Hi Greg,
This is a new hardware monitoring driver, w83627ehf, which supports the
Winbond W83627EHF Super-I/O chip. The driver is not complete, but
already usable. It only implements fan speed and temperature monitoring,
while the chip also supports voltage inputs with VID, PWM output and
temperature sensor selection. I have no more time to work on this, but
anyone with supported hardware could add the missing functionalities
later.
This driver is largely derived from the w83627hf driver.
Thanks to Leon Moonen and Steve Cliffe for tesing the preliminary
versions of my driver and reporting the problems they encountered.
Thanks to Grant Coady for discovering mishandled corner cases in the fan
clock divider selection algorithm. This second version of the driver
hopefully addresses all the issues the original version had.
Please apply,
thanks.
Signed-off-by: Jean Delvare <khali at linux-fr.org>
drivers/i2c/chips/Kconfig | 14
drivers/i2c/chips/Makefile | 1
drivers/i2c/chips/w83627ehf.c | 837 ++++++++++++++++++++++++++++++++++++++++++
3 files changed, 852 insertions(+)
Index: linux-2.6.12-rc3/drivers/i2c/chips/Kconfig
===================================================================
--- linux-2.6.12-rc3.orig/drivers/i2c/chips/Kconfig 2005-04-24 10:24:29.000000000 +0200
+++ linux-2.6.12-rc3/drivers/i2c/chips/Kconfig 2005-04-24 10:25:41.000000000 +0200
@@ -360,6 +360,20 @@
This driver can also be built as a module. If so, the module
will be called w83627hf.
+config SENSORS_W83627EHF
+ tristate "Winbond W83627EHF"
+ depends on I2C && EXPERIMENTAL
+ select I2C_SENSOR
+ select I2C_ISA
+ help
+ If you say yes here you get preliminary support for the hardware
+ monitoring functionality of the Winbond W83627EHF Super-I/O chip.
+ Only fan and temperature inputs are supported at the moment, while
+ the chip does much more than that.
+
+ This driver can also be built as a module. If so, the module
+ will be called w83627ehf.
+
endmenu
menu "Other I2C Chip support"
Index: linux-2.6.12-rc3/drivers/i2c/chips/Makefile
===================================================================
--- linux-2.6.12-rc3.orig/drivers/i2c/chips/Makefile 2005-04-24 10:24:29.000000000 +0200
+++ linux-2.6.12-rc3/drivers/i2c/chips/Makefile 2005-04-24 10:25:41.000000000 +0200
@@ -39,6 +39,7 @@
obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o
obj-$(CONFIG_SENSORS_SMSC47M1) += smsc47m1.o
obj-$(CONFIG_SENSORS_VIA686A) += via686a.o
+obj-$(CONFIG_SENSORS_W83627EHF) += w83627ehf.o
obj-$(CONFIG_SENSORS_W83L785TS) += w83l785ts.o
obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o
Index: linux-2.6.12-rc3/drivers/i2c/chips/w83627ehf.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.12-rc3/drivers/i2c/chips/w83627ehf.c 2005-04-24 10:55:48.000000000 +0200
@@ -0,0 +1,837 @@
+/*
+ w83627ehf - Driver for the hardware monitoring functionality of
+ the Winbond W83627EHF Super-I/O chip
+ Copyright (C) 2005 Jean Delvare <khali at linux-fr.org>
+
+ Shamelessly ripped from the w83627hf driver
+ Copyright (C) 2003 Mark Studebaker
+
+ Thanks to Leon Moonen, Steve Cliffe and Grant Coady for their help
+ in testing and debugging this driver.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+
+ Supports the following chips:
+
+ Chip #vin #fan #pwm #temp chip_id man_id
+ w83627ehf - 5 - 3 0x88 0x5ca3
+
+ This is a preliminary version of the driver, only supporting the
+ fan and temperature inputs. The chip does much more than that.
