On Tue, May 17, 2005 at 06:39:07AM -0400, Yani Ioannou wrote: > Hi, > > The following patches implement dynamic sysfs callbacks for > device_attribute, and provide a possible standard sensor attribute > macro for the majority of the i2c sensor chip/hwmon drivers. Finally a > patch against adm1026 shows how the patch can be used to reduce the > footprint and clean up an existing driver. <snip> Ok, I think I got all of these patches applied properly (hint, don't label your intro message as 1/15, it should be 0/14, with 14 different patches, that threw me off for a bit.) I've also included your i2c driver patch for the adm1026 driver only. All of these patches are now in my tree and can be found on kernel.org in the place where my patchscripts notified you. If you could verify them I would appreciate it (I also added a few patches for stuff that was in my tree only, like new i2c drivers and some usb and pci sysfs stuff to make them build properly.) All of this should show up in the next -mm release too. Thanks a lot for sticking with this process, I really appreciate it. Now you can get back to actually fixing up the i2c drivers you wanted to, which was what you wanted to do in the first place :) thanks again, greg k-h _______________________________________________ lm-sensors mailing list lm-sensors at lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
