Hi Rudolf
Please check the log message in attachment and the output message below.
i2cdump 0 0x50 --> message1
i2cdump 0 0x50 c --> message2
i2cdump 0 0x51 c --> message3
i2cdump 0 0x51 --> message4
i2cdump 0 0x2f --> message5
i2cdump 0 0x50 c --> message6
[root@ ~]# modprobe eeprom
[root@ ~]# sensors --> message7
==============================================
[root@ ~]# lsmod|grep i2c
i2c_dev 12800 0
i2c_ali1563 10116 0
i2c_core 25728 2 i2c_dev,i2c_ali1563
[root@ ~]# i2cdump 0 0x50
No size specified (using byte-data access)
WARNING! This program can confuse your I2C bus, cause data loss and worse!
I will probe file /dev/i2c-0, address 0x50, mode byte
Continue? [Y/n]
0 1 2 3 4 5 6 7 8 9 a b c d e f 0123456789abcdef
00: ac 00 07 0c 0a 01 48 00 04 75 75 02 80 08 08 01 ?.????H.?uu?????
10: 0e 04 0c 01 02 26 00 a0 75 00 00 50 3c 50 30 20 ?????&.?u..P<P0
20: ac 00 50 50 00 00 00 00 00 41 4b 30 32 75 00 00 ?.PP.....AK02u..
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1a ...............?
40: ac 00 00 00 00 00 00 bb ff 00 00 00 00 00 00 00 ?......?........
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
60: ac 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ?...............
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
80: ac 00 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ?...............
90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
a0: ac 00 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ?...............
b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
c0: ac 00 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ?...............
d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
e0: ac 00 ac ff ff ff ff ff ff ff ff ff ff ff ff ff ?.?.............
f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
[root@ ~]# i2cdump 0 0x50 c
WARNING! This program can confuse your I2C bus, cause data loss and worse!
I will probe file /dev/i2c-0, address 0x50, mode byte consecutive read
Continue? [Y/n]
0 1 2 3 4 5 6 7 8 9 a b c d e f 0123456789abcdef
00: ff ac 00 07 0c 0a 01 48 00 04 75 75 02 80 08 08 .?.????H.?uu????
10: 01 0e 04 0c 01 02 26 00 a0 75 00 00 50 3c 50 30 ??????&.?u..P<P0
20: 20 ac 00 50 50 00 00 00 00 00 41 4b 30 32 75 00 ?.PP.....AK02u.
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
40: 1a ac 00 00 00 00 00 00 bb ff 00 00 00 00 00 00 ??......?.......
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
60: 00 ac 00 00 00 00 00 00 00 00 00 00 00 00 00 00 .?..............
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
80: 00 ac 00 ff ff ff ff ff ff ff ff ff ff ff ff ff .?..............
90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
a0: ff ac 00 ff ff ff ff ff ff ff ff ff ff ff ff ff .?..............
b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
c0: ff ac 00 ff ff ff ff ff ff ff ff ff ff ff ff ff .?..............
d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
e0: ff ac 00 ac ff ff ff ff ff ff ff ff ff ff ff ff .?.?............
f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
[root@ ~]# i2cdump 0 0x51 c
WARNING! This program can confuse your I2C bus, cause data loss and worse!
I will probe file /dev/i2c-0, address 0x51, mode byte consecutive read
Continue? [Y/n]
0 1 2 3 4 5 6 7 8 9 a b c d e f 0123456789abcdef
00: ff ac ff 07 0c 0a 01 48 00 04 75 75 02 80 08 08 .?.????H.?uu????
10: 01 0e 04 0c 01 02 26 00 a0 75 00 00 50 3c 50 30 ??????&.?u..P<P0
20: 20 00 00 50 50 00 00 00 00 00 41 4b 30 32 75 00 ..PP.....AK02u.
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
40: 1a 80 00 00 00 00 00 00 bb ff 00 00 00 00 00 00 ??......?.......
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
80: 00 80 00 ff ff ff ff ff ff ff ff ff ff ff ff ff .?..............
90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
a0: ff 00 00 ff ff ff ff ff ff ff ff ff ff ff ff ff ................
b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
c0: ff 80 00 ff ff ff ff ff ff ff ff ff ff ff ff ff .?..............
d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
e0: ff 00 00 ac ff ff ff ff ff ff ff ff ff ff ff ff ...?............
f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
[root@ ~]# i2cdump 0 0x51
No size specified (using byte-data access)
WARNING! This program can confuse your I2C bus, cause data loss and worse!
I will probe file /dev/i2c-0, address 0x51, mode byte
Continue? [Y/n]
0 1 2 3 4 5 6 7 8 9 a b c d e f 0123456789abcdef
00: ac ff 07 0c 0a 01 48 00 04 75 75 02 80 08 08 01 ?.????H.?uu?????