+*/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+#include <asm/io.h>
+#include "lm75.h"
+
+/* Addresses to scan
+ The actual ISA address is read from Super-I/O configuration space */
+static unsigned short normal_i2c[] = { I2C_CLIENT_END };
+static unsigned int normal_isa[] = { 0, I2C_CLIENT_ISA_END };
+
+/* Insmod parameters */
+SENSORS_INSMOD_1(w83627ehf);
+
+/*
+ * Super-I/O constants and functions
+ */
+
+static int REG; /* The register to read/write */
+static int VAL; /* The value to read/write */
+
+#define W83627EHF_LD_HWM 0x0b
+
+#define SIO_REG_LDSEL 0x07 /* Logical device select */
+#define SIO_REG_DEVID 0x20 /* Device ID (2 bytes) */
+#define SIO_REG_ENABLE 0x30 /* Logical device enable */
+#define SIO_REG_ADDR 0x60 /* Logical device address (2 bytes) */
+
+#define SIO_W83627EHF_ID 0x8840
+#define SIO_ID_MASK 0xFFC0
+
+static inline void
+superio_outb(int reg, int val)
+{
+ outb(reg, REG);
+ outb(val, VAL);
+}
+
+static inline int
+superio_inb(int reg)
+{
+ outb(reg, REG);
+ return inb(VAL);
+}
+
+static inline void
+superio_select(int ld)
+{
+ outb(SIO_REG_LDSEL, REG);
+ outb(ld, VAL);
+}
+
+static inline void
+superio_enter(void)
+{
+ outb(0x87, REG);
+ outb(0x87, REG);
+}
+
+static inline void
+superio_exit(void)
+{
+ outb(0x02, REG);
+ outb(0x02, VAL);
+}
+
+/*
+ * ISA constants
+ */
+
+#define REGION_LENGTH 8
+#define ADDR_REG_OFFSET 5
+#define DATA_REG_OFFSET 6
+
+#define W83627EHF_REG_BANK 0x4E
+#define W83627EHF_REG_CONFIG 0x40
+#define W83627EHF_REG_CHIP_ID 0x49
+#define W83627EHF_REG_MAN_ID 0x4F
+
+static const u16 W83627EHF_REG_FAN[] = { 0x28, 0x29, 0x2a, 0x3f, 0x553 };
+static const u16 W83627EHF_REG_FAN_MIN[] = { 0x3b, 0x3c, 0x3d, 0x3e, 0x55c };
+
+#define W83627EHF_REG_TEMP1 0x27
+#define W83627EHF_REG_TEMP1_HYST 0x3a
+#define W83627EHF_REG_TEMP1_OVER 0x39
+static const u16 W83627EHF_REG_TEMP[] = { 0x150, 0x250 };
+static const u16 W83627EHF_REG_TEMP_HYST[] = { 0x153, 0x253 };
+static const u16 W83627EHF_REG_TEMP_OVER[] = { 0x155, 0x255 };
+static const u16 W83627EHF_REG_TEMP_CONFIG[] = { 0x152, 0x252 };
+
+/* Fan clock dividers are spread over the following five registers */
+#define W83627EHF_REG_FANDIV1 0x47
+#define W83627EHF_REG_FANDIV2 0x4B
+#define W83627EHF_REG_VBAT 0x5D
+#define W83627EHF_REG_DIODE 0x59
+#define W83627EHF_REG_SMI_OVT 0x4C
+
+/*
+ * Conversions
+ */
+
+static inline unsigned int
+fan_from_reg(u8 reg, unsigned int div)
+{
+ if (reg == 0 || reg == 255)
+ return 0;
+ return 1350000U / (reg * div);
+}
+
+static inline unsigned int
+div_from_reg(u8 reg)
+{
+ return 1 << reg;
+}
+
+static inline int
+temp1_from_reg(s8 reg)
+{
+ return reg * 1000;
+}
+
+static inline s8
+temp1_to_reg(int temp)
+{
+ if (temp <= -128000)
+ return -128;
+ if (temp >= 127000)
+ return 127;
+ if (temp < 0)
+ return (temp - 500) / 1000;
+ return (temp + 500) / 1000;
+}
+
+/*
+ * Data structures and manipulation thereof
+ */
+
+struct w83627ehf_data {
+ struct i2c_client client;
+ struct semaphore lock;
+
+ struct semaphore update_lock;
+ char valid; /* !=0 if following fields are valid */
+ unsigned long last_updated; /* In jiffies */
+
+ /* Register values */
+ u8 fan[5];
+ u8 fan_min[5];
