On Sat, 30 Apr 2005 07:10:45 +1000, Grant Coady <grant_lkml at dodo.com.au> wrote:
>Greetings,
>
>This trivial patch changes adm1026 sysfs name "vid" to "cpu0_vid" to
>match the other drivers. Compile tested.
Part of sysfs naming cleanup and documentation project.
Oops, scrub that, need to change analog_out to aout_output to match
other drivers too.
While we're here, should 'vrm' accessor be removed as that value is
obtained internally by driver?
--Grant.
Signed-off-by: Grant Coady <gcoady at gmail.com>
---
adm1026.c | 8 ++++----
1 files changed, 4 insertions(+), 4 deletions(-)
--- linux-2.6.12-rc3/drivers/i2c/chips/adm1026.c 2005-04-30 06:45:30.000000000 +1000
+++ linux-2.6.12-rc3b/drivers/i2c/chips/adm1026.c 2005-04-30 07:22:59.000000000 +1000
@@ -1259,7 +1259,7 @@
return count;
}
-static DEVICE_ATTR(analog_out, S_IRUGO | S_IWUSR, show_analog_out_reg,
+static DEVICE_ATTR(aout_output, S_IRUGO | S_IWUSR, show_analog_out_reg,
set_analog_out_reg);
static ssize_t show_vid_reg(struct device *dev, char *buf)
@@ -1268,7 +1268,7 @@
return sprintf(buf,"%d\n", vid_from_reg(data->vid & 0x3f, data->vrm));
}
-static DEVICE_ATTR(vid, S_IRUGO, show_vid_reg, NULL);
+static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL);
static ssize_t show_vrm_reg(struct device *dev, char *buf)
{
@@ -1708,7 +1708,7 @@
device_create_file(&new_client->dev, &dev_attr_temp1_crit_enable);
device_create_file(&new_client->dev, &dev_attr_temp2_crit_enable);
device_create_file(&new_client->dev, &dev_attr_temp3_crit_enable);
- device_create_file(&new_client->dev, &dev_attr_vid);
+ device_create_file(&new_client->dev, &dev_attr_cpu0_vid);
device_create_file(&new_client->dev, &dev_attr_vrm);
device_create_file(&new_client->dev, &dev_attr_alarms);
device_create_file(&new_client->dev, &dev_attr_alarm_mask);
@@ -1726,7 +1726,7 @@
device_create_file(&new_client->dev, &dev_attr_temp1_auto_point2_pwm);
device_create_file(&new_client->dev, &dev_attr_temp2_auto_point2_pwm);
device_create_file(&new_client->dev, &dev_attr_temp3_auto_point2_pwm);
- device_create_file(&new_client->dev, &dev_attr_analog_out);
+ device_create_file(&new_client->dev, &dev_attr_aout_output);
return 0;
/* Error out and cleanup code */
