> Please include full output of sensors-detect
Here it goes:
[..]
Now follows a summary of the probes I have just done.
Just press ENTER to continue:
Driver `to-be-written' (should be inserted but causes problems):
Detects correctly:
* Bus `SMBus stub driver'
Busdriver `UNKNOWN', I2C address 0x09
Chip `Smart Battery Charger' (confidence: 5)
* Bus `SMBus stub driver'
Busdriver `UNKNOWN', I2C address 0x0a
Chip `Smart Battery Manager/Selector' (confidence: 5)
* Bus `SMBus stub driver'
Busdriver `UNKNOWN', I2C address 0x18
Chip `Philips Semiconductors PCA9556' (confidence: 1)
* Bus `SMBus stub driver'
Busdriver `UNKNOWN', I2C address 0x19
Chip `Philips Semiconductors PCA9556' (confidence: 1)
* Bus `SMBus stub driver'
Busdriver `UNKNOWN', I2C address 0x1a
Chip `Philips Semiconductors PCA9556' (confidence: 1)
* Bus `SMBus stub driver'
Busdriver `UNKNOWN', I2C address 0x1c
Chip `Philips Semiconductors PCA9556' (confidence: 1)
* Bus `SMBus stub driver'
Busdriver `UNKNOWN', I2C address 0x1d
Chip `Philips Semiconductors PCA9556' (confidence: 1)
* Bus `SMBus stub driver'
Busdriver `UNKNOWN', I2C address 0x1e
Chip `Philips Semiconductors PCA9556' (confidence: 1)
Misdetects:
* Bus `SMBus stub driver'
Busdriver `UNKNOWN', I2C address 0x1b
Chip `Philips Semiconductors PCA9556' (confidence: 1)
* Bus `SMBus stub driver'
Busdriver `UNKNOWN', I2C address 0x1f
Chip `Philips Semiconductors PCA9556' (confidence: 1)
Driver `smartbatt' (should be inserted):
Detects correctly:
* Bus `SMBus stub driver'
Busdriver `UNKNOWN', I2C address 0x0b
Chip `Smart Battery' (confidence: 5)
Driver `max6650' (should be inserted):
Detects correctly:
* Bus `SMBus stub driver'
Busdriver `UNKNOWN', I2C address 0x1b
Chip `Maxim MAX6650/MAX6651' (confidence: 4)
* Bus `SMBus stub driver'
Busdriver `UNKNOWN', I2C address 0x1f
Chip `Maxim MAX6650/MAX6651' (confidence: 4)
* Bus `SMBus stub driver'
Busdriver `UNKNOWN', I2C address 0x48
Chip `Maxim MAX6650/MAX6651' (confidence: 4)
* Bus `SMBus stub driver'
Busdriver `UNKNOWN', I2C address 0x4b
Chip `Maxim MAX6650/MAX6651' (confidence: 4)
Driver `saa1064' (should be inserted):
Detects correctly:
* Bus `SMBus stub driver'
Busdriver `UNKNOWN', I2C address 0x38
Chip `Philips Semiconductors SAA1064' (confidence: 4)
* Bus `SMBus stub driver'
Busdriver `UNKNOWN', I2C address 0x39
Chip `Philips Semiconductors SAA1064' (confidence: 4)
* Bus `SMBus stub driver'
Busdriver `UNKNOWN', I2C address 0x3a
Chip `Philips Semiconductors SAA1064' (confidence: 4)
* Bus `SMBus stub driver'
Busdriver `UNKNOWN', I2C address 0x3b
Chip `Philips Semiconductors SAA1064' (confidence: 4)
Driver `lm92' (should be inserted but causes problems):
Detects correctly:
* Bus `SMBus stub driver'
Busdriver `UNKNOWN', I2C address 0x40
Chip `Maxim MAX6633/MAX6634/MAX6635' (confidence: 2)
* Bus `SMBus stub driver'
Busdriver `UNKNOWN', I2C address 0x41
Chip `Maxim MAX6633/MAX6634/MAX6635' (confidence: 2)
* Bus `SMBus stub driver'
Busdriver `UNKNOWN', I2C address 0x42
Chip `Maxim MAX6633/MAX6634/MAX6635' (confidence: 2)
* Bus `SMBus stub driver'
Busdriver `UNKNOWN', I2C address 0x43
Chip `Maxim MAX6633/MAX6634/MAX6635' (confidence: 2)
* Bus `SMBus stub driver'
Busdriver `UNKNOWN', I2C address 0x44
Chip `Maxim MAX6633/MAX6634/MAX6635' (confidence: 2)
* Bus `SMBus stub driver'
Busdriver `UNKNOWN', I2C address 0x45
Chip `Maxim MAX6633/MAX6634/MAX6635' (confidence: 2)
* Bus `SMBus stub driver'
Busdriver `UNKNOWN', I2C address 0x46
Chip `Maxim MAX6633/MAX6634/MAX6635' (confidence: 2)
* Bus `SMBus stub driver'
Busdriver `UNKNOWN', I2C address 0x47
Chip `Maxim MAX6633/MAX6634/MAX6635' (confidence: 2)
Misdetects:
* Bus `SMBus stub driver'
Busdriver `UNKNOWN', I2C address 0x48
Chip `National Semiconductor LM76' (confidence: 2)
* Bus `SMBus stub driver'