+ u8 fan_div[5];
+ u8 has_fan; /* some fan inputs can be disabled */
+ s8 temp1;
+ s8 temp1_max;
+ s8 temp1_max_hyst;
+ s16 temp[2];
+ s16 temp_max[2];
+ s16 temp_max_hyst[2];
+};
+
+static inline int is_word_sized(u16 reg)
+{
+ return (((reg & 0xff00) == 0x100
+ || (reg & 0xff00) == 0x200)
+ && ((reg & 0x00ff) == 0x50
+ || (reg & 0x00ff) == 0x53
+ || (reg & 0x00ff) == 0x55));
+}
+
+/* We assume that the default bank is 0, thus the following two functions do
+ nothing for registers which live in bank 0. For others, they respectively
+ set the bank register to the correct value (before the register is
+ accessed), and back to 0 (afterwards). */
+static inline void w83627ehf_set_bank(struct i2c_client *client, u16 reg)
+{
+ if (reg & 0xff00) {
+ outb_p(W83627EHF_REG_BANK, client->addr + ADDR_REG_OFFSET);
+ outb_p(reg >> 8, client->addr + DATA_REG_OFFSET);
+ }
+}
+
+static inline void w83627ehf_reset_bank(struct i2c_client *client, u16 reg)
+{
+ if (reg & 0xff00) {
+ outb_p(W83627EHF_REG_BANK, client->addr + ADDR_REG_OFFSET);
+ outb_p(0, client->addr + DATA_REG_OFFSET);
+ }
+}
+
+static u16 w83627ehf_read_value(struct i2c_client *client, u16 reg)
+{
+ struct w83627ehf_data *data = i2c_get_clientdata(client);
+ int res, word_sized = is_word_sized(reg);
+
+ down(&data->lock);
+
+ w83627ehf_set_bank(client, reg);
+ outb_p(reg & 0xff, client->addr + ADDR_REG_OFFSET);
+ res = inb_p(client->addr + DATA_REG_OFFSET);
+ if (word_sized) {
+ outb_p((reg & 0xff) + 1,
+ client->addr + ADDR_REG_OFFSET);
+ res = (res << 8) + inb_p(client->addr + DATA_REG_OFFSET);
+ }
+ w83627ehf_reset_bank(client, reg);
+
+ up(&data->lock);
+
+ return res;
+}
+
+static int w83627ehf_write_value(struct i2c_client *client, u16 reg, u16 value)
+{
+ struct w83627ehf_data *data = i2c_get_clientdata(client);
+ int word_sized = is_word_sized(reg);
+
+ down(&data->lock);
+
+ w83627ehf_set_bank(client, reg);
+ outb_p(reg & 0xff, client->addr + ADDR_REG_OFFSET);
+ if (word_sized) {
+ outb_p(value >> 8, client->addr + DATA_REG_OFFSET);
+ outb_p((reg & 0xff) + 1,
+ client->addr + ADDR_REG_OFFSET);
+ }
+ outb_p(value & 0xff, client->addr + DATA_REG_OFFSET);
+ w83627ehf_reset_bank(client, reg);
+
+ up(&data->lock);
+ return 0;
+}
+
+/* This function assumes that the caller holds data->update_lock */
+static void w83627ehf_write_fan_div(struct i2c_client *client, int nr)
+{
+ struct w83627ehf_data *data = i2c_get_clientdata(client);
+ u8 reg;
+
+ switch (nr) {
+ case 0:
+ reg = (w83627ehf_read_value(client, W83627EHF_REG_FANDIV1) & 0xcf)
+ | ((data->fan_div[0] & 0x03) << 4);
+ w83627ehf_write_value(client, W83627EHF_REG_FANDIV1, reg);
+ reg = (w83627ehf_read_value(client, W83627EHF_REG_VBAT) & 0xdf)
+ | ((data->fan_div[0] & 0x04) << 3);
+ w83627ehf_write_value(client, W83627EHF_REG_VBAT, reg);
+ break;
+ case 1:
+ reg = (w83627ehf_read_value(client, W83627EHF_REG_FANDIV1) & 0x3f)
+ | ((data->fan_div[1] & 0x03) << 6);
+ w83627ehf_write_value(client, W83627EHF_REG_FANDIV1, reg);
+ reg = (w83627ehf_read_value(client, W83627EHF_REG_VBAT) & 0xbf)
+ | ((data->fan_div[1] & 0x04) << 4);
+ w83627ehf_write_value(client, W83627EHF_REG_VBAT, reg);
+ break;
+ case 2:
