Hi Gang, I put up a patch for adm9240 port for 2.6.11.10 on my website: http://scatter.mine.nu/hwmon/adm9240/ and scored me a live tester :) quote: >When I run 'sensors' I get > >ds1780-i2c-0-2d >Adapter: SMBus I801 adapter at ccd0 >ERROR: Can't get IN0 data! >ERROR: Can't get IN1 data! >ERROR: Can't get IN2 data! >ERROR: Can't get IN3 data! >ERROR: Can't get IN4 data! >ERROR: Can't get IN5 data! >F1: 0 RPM (min = 0 RPM, div = 8) >F2: 0 RPM (min = 0 RPM, div = 8) >T1: +37.0?C (high = +127?C, hyst = +13?C) >vid: +1.95 V >alarms: Chassis intrusion detection ALARM Seems to me I need add alternate in0..in5 naming to libsensors? At the moment libsensors uses the chip defined pin labels and is documented as "this may change", am I on right track? Might there be something else I should look for? Also, the user wants to use sensord, anything else I should check? Thanks, --Grant.