Busdriver `UNKNOWN', I2C address 0x48
Chip `Maxim MAX6633/MAX6634/MAX6635' (confidence: 2)
* Bus `SMBus stub driver'
Busdriver `UNKNOWN', I2C address 0x49
Chip `National Semiconductor LM76' (confidence: 2)
* Bus `SMBus stub driver'
Busdriver `UNKNOWN', I2C address 0x49
Chip `Maxim MAX6633/MAX6634/MAX6635' (confidence: 2)
* Bus `SMBus stub driver'
Busdriver `UNKNOWN', I2C address 0x4a
Chip `National Semiconductor LM76' (confidence: 2)
* Bus `SMBus stub driver'
Busdriver `UNKNOWN', I2C address 0x4a
Chip `Maxim MAX6633/MAX6634/MAX6635' (confidence: 2)
* Bus `SMBus stub driver'
Busdriver `UNKNOWN', I2C address 0x4b
Chip `National Semiconductor LM76' (confidence: 2)
* Bus `SMBus stub driver'
Busdriver `UNKNOWN', I2C address 0x4b
Chip `Maxim MAX6633/MAX6634/MAX6635' (confidence: 2)
* Bus `SMBus stub driver'
Busdriver `UNKNOWN', I2C address 0x4c
Chip `Maxim MAX6633/MAX6634/MAX6635' (confidence: 2)
* Bus `SMBus stub driver'
Busdriver `UNKNOWN', I2C address 0x4d
Chip `Maxim MAX6633/MAX6634/MAX6635' (confidence: 2)
* Bus `SMBus stub driver'
Busdriver `UNKNOWN', I2C address 0x4e
Chip `Maxim MAX6633/MAX6634/MAX6635' (confidence: 2)
* Bus `SMBus stub driver'
Busdriver `UNKNOWN', I2C address 0x4f
Chip `Maxim MAX6633/MAX6634/MAX6635' (confidence: 2)
Driver `ds1621' (should be inserted but causes problems):
Detects correctly:
* Bus `SMBus stub driver'
Busdriver `UNKNOWN', I2C address 0x49
Chip `Dallas Semiconductor DS1621' (confidence: 3)
* Bus `SMBus stub driver'
Busdriver `UNKNOWN', I2C address 0x4a
Chip `Dallas Semiconductor DS1621' (confidence: 3)
* Bus `SMBus stub driver'
Busdriver `UNKNOWN', I2C address 0x4c
Chip `Dallas Semiconductor DS1621' (confidence: 3)
* Bus `SMBus stub driver'
Busdriver `UNKNOWN', I2C address 0x4d
Chip `Dallas Semiconductor DS1621' (confidence: 3)
* Bus `SMBus stub driver'
Busdriver `UNKNOWN', I2C address 0x4e
Chip `Dallas Semiconductor DS1621' (confidence: 3)
* Bus `SMBus stub driver'
Busdriver `UNKNOWN', I2C address 0x4f
Chip `Dallas Semiconductor DS1621' (confidence: 3)
Misdetects:
* Bus `SMBus stub driver'
Busdriver `UNKNOWN', I2C address 0x48
Chip `Dallas Semiconductor DS1621' (confidence: 3)
* Bus `SMBus stub driver'
Busdriver `UNKNOWN', I2C address 0x4b
Chip `Dallas Semiconductor DS1621' (confidence: 3)
Driver `eeprom' (should be inserted):
Detects correctly:
* Bus `SMBus stub driver'
Busdriver `UNKNOWN', I2C address 0x50
Chip `SPD EEPROM' (confidence: 8)
* Bus `SMBus stub driver'
Busdriver `UNKNOWN', I2C address 0x51
Chip `SPD EEPROM' (confidence: 8)
* Bus `SMBus stub driver'
Busdriver `UNKNOWN', I2C address 0x52
Chip `SPD EEPROM' (confidence: 8)
* Bus `SMBus stub driver'
Busdriver `UNKNOWN', I2C address 0x53
Chip `SPD EEPROM' (confidence: 8)
* Bus `SMBus stub driver'
Busdriver `UNKNOWN', I2C address 0x54
Chip `SPD EEPROM' (confidence: 8)
* Bus `SMBus stub driver'
Busdriver `UNKNOWN', I2C address 0x55
Chip `SPD EEPROM' (confidence: 8)
* Bus `SMBus stub driver'
Busdriver `UNKNOWN', I2C address 0x56
Chip `SPD EEPROM' (confidence: 8)
* Bus `SMBus stub driver'
Busdriver `UNKNOWN', I2C address 0x57
Chip `SPD EEPROM' (confidence: 8)
* Bus `SMBus Via Pro adapter at 0400'
Busdriver `i2c-viapro', I2C address 0x52
Chip `SPD EEPROM' (confidence: 8)
Driver `smbus-arp' (should be inserted):
Detects correctly:
* Bus `SMBus stub driver'
Busdriver `UNKNOWN', I2C address 0x61
Chip `SMBus 2.0 ARP-Capable Device' (confidence: 1)
Driver `pca9540' (should be inserted):
Detects correctly:
* Bus `SMBus stub driver'
Busdriver `UNKNOWN', I2C address 0x70
Chip `Philips Semiconductors PCA9540' (confidence: 1)
Driver `w83627hf' (should be inserted):
Detects correctly:
* ISA bus address 0x0290 (Busdriver `i2c-isa')
Chip `Winbond W83627THF Super IO Sensors' (confidence: 9)
I will now generate the commands needed to load the I2C modules.