+ reg = (w83627ehf_read_value(client, W83627EHF_REG_FANDIV2) & 0x3f)
+ | ((data->fan_div[2] & 0x03) << 6);
+ w83627ehf_write_value(client, W83627EHF_REG_FANDIV2, reg);
+ reg = (w83627ehf_read_value(client, W83627EHF_REG_VBAT) & 0x7f)
+ | ((data->fan_div[2] & 0x04) << 5);
+ w83627ehf_write_value(client, W83627EHF_REG_VBAT, reg);
+ break;
+ case 3:
+ reg = (w83627ehf_read_value(client, W83627EHF_REG_DIODE) & 0xfc)
+ | (data->fan_div[3] & 0x03);
+ w83627ehf_write_value(client, W83627EHF_REG_DIODE, reg);
+ reg = (w83627ehf_read_value(client, W83627EHF_REG_SMI_OVT) & 0x7f)
+ | ((data->fan_div[3] & 0x04) << 5);
+ w83627ehf_write_value(client, W83627EHF_REG_SMI_OVT, reg);
+ break;
+ case 4:
+ reg = (w83627ehf_read_value(client, W83627EHF_REG_DIODE) & 0x73)
+ | ((data->fan_div[4] & 0x03) << 3)
+ | ((data->fan_div[4] & 0x04) << 5);
+ w83627ehf_write_value(client, W83627EHF_REG_DIODE, reg);
+ break;
+ }
+}
+
+static struct w83627ehf_data *w83627ehf_update_device(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83627ehf_data *data = i2c_get_clientdata(client);
+ int i;
+
+ down(&data->update_lock);
+
+ if (time_after(jiffies, data->last_updated + HZ)
+ || !data->valid) {
+ /* Fan clock dividers */
+ i = w83627ehf_read_value(client, W83627EHF_REG_FANDIV1);
+ data->fan_div[0] = (i >> 4) & 0x03;
+ data->fan_div[1] = (i >> 6) & 0x03;
+ i = w83627ehf_read_value(client, W83627EHF_REG_FANDIV2);
+ data->fan_div[2] = (i >> 6) & 0x03;
+ i = w83627ehf_read_value(client, W83627EHF_REG_VBAT);
+ data->fan_div[0] |= (i >> 3) & 0x04;
+ data->fan_div[1] |= (i >> 4) & 0x04;
+ data->fan_div[2] |= (i >> 5) & 0x04;
+ if (data->has_fan & ((1 << 3) | (1 << 4))) {
+ i = w83627ehf_read_value(client, W83627EHF_REG_DIODE);
+ data->fan_div[3] = i & 0x03;
+ data->fan_div[4] = ((i >> 2) & 0x03)
+ | ((i >> 5) & 0x04);
+ }
+ if (data->has_fan & (1 << 3)) {
+ i = w83627ehf_read_value(client, W83627EHF_REG_SMI_OVT);
+ data->fan_div[3] |= (i >> 5) & 0x04;
+ }
+
+ /* Measured fan speeds and limits */
+ for (i = 0; i < 5; i++) {
+ if (!(data->has_fan & (1 << i)))
+ continue;
+
+ data->fan[i] = w83627ehf_read_value(client,
+ W83627EHF_REG_FAN[i]);
+ data->fan_min[i] = w83627ehf_read_value(client,
+ W83627EHF_REG_FAN_MIN[i]);
+
+ /* If we failed to measure the fan speed and clock
+ divider can be increased, let's try that for next
+ time */
+ if (data->fan[i] == 0xff
+ && data->fan_div[i] != 0x07) {
+ dev_dbg(&client->dev, "Increasing fan %d "
+ "clock divider from %u to %u\n",
+ i, div_from_reg(data->fan_div[i]),
+ div_from_reg(data->fan_div[i] + 1));
+ data->fan_div[i]++;
+ w83627ehf_write_fan_div(client, i);
+ /* Preserve min limit */
+ w83627ehf_write_value(client,
+ W83627EHF_REG_FAN_MIN[i],
+ (data->fan_min[i] /= 2));
+ }
+ }
+
+ /* Measured temperatures and limits */
+ data->temp1 = w83627ehf_read_value(client,
+ W83627EHF_REG_TEMP1);
+ data->temp1_max = w83627ehf_read_value(client,
+ W83627EHF_REG_TEMP1_OVER);
+ data->temp1_max_hyst = w83627ehf_read_value(client,
+ W83627EHF_REG_TEMP1_HYST);
+ for (i = 0; i < 2; i++) {
+ data->temp[i] = w83627ehf_read_value(client,
+ W83627EHF_REG_TEMP[i]);
+ data->temp_max[i] = w83627ehf_read_value(client,
+ W83627EHF_REG_TEMP_OVER[i]);
