Hi there,
Story so far, test user with a pair of ds1780 chips, patch posted
early today fixed main issue, (user patched/install 2.9.1) another
issue:
>sensors -u gives:
>ERROR: Can't get feature `vid' data!
>alarms: 4096.00 (alarms)
>ERROR: Can't get feature `analog_out' data!
is already fixed in CVS lm_sensors2, referred user to that download,
o o o
third issue is with sensord, and I'm lost -- where to start?:
quoting from test user:
I edited chips.c in the lmsensors lib, and rebuilt.
Cleaned out the distro (Mandrake 10.1) libsensors and sensors stuff.
Installed the rebuilt 2.9.1
sensors ds1780-* produces
ds1780-i2c-0-2d
Adapter: SMBus I801 adapter at ccd0
2.5v: +0.99 V (min = +0.00 V, max = +2.00 V)
V1: +1.48 V (min = +1.41 V, max = +1.60 V)
3.3v: +3.30 V (min = +3.08 V, max = +3.52 V)
5v: +3.33 V (min = +3.10 V, max = +3.52 V)
12v: +11.94 V (min = +10.25 V, max = +13.75 V)
V2: +1.79 V (min = +1.69 V, max = +1.91 V)
F1: 0 RPM (min = 0 RPM, div = 8)
F2: 0 RPM (min = 0 RPM, div = 8)
T1: +38.0?C (high = +127?C, hyst = +13?C)
alarms: Chassis intrusion detection ALARM
ds1780-i2c-0-2c
Adapter: SMBus I801 adapter at ccd0
2.5v: +2.51 V (min = +2.33 V, max = +2.67 V)
V1: +1.67 V (min = +1.57 V, max = +1.80 V)
3.3v: +1.50 V (min = +1.39 V, max = +1.60 V)
5v: +5.00 V (min = +4.66 V, max = +5.34 V)
12v: +11.88 V (min = +10.25 V, max = +13.75 V)
V2: +1.98 V (min = +0.00 V, max = +3.59 V)
F1: 1940 RPM (min = 703 RPM, div = 8)
F2: 1896 RPM (min = 703 RPM, div = 8)
T1: +43.0?C (high = +127?C, hyst = +10?C)
alarms: Chassis intrusion detection ALARM
Much better.
sensord stll fails with:
May 27 20:01:54 harpo sensord: Chip: ds1780-i2c-0-2d
May 27 20:01:54 harpo sensord: Adapter: SMBus I801 adapter at ccd0
May 27 20:01:54 harpo sensord: Algorithm: Unavailable from sysfs
May 27 20:01:54 harpo sensord: 2.5v: +1.00 V (min = +0.00 V, max = +2.00 V)
May 27 20:01:54 harpo sensord: V1: +1.48 V (min = +1.41 V, max = +1.60 V)
May 27 20:01:54 harpo sensord: 3.3v: +3.30 V (min = +3.08 V, max = +3.52 V)
May 27 20:01:54 harpo sensord: 5v: +3.33 V (min = +3.10 V, max = +3.52 V)
May 27 20:01:54 harpo sensord: 12v: +11.94 V (min = +10.25 V, max = +13.75 V)
May 27 20:01:54 harpo sensord: V2: +1.79 V (min = +1.69 V, max = +1.91 V)
May 27 20:01:54 harpo sensord: F1: 0 RPM (min = 0 RPM, div = 8)
May 27 20:01:54 harpo sensord: F2: 0 RPM (min = 0 RPM, div = 8)
May 27 20:01:54 harpo sensord: T1: 38.0 C (limit = 127 C, hysteresis = 13 C)
May 27 20:01:54 harpo sensord: Error getting sensor data: ds1780/#61: Can't access procfs/sysfs file
May 27 20:01:54 harpo sensord: sensord failed
unquote
I'm stuck on this one at the moment. Any clues?
Thanks,
--Grant.
