Hi Karel, > I have problem with lm_sensors (Ver: 2.8.7 Release: 4mdk) in my new > Mandrake 10.1 (kernel 2.6.8.1-24mdk). HW: QDI KinetiZ 7EA (via > kt133a/686b), Duron 866, DIMM 128 + DIMM 64 > > On my Mandrake 9.2 (kernel 2.4.22) was everything OK. DIMM modules > were identified, via686 sensors too and all was accesable via > /proc/sys/dev/sensors too. > > Now: > 1. there is no interface in /proc ?! (module i2c-proc (like in > lm_sensors for 2.4 kernel ?)) > 2. eeprom module gives no information In 2.6 the sensors data is found under /sys/bus/i2c/. i2c-proc was (more or less) renamed to i2c-sensor. Up to 2.6.10, i2c-viapro and via686a conflict with each other, so only the first one loaded will work, as you could see. You need i2c-viapro to access the EEPROMs, and via686a for the sensors, which is why you can't get both at the same time. This was fixed in 2.6.11. Hope that helps, -- Jean Delvare