+ data->temp_max_hyst[i] = w83627ehf_read_value(client,
+ W83627EHF_REG_TEMP_HYST[i]);
+ }
+
+ data->last_updated = jiffies;
+ data->valid = 1;
+ }
+
+ up(&data->update_lock);
+ return data;
+}
+
+/*
+ * Sysfs callback functions
+ */
+
+#define show_fan_reg(reg) \
+static ssize_t \
+show_##reg(struct device *dev, char *buf, int nr) \
+{ \
+ struct w83627ehf_data *data = w83627ehf_update_device(dev); \
+ return sprintf(buf, "%d\n", \
+ fan_from_reg(data->reg[nr], \
+ div_from_reg(data->fan_div[nr]))); \
+}
+show_fan_reg(fan);
+show_fan_reg(fan_min);
+
+static ssize_t
+show_fan_div(struct device *dev, char *buf, int nr)
+{
+ struct w83627ehf_data *data = w83627ehf_update_device(dev);
+ return sprintf(buf, "%u\n",
+ div_from_reg(data->fan_div[nr]));
+}
+
+static ssize_t
+store_fan_min(struct device *dev, const char *buf, size_t count, int nr)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83627ehf_data *data = i2c_get_clientdata(client);
+ unsigned int val = simple_strtoul(buf, NULL, 10);
+ unsigned int reg;
+ u8 new_div;
+
+ down(&data->update_lock);
+ if (!val) {
+ /* No min limit, alarm disabled */
+ data->fan_min[nr] = 255;
+ new_div = data->fan_div[nr]; /* No change */
+ dev_info(dev, "fan%u low limit and alarm disabled\n", nr + 1);
+ } else if ((reg = 1350000U / val) >= 128 * 255) {
+ /* Speed below this value cannot possibly be represented,
+ even with the highest divider (128) */
+ data->fan_min[nr] = 254;
+ new_div = 7; /* 128 == (1 << 7) */
+ dev_warn(dev, "fan%u low limit %u below minimum %u, set to "
+ "minimum\n", nr + 1, val, fan_from_reg(254, 128));
+ } else if (!reg) {
+ /* Speed above this value cannot possibly be represented,
+ even with the lowest divider (1) */
+ data->fan_min[nr] = 1;
+ new_div = 0; /* 1 == (1 << 0) */
+ dev_warn(dev, "fan%u low limit %u above maximum %u, set to "
+ "maximum\n", nr + 1, val, fan_from_reg(1, 0));
+ } else {
+ /* Automatically pick the best divider, i.e. the one such
+ that the min limit will correspond to a register value
+ in the 96..192 range */
+ new_div = 0;
+ while (reg > 192 && new_div < 7) {
+ reg >>= 1;
+ new_div++;
+ }
+ data->fan_min[nr] = reg;
+ }
+
+ /* Write both the fan clock divider (if it changed) and the new
+ fan min (unconditionally) */
+ if (new_div != data->fan_div[nr]) {
+ if (new_div > data->fan_div[nr])
+ data->fan[nr] >>= (data->fan_div[nr] - new_div);
+ else
+ data->fan[nr] <<= (new_div - data->fan_div[nr]);
+
+ dev_dbg(dev, "fan%u clock divider changed from %u to %u\n",
+ nr + 1, div_from_reg(data->fan_div[nr]),
+ div_from_reg(new_div));
+ data->fan_div[nr] = new_div;
+ w83627ehf_write_fan_div(client, nr);
+ }
+ w83627ehf_write_value(client, W83627EHF_REG_FAN_MIN[nr],
+ data->fan_min[nr]);
+ up(&data->update_lock);
+
+ return count;
+}
+
+#define sysfs_fan_offset(offset) \
+static ssize_t \
+show_reg_fan_##offset(struct device *dev, char *buf) \
+{ \
+ return show_fan(dev, buf, offset-1); \
+} \
+static DEVICE_ATTR(fan##offset##_input, S_IRUGO, \
+ show_reg_fan_##offset, NULL);
+
+#define sysfs_fan_min_offset(offset) \
+static ssize_t \
+show_reg_fan##offset##_min(struct device *dev, char *buf) \
+{ \
+ return show_fan_min(dev, buf, offset-1); \
