Need assistance with enabling the SMBus on an Intel 855PM 82801DB

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Bradley,

> Unfortunately, the only thing sensors-detect found was an SPD EEPROM,
> telling me that I have 512MB of memory installed :-((((
> 
> Either there is nothing attached to my SMBus or it wasn't detected by
> sensors-detect.

You may try using i2cdetect (after loading the i2c-dev kernel module) on
that bus. If there are responsive addresses other than 0x08, 0x44,
0x50-0x57 and 0x69, this might be a hardware monitoring chip, in which
case you can send the output of i2cdump for it and we'll investigate.

-- 
Jean Delvare



[Index of Archives]     [Linux Kernel]     [Linux Hardware Monitoring]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux