0 RPM for unconnected fans and 1997 RPM for connected ones, which is fine. Maybe the BIOS of my motherboard (Asus TX97-E) sets the limits that way. -- Jean Delvare