+} \
+static ssize_t \
+store_reg_fan##offset##_min(struct device *dev, const char *buf, \
+ size_t count) \
+{ \
+ return store_fan_min(dev, buf, count, offset-1); \
+} \
+static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \
+ show_reg_fan##offset##_min, \
+ store_reg_fan##offset##_min);
+
+#define sysfs_fan_div_offset(offset) \
+static ssize_t \
+show_reg_fan##offset##_div(struct device *dev, char *buf) \
+{ \
+ return show_fan_div(dev, buf, offset - 1); \
+} \
+static DEVICE_ATTR(fan##offset##_div, S_IRUGO, \
+ show_reg_fan##offset##_div, NULL);
+
+sysfs_fan_offset(1);
+sysfs_fan_min_offset(1);
+sysfs_fan_div_offset(1);
+sysfs_fan_offset(2);
+sysfs_fan_min_offset(2);
+sysfs_fan_div_offset(2);
+sysfs_fan_offset(3);
+sysfs_fan_min_offset(3);
+sysfs_fan_div_offset(3);
+sysfs_fan_offset(4);
+sysfs_fan_min_offset(4);
+sysfs_fan_div_offset(4);
+sysfs_fan_offset(5);
+sysfs_fan_min_offset(5);
+sysfs_fan_div_offset(5);
+
+#define show_temp1_reg(reg) \
+static ssize_t \
+show_##reg(struct device *dev, char *buf) \
+{ \
+ struct w83627ehf_data *data = w83627ehf_update_device(dev); \
+ return sprintf(buf, "%d\n", temp1_from_reg(data->reg)); \
+}
+show_temp1_reg(temp1);
+show_temp1_reg(temp1_max);
+show_temp1_reg(temp1_max_hyst);
+
+#define store_temp1_reg(REG, reg) \
+static ssize_t \
+store_temp1_##reg(struct device *dev, const char *buf, size_t count) \
+{ \
+ struct i2c_client *client = to_i2c_client(dev); \
+ struct w83627ehf_data *data = i2c_get_clientdata(client); \
+ u32 val = simple_strtoul(buf, NULL, 10); \
+ \
+ down(&data->update_lock); \
+ data->temp1_##reg = temp1_to_reg(val); \
+ w83627ehf_write_value(client, W83627EHF_REG_TEMP1_##REG, \
+ data->temp1_##reg); \
+ up(&data->update_lock); \
+ return count; \
+}
+store_temp1_reg(OVER, max);
+store_temp1_reg(HYST, max_hyst);
+
+static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp1, NULL);
+static DEVICE_ATTR(temp1_max, S_IRUGO| S_IWUSR,
+ show_temp1_max, store_temp1_max);
+static DEVICE_ATTR(temp1_max_hyst, S_IRUGO| S_IWUSR,
+ show_temp1_max_hyst, store_temp1_max_hyst);
+
+#define show_temp_reg(reg) \
+static ssize_t \
+show_##reg (struct device *dev, char *buf, int nr) \
+{ \
+ struct w83627ehf_data *data = w83627ehf_update_device(dev); \
+ return sprintf(buf, "%d\n", \
+ LM75_TEMP_FROM_REG(data->reg[nr])); \
+}
+show_temp_reg(temp);
+show_temp_reg(temp_max);
+show_temp_reg(temp_max_hyst);
+
+#define store_temp_reg(REG, reg) \
+static ssize_t \
+store_##reg (struct device *dev, const char *buf, size_t count, int nr) \
+{ \
+ struct i2c_client *client = to_i2c_client(dev); \
+ struct w83627ehf_data *data = i2c_get_clientdata(client); \
+ u32 val = simple_strtoul(buf, NULL, 10); \
+ \
+ down(&data->update_lock); \
+ data->reg[nr] = LM75_TEMP_TO_REG(val); \
+ w83627ehf_write_value(client, W83627EHF_REG_TEMP_##REG[nr], \
+ data->reg[nr]); \
+ up(&data->update_lock); \
+ return count; \
+}
+store_temp_reg(OVER, temp_max);
+store_temp_reg(HYST, temp_max_hyst);
+
+#define sysfs_temp_offset(offset) \
+static ssize_t \
+show_reg_temp##offset (struct device *dev, char *buf) \
+{ \
+ return show_temp(dev, buf, offset - 2); \
+} \
