Hi there,
Jean Delvare suggested:
>BTW, you'll notice that the w83781d driver
>also has support for that chip - I'd like it ripped off, if you want to
>work on this. Same for the W83627THF support in w83781d
Step one of several, removed w83697hf. Compile tested.
--Grant.
Signed-off-by: Grant Coady <gcoady at gmail.com>
---
w83781d.c | 63 ++++++++++++++++++++++++--------------------------------------
1 files changed, 25 insertions(+), 38 deletions(-)
--- linux-2.6.12-rc5-mm1/drivers/i2c/chips/w83781d.c 2005-05-26 09:40:14.000000000 +1000
+++ linux-2.6.12-rc5-mm1a/drivers/i2c/chips/w83781d.c 2005-05-27 12:50:20.000000000 +1000
@@ -31,10 +31,13 @@
w83627thf 9 3 2 3 0x90 0x5ca3 no yes(LPC)
w83782d 9 3 2-4 3 0x30 0x5ca3 yes yes
w83783s 5-6 3 2 1-2 0x40 0x5ca3 yes no
- w83697hf 8 2 2 2 0x60 0x5ca3 no yes(LPC)
*/
+/* FIXME remove this block in last patch of set
+ * removed w83697hf
+ * --Grant */
+
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
@@ -52,7 +55,7 @@
static unsigned int normal_isa[] = { 0x0290, I2C_CLIENT_ISA_END };
/* Insmod parameters */
-SENSORS_INSMOD_6(w83781d, w83782d, w83783s, w83627hf, as99127f, w83697hf);
+SENSORS_INSMOD_5(w83781d, w83782d, w83783s, w83627hf, as99127f);
I2C_CLIENT_MODULE_PARM(force_subclients, "List of subclient addresses: "
"{bus, clientaddr, subclientaddr1, subclientaddr2}");
@@ -998,7 +1001,7 @@
err = -EINVAL;
goto ERROR0;
}
- if (!is_isa && kind == w83697hf) {
+ if (!is_isa) {
dev_err(&adapter->dev,
"Cannot force ISA-only chip for I2C address 0x%02x.\n",
address);
@@ -1141,8 +1144,6 @@
kind = w83627hf;
else if (val1 == 0x31 && !is_isa && address >= 0x28)
kind = as99127f;
- else if (val1 == 0x60 && vendid == winbond && is_isa)
- kind = w83697hf;
else {
if (kind == 0)
dev_warn(&new_client->dev, "Ignoring 'force' "
@@ -1167,8 +1168,6 @@
client_name = "w83627hf";
} else if (kind == as99127f) {
client_name = "as99127f";
- } else if (kind == w83697hf) {
- client_name = "w83697hf";
}
/* Fill in the remaining client fields and put into the global list */
@@ -1206,7 +1205,7 @@
/* Register sysfs hooks */
device_create_file_in(new_client, 0);
- if (kind != w83783s && kind != w83697hf)
+ if (kind != w83783s)
device_create_file_in(new_client, 1);
device_create_file_in(new_client, 2);
device_create_file_in(new_client, 3);
@@ -1220,24 +1219,20 @@
device_create_file_fan(new_client, 1);
device_create_file_fan(new_client, 2);
- if (kind != w83697hf)
- device_create_file_fan(new_client, 3);
+ device_create_file_fan(new_client, 3);
device_create_file_temp(new_client, 1);
device_create_file_temp(new_client, 2);
- if (kind != w83783s && kind != w83697hf)
+ if (kind != w83783s)
device_create_file_temp(new_client, 3);
- if (kind != w83697hf)
- device_create_file_vid(new_client);
+ device_create_file_vid(new_client);
- if (kind != w83697hf)
- device_create_file_vrm(new_client);
+ device_create_file_vrm(new_client);
device_create_file_fan_div(new_client, 1);
device_create_file_fan_div(new_client, 2);
- if (kind != w83697hf)
- device_create_file_fan_div(new_client, 3);
+ device_create_file_fan_div(new_client, 3);
device_create_file_alarms(new_client);
@@ -1256,7 +1251,7 @@
if (kind != as99127f && kind != w83781d) {
device_create_file_sensor(new_client, 1);
device_create_file_sensor(new_client, 2);
- if (kind != w83783s && kind != w83697hf)
+ if (kind != w83783s)
device_create_file_sensor(new_client, 3);
}
@@ -1479,7 +1474,7 @@
else
data->sens[i - 1] = 2;
}
- if ((type == w83783s || type == w83697hf) && (i == 2))
+ if (type == w83783s && (i == 2))
break;
}
}
@@ -1495,7 +1490,7 @@
}
/* Enable temp3 */
- if (type != w83783s && type != w83697hf) {
+ if (type != w83783s) {
tmp = w83781d_read_value(client,
W83781D_REG_TEMP3_CONFIG);
if (tmp & 0x01) {
@@ -1536,7 +1531,7 @@
dev_dbg(dev, "Starting device update\n");
for (i = 0; i <= 8; i++) {
- if ((data->type == w83783s || data->type == w83697hf)
+ if ((data->type == w83783s)
&& (i == 1))
continue; /* 783S has no in1 */
data->in[i] =
@@ -1545,8 +1540,8 @@
w83781d_read_value(client, W83781D_REG_IN_MIN(i));
data->in_max[i] =
w83781d_read_value(client, W83781D_REG_IN_MAX(i));
- if ((data->type != w83782d) && (data->type != w83697hf)
- && (data->type != w83627hf) && (i == 6))
+ if ((data->type != w83782d) &&
+ (data->type != w83627hf) && (i == 6))
break;
}
for (i = 1; i <= 3; i++) {
@@ -1581,7 +1576,7 @@
w83781d_read_value(client, W83781D_REG_TEMP_OVER(2));
data->temp_max_hyst_add[0] =
w83781d_read_value(client, W83781D_REG_TEMP_HYST(2));
- if (data->type != w83783s && data->type != w83697hf) {
+ if (data->type != w83783s) {
data->temp_add[1] =
w83781d_read_value(client, W83781D_REG_TEMP(3));
data->temp_max_add[1] =
@@ -1592,26 +1587,18 @@
W83781D_REG_TEMP_HYST(3));
}
i = w83781d_read_value(client, W83781D_REG_VID_FANDIV);
- if (data->type != w83697hf) {
- data->vid = i & 0x0f;
- data->vid |=
- (w83781d_read_value(client, W83781D_REG_CHIPID) &
- 0x01)
- << 4;
- }
+ data->vid = i & 0x0f;
+ data->vid |= (w83781d_read_value(client,
+ W83781D_REG_CHIPID) & 0x01) << 4;
data->fan_div[0] = (i >> 4) & 0x03;
data->fan_div[1] = (i >> 6) & 0x03;
- if (data->type != w83697hf) {
- data->fan_div[2] = (w83781d_read_value(client,
- W83781D_REG_PIN)
- >> 6) & 0x03;
- }
+ data->fan_div[2] = (w83781d_read_value(client,
+ W83781D_REG_PIN) >> 6) & 0x03;
if ((data->type != w83781d) && (data->type != as99127f)) {
i = w83781d_read_value(client, W83781D_REG_VBAT);
data->fan_div[0] |= (i >> 3) & 0x04;
data->fan_div[1] |= (i >> 4) & 0x04;
- if (data->type != w83697hf)
- data->fan_div[2] |= (i >> 5) & 0x04;
+ data->fan_div[2] |= (i >> 5) & 0x04;
}
data->alarms =
w83781d_read_value(client,