Sometimes, a chip is available both through the ISA bus and an I2C bus.
ISA bus access is faster, but you need to load an additional driver module
for it. If you have the choice, do you want to use the ISA bus or the
I2C/SMBus (ISA/smbus)? i2c
To make the sensors modules behave correctly, add these lines to
/etc/modules:
#----cut here----
# I2C adapter drivers
# modprobe unknown adapter SMBus stub driver
i2c-viapro
i2c-isa
# I2C chip drivers
# no driver for Smart Battery Charger yet
# Warning: the required module smartbatt is not currently installed on
your system.
# For status of 2.6 kernel ports see
http://secure.netroedge.com/~lm78/supported.html
# If driver is built-in to the kernel, or unavailable, comment out the
following line.
smartbatt
# Warning: the required module max6650 is not currently installed on
your system.
# For status of 2.6 kernel ports see
http://secure.netroedge.com/~lm78/supported.html
# If driver is built-in to the kernel, or unavailable, comment out the
following line.
max6650
# Warning: the required module saa1064 is not currently installed on
your system.
# For status of 2.6 kernel ports see
http://secure.netroedge.com/~lm78/supported.html
# If driver is built-in to the kernel, or unavailable, comment out the
following line.
saa1064
# Warning: the required module lm92 is not currently installed on your
system.
# For status of 2.6 kernel ports see
http://secure.netroedge.com/~lm78/supported.html
# If driver is built-in to the kernel, or unavailable, comment out the
following line.
lm92
ds1621
# Warning: the required module eeprom is not currently installed on your
system.
# For status of 2.6 kernel ports see
http://secure.netroedge.com/~lm78/supported.html
# If driver is built-in to the kernel, or unavailable, comment out the
following line.
eeprom
# Warning: the required module smbus-arp is not currently installed on
your system.
# For status of 2.6 kernel ports see
http://secure.netroedge.com/~lm78/supported.html
# If driver is built-in to the kernel, or unavailable, comment out the
following line.
smbus-arp
# Warning: the required module pca9540 is not currently installed on
your system.
# For status of 2.6 kernel ports see
http://secure.netroedge.com/~lm78/supported.html
# If driver is built-in to the kernel, or unavailable, comment out the
following line.
pca9540
w83627hf
#----cut here----
Do you want to add these lines to /etc/modules automatically? (yes/NO)y
> and full output of sensors command.
# sensors
w83627thf-isa-0290
Adapter: ISA adapter
VCore: +1.42 V (min = +0.94 V, max = +0.96 V)
+12V: +11.92 V (min = +10.82 V, max = +13.19 V)
+3.3V: +0.64 V (min = +3.14 V, max = +3.47 V)
+5V: +5.01 V (min = +4.75 V, max = +5.25 V)
-12V: -14.91 V (min = -10.80 V, max = -13.18 V)
V5SB: +5.05 V (min = +4.76 V, max = +5.24 V)
VBat: +3.49 V (min = +2.40 V, max = +3.60 V)
fan1: 0 RPM (min = 56250 RPM, div = 2)
CPU Fan: 0 RPM (min = 37500 RPM, div = 2)
fan3: 0 RPM (min = 19285 RPM, div = 2)
M/B Temp: +39 C (high = +25 C, hyst = +1 C) sensor = thermistor
CPU Temp: +38.0 C (high = +80 C, hyst = +75 C) sensor = diode
temp3: -48.0 C (high = +80 C, hyst = +75 C) sensor = thermistor
vid: +0.275 V (VRM Version 9.0)
alarms:
beep_enable:
Sound alarm disabled
--
Mit besten Gr??en / best regards
Jonas Stein <js at jonasstein.de>