+static DEVICE_ATTR(temp##offset##_input, S_IRUGO, \
+ show_reg_temp##offset, NULL);
+
+#define sysfs_temp_reg_offset(reg, offset) \
+static ssize_t \
+show_reg_temp##offset##_##reg(struct device *dev, char *buf) \
+{ \
+ return show_temp_##reg(dev, buf, offset - 2); \
+} \
+static ssize_t \
+store_reg_temp##offset##_##reg(struct device *dev, const char *buf, \
+ size_t count) \
+{ \
+ return store_temp_##reg(dev, buf, count, offset - 2); \
+} \
+static DEVICE_ATTR(temp##offset##_##reg, S_IRUGO| S_IWUSR, \
+ show_reg_temp##offset##_##reg, \
+ store_reg_temp##offset##_##reg);
+
+sysfs_temp_offset(2);
+sysfs_temp_reg_offset(max, 2);
+sysfs_temp_reg_offset(max_hyst, 2);
+sysfs_temp_offset(3);
+sysfs_temp_reg_offset(max, 3);
+sysfs_temp_reg_offset(max_hyst, 3);
+
+/*
+ * Driver and client management
+ */
+
+static struct i2c_driver w83627ehf_driver;
+
+static void w83627ehf_init_client(struct i2c_client *client)
+{
+ int i;
+ u8 tmp;
+
+ /* Start monitoring is needed */
+ tmp = w83627ehf_read_value(client, W83627EHF_REG_CONFIG);
+ if (!(tmp & 0x01))
+ w83627ehf_write_value(client, W83627EHF_REG_CONFIG,
+ tmp | 0x01);
+
+ /* Enable temp2 and temp3 if needed */
+ for (i = 0; i < 2; i++) {
+ tmp = w83627ehf_read_value(client,
+ W83627EHF_REG_TEMP_CONFIG[i]);
+ if (tmp & 0x01)
+ w83627ehf_write_value(client,
+ W83627EHF_REG_TEMP_CONFIG[i],
+ tmp & 0xfe);
+ }
+}
+
+int w83627ehf_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+ struct i2c_client *client;
+ struct w83627ehf_data *data;
+ int i, err = 0;
+
+ if (!i2c_is_isa_adapter(adapter))
+ return 0;
+
+ if (!request_region(address, REGION_LENGTH, w83627ehf_driver.name)) {
+ err = -EBUSY;
+ goto exit;
+ }
+
+ if (!(data = kmalloc(sizeof(struct w83627ehf_data), GFP_KERNEL))) {
+ err = -ENOMEM;
+ goto exit_release;
+ }
+ memset(data, 0, sizeof(struct w83627ehf_data));
+
+ client = &data->client;
+ i2c_set_clientdata(client, data);
+ client->addr = address;
+ init_MUTEX(&data->lock);
+ client->adapter = adapter;
+ client->driver = &w83627ehf_driver;
+ client->flags = 0;
+
+ strlcpy(client->name, "w83627ehf", I2C_NAME_SIZE);
+ data->valid = 0;
+ init_MUTEX(&data->update_lock);
+
+ /* Tell the i2c layer a new client has arrived */
+ if ((err = i2c_attach_client(client)))
+ goto exit_free;
+
+ /* Initialize the chip */
+ w83627ehf_init_client(client);
+
+ /* A few vars need to be filled upon startup */
+ for (i = 0; i < 5; i++)
+ data->fan_min[i] = w83627ehf_read_value(client,
+ W83627EHF_REG_FAN_MIN[i]);
+
+ /* It looks like fan4 and fan5 pins can be alternatively used
+ as fan on/off switches */
+ data->has_fan = 0x07; /* fan1, fan2 and fan3 */
+ i = w83627ehf_read_value(client, W83627EHF_REG_FANDIV1);
+ if (i & (1 << 2))
+ data->has_fan |= (1 << 3);
+ if (i & (1 << 0))
+ data->has_fan |= (1 << 4);
+
+ /* Register sysfs hooks */
+ device_create_file(&client->dev, &dev_attr_fan1_input);
+ device_create_file(&client->dev, &dev_attr_fan1_min);
+ device_create_file(&client->dev, &dev_attr_fan1_div);
+ device_create_file(&client->dev, &dev_attr_fan2_input);
+ device_create_file(&client->dev, &dev_attr_fan2_min);
+ device_create_file(&client->dev, &dev_attr_fan2_div);
+ device_create_file(&client->dev, &dev_attr_fan3_input);