10: 0e 04 0c 01 02 26 00 a0 75 00 00 50 3c 50 30 20 ?????&.?u..P<P0
20: 00 00 50 50 00 00 00 00 00 41 4b 30 32 75 00 00 ..PP.....AK02u..
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1a ...............?
40: 80 00 00 00 00 00 00 bb ff 00 00 00 00 00 00 00 ?......?........
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
80: 80 00 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ?...............
90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
a0: 00 00 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
c0: 80 00 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ?...............
d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
e0: 00 00 ac ff ff ff ff ff ff ff ff ff ff ff ff ff ..?.............
f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
[root@ ~]# i2cdump 0 0x2f
No size specified (using byte-data access)
WARNING! This program can confuse your I2C bus, cause data loss and worse!
I will probe file /dev/i2c-0, address 0x2f, mode byte
Continue? [Y/n]
0 1 2 3 4 5 6 7 8 9 a b c d e f 0123456789abcdef
00: 2a 2a 00 00 00 00 00 00 00 00 00 00 00 00 00 00 **..............
10: 00 00 64 64 9f 00 00 5f 00 ff 00 00 25 00 7c 80 ..dd?.._....%.|?
20: be 43 ce c5 9d 4f d1 26 68 ff ff ff 00 ff 00 ff ?C???O?&h.......
30: 00 ff 00 ff 00 ff 00 ff 00 50 4b f0 f0 f0 d4 22 .........PK????"
40: 23 00 00 e3 7f ff ff bb 2f 13 73 c3 5f ff 80 5c #..??..?/?s?_.?\
50: ff ff ff ff ff ff ff ff 7a 30 ff bb bb c1 05 7f ........z0.?????
60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
80: 01 08 01 0f 3f 3c 3c 00 a8 a8 ff ff 3c 3c 0a 0a ?????<<.??..<<??
90: 19 00 00 01 09 ff 28 00 98 ff 3c 00 ff 01 01 ff ?..??.(.?.<..??.
a0: 01 01 01 28 0d 69 8f ff 3c c0 00 e0 ff ff 00 00 ???(?i?.<?.?....
b0: d0 c5 ff ff ff 00 ff 00 ff ff ff f0 f0 f0 12 ff ??.........????.
c0: f8 00 00 4b 00 50 00 ff 2a 00 00 4b 00 50 00 ff ?..K.P..*..K.P..
d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
e0: bd bd ac 46 50 5a 46 50 5a 32 3c 46 ff ff ff ff ???FPZFPZ2<F....
f0: ff ff 80 ff 00 01 00 51 ff 02 ff 00 00 00 00 ff ..?..?.Q.?......
[root@ ~]# i2cdump 0 0x50 c
WARNING! This program can confuse your I2C bus, cause data loss and worse!
I will probe file /dev/i2c-0, address 0x50, mode byte consecutive read
Continue? [Y/n]
0 1 2 3 4 5 6 7 8 9 a b c d e f 0123456789abcdef
00: ff ac 00 07 0c 0a 01 48 00 04 75 75 02 80 08 08 .?.????H.?uu????
10: 01 0e 04 0c 01 02 26 00 a0 75 00 00 50 3c 50 30 ??????&.?u..P<P0
20: 20 ac 00 50 50 00 00 00 00 00 41 4b 30 32 75 00 ?.PP.....AK02u.
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
40: 1a ac 00 00 00 00 00 00 bb ff 00 00 00 00 00 00 ??......?.......
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
60: 00 ac 00 00 00 00 00 00 00 00 00 00 00 00 00 00 .?..............
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
80: 00 ac 00 ff ff ff ff ff ff ff ff ff ff ff ff ff .?..............
90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
a0: ff ac 00 ff ff ff ff ff ff ff ff ff ff ff ff ff .?..............
b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
c0: ff ac 00 ff ff ff ff ff ff ff ff ff ff ff ff ff .?..............
d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
e0: ff ac 00 ac ff ff ff ff ff ff ff ff ff ff ff ff .?.?............
f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
[root@ ~]# modprobe eeprom
[root@ ~]# sensors
eeprom-i2c-0-51
Adapter: SMBus ALi 1563 Adapter @ 5000
Memory type: DDR SDRAM DIMM
Memory size (MB): 128
eeprom-i2c-0-50
Adapter: SMBus ALi 1563 Adapter @ 5000
Unknown EEPROM type (0)
Thanks
Best Regards
Chunhao
> -----Original Message-----
> From: Rudolf Marek [mailto:R.Marek at sh.cvut.cz]
> Sent: 2005?4?7? 15:28
> To: PI14 HUANG0
> Cc: R.Marek at sh.cvut.cz; sensors at Stimpy.netroedge.com; PI10 LHHsu; PI14 DZSHEN
> Subject: RE: We will port w83792d.c to linux-2.6
>
>
> Hello,
>
> Please can you repeat your tests? Debug messages are empty.