+ device_create_file(&client->dev, &dev_attr_fan3_min);
+ device_create_file(&client->dev, &dev_attr_fan3_div);
+
+ if (data->has_fan & (1 << 3)) {
+ device_create_file(&client->dev, &dev_attr_fan4_input);
+ device_create_file(&client->dev, &dev_attr_fan4_min);
+ device_create_file(&client->dev, &dev_attr_fan4_div);
+ }
+ if (data->has_fan & (1 << 4)) {
+ device_create_file(&client->dev, &dev_attr_fan5_input);
+ device_create_file(&client->dev, &dev_attr_fan5_min);
+ device_create_file(&client->dev, &dev_attr_fan5_div);
+ }
+
+ device_create_file(&client->dev, &dev_attr_temp1_input);
+ device_create_file(&client->dev, &dev_attr_temp1_max);
+ device_create_file(&client->dev, &dev_attr_temp1_max_hyst);
+ device_create_file(&client->dev, &dev_attr_temp2_input);
+ device_create_file(&client->dev, &dev_attr_temp2_max);
+ device_create_file(&client->dev, &dev_attr_temp2_max_hyst);
+ device_create_file(&client->dev, &dev_attr_temp3_input);
+ device_create_file(&client->dev, &dev_attr_temp3_max);
+ device_create_file(&client->dev, &dev_attr_temp3_max_hyst);
+
+ return 0;
+
+exit_free:
+ kfree(data);
+exit_release:
+ release_region(address, REGION_LENGTH);
+exit:
+ return err;
+}
+
+static int w83627ehf_attach_adapter(struct i2c_adapter *adapter)
+{
+ if (!(adapter->class & I2C_CLASS_HWMON))
+ return 0;
+ return i2c_detect(adapter, &addr_data, w83627ehf_detect);
+}
+
+static int w83627ehf_detach_client(struct i2c_client *client)
+{
+ int err;
+
+ if ((err = i2c_detach_client(client))) {
+ dev_err(&client->dev, "Client deregistration failed, "
+ "client not detached.\n");
+ return err;
+ }
+ release_region(client->addr, REGION_LENGTH);
+ kfree(i2c_get_clientdata(client));
+
+ return 0;
+}
+
+static struct i2c_driver w83627ehf_driver = {
+ .owner = THIS_MODULE,
+ .name = "w83627ehf",
+ .flags = I2C_DF_NOTIFY,
+ .attach_adapter = w83627ehf_attach_adapter,
+ .detach_client = w83627ehf_detach_client,
+};
+
+static int __init w83627ehf_find(int sioaddr, int *address)
+{
+ u16 val;
+
+ REG = sioaddr;
+ VAL = sioaddr + 1;
+ superio_enter();
+
+ val = (superio_inb(SIO_REG_DEVID) << 8)
+ | superio_inb(SIO_REG_DEVID + 1);
+ if ((val & SIO_ID_MASK) != SIO_W83627EHF_ID) {
+ superio_exit();
+ return -ENODEV;
+ }
+
+ superio_select(W83627EHF_LD_HWM);
+ val = (superio_inb(SIO_REG_ADDR) << 8)
+ | superio_inb(SIO_REG_ADDR + 1);
+ *address = val & ~(REGION_LENGTH - 1);
+ if (*address == 0) {
+ superio_exit();
+ return -ENODEV;
+ }
+
+ /* Activate logical device if needed */
+ val = superio_inb(SIO_REG_ENABLE);
+ if (!(val & 0x01))
+ superio_outb(SIO_REG_ENABLE, val | 0x01);
+
+ superio_exit();
+ return 0;
+}
+
+static int __init sensors_w83627ehf_init(void)
+{
+ if (w83627ehf_find(0x2e, &normal_isa[0])
+ && w83627ehf_find(0x4e, &normal_isa[0]))
+ return -ENODEV;
+
+ return i2c_add_driver(&w83627ehf_driver);
+}
+
+static void __exit sensors_w83627ehf_exit(void)
+{
+ i2c_del_driver(&w83627ehf_driver);
+}
+
+MODULE_AUTHOR("Jean Delvare <khali at linux-fr.org>");
+MODULE_DESCRIPTION("W83627EHF driver");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_w83627ehf_init);
+module_exit(sensors_w83627ehf_exit);
--
Jean Delvare