>
> I would prefer following without loading the eeprom driver and hwmon chip
> driver.
>
> i2cdump 0 0x50
> i2cdump 0 0x50 c
> i2cdump 0 0x51 c
> i2cdump 0 0x51
> i2cdump 0 0x2f
> i2cdump 0 0x50 c
>
> Thanks
>
> Regards
>
> Rudolf
>
>
>
> On Thu, 7 Apr 2005 Huang0 at Winbond.com.tw wrote:
>
> > Hi Rudolf
> >
> > I tried to add the mask, but only one of the DDR memory can be found,
> > The other one still can NOT be found! Please check the attached log messages
> > and the dump result below.
> > [root@ /usr/src/linux]# i2cdump 0 0x50 --> refer to attached message1
> > [root@ /usr/src/linux]# i2cdump 0 0x50 c --> refer to attached message2
> > [root@ /usr/src/linux]# i2cdump 0 0x50 --> refer to attached message3
> > [root@ /usr/src/linux]# modprobe eeprom
> > [root@ /usr/src/linux]# sensors --> refer to attached message4
> > [root@ /usr/src/linux]# modprobe w83792d
> > [root@ /usr/src/linux]# sensors --> refer to attached message5
> >
> >
> > Thanks
> > Best Regards
> > Chunhao
> >
> >
> > ++++++++++++++ detailed dump result +++++++++++++++++++++++++++++++
> > [root@ /usr/src/linux]# lsmod|grep i2c
> > i2c_dev 12800 0
> > i2c_ali1563 8452 0
> > i2c_core 25728 2 i2c_dev,i2c_ali1563
> > [root@ /usr/src/linux]# i2cdump 0 0x50 --> refer to attached message1
> > No size specified (using byte-data access)
> > WARNING! This program can confuse your I2C bus, cause data loss and worse!
> > I will probe file /dev/i2c-0, address 0x50, mode byte
> > Continue? [Y/n]
> > 0 1 2 3 4 5 6 7 8 9 a b c d e f 0123456789abcdef
> > 00: ac 00 07 0c 0a 01 48 00 04 75 75 02 80 08 08 01 ?.????H.?uu?????
> > 10: 0e 04 0c 01 02 26 00 a0 75 00 00 50 3c 50 30 20 ?????&.?u..P<P0
> > 20: ac 00 50 50 00 00 00 00 00 41 4b 30 32 75 00 00 ?.PP.....AK02u..
> > 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1a ...............?
> > 40: ac 00 00 00 00 00 00 bb ff 00 00 00 00 00 00 00 ?......?........
> > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
> > 60: ac 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ?...............
> > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
> > 80: ac 00 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ?...............
> > 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
> > a0: ac 00 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ?...............
> > b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
> > c0: ac 00 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ?...............
> > d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
> > e0: ac 00 ac ff ff ff ff ff ff ff ff ff ff ff ff ff ?.?.............
> > f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
> > [root@ /usr/src/linux]# i2cdump 0 0x50 c --> refer to attached message2
> > WARNING! This program can confuse your I2C bus, cause data loss and worse!
> > I will probe file /dev/i2c-0, address 0x50, mode byte consecutive read
> > Continue? [Y/n]
> > 0 1 2 3 4 5 6 7 8 9 a b c d e f 0123456789abcdef
> > 00: ff ac 00 07 0c 0a 01 48 00 04 75 75 02 80 08 08 .?.????H.?uu????
> > 10: 01 0e 04 0c 01 02 26 00 a0 75 00 00 50 3c 50 30 ??????&.?u..P<P0
> > 20: 20 ac 00 50 50 00 00 00 00 00 41 4b 30 32 75 00 ?.PP.....AK02u.
> > 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
> > 40: 1a ac 00 00 00 00 00 00 bb ff 00 00 00 00 00 00 ??......?.......
> > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
> > 60: 00 ac 00 00 00 00 00 00 00 00 00 00 00 00 00 00 .?..............
> > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
> > 80: 00 ac 00 ff ff ff ff ff ff ff ff ff ff ff ff ff .?..............
> > 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
> > a0: ff ac 00 ff ff ff ff ff ff ff ff ff ff ff ff ff .?..............
> > b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
> > c0: ff ac 00 ff ff ff ff ff ff ff ff ff ff ff ff ff .?..............
> > d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
> > e0: ff ac 00 ac ff ff ff ff ff ff ff ff ff ff ff ff .?.?............
> > f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
> > [root@ /usr/src/linux]# i2cdump 0 0x50 --> refer to attached message3
> > No size specified (using byte-data access)
> > WARNING! This program can confuse your I2C bus, cause data loss and worse!
> > I will probe file /dev/i2c-0, address 0x50, mode byte
> > Continue? [Y/n]
> > 0 1 2 3 4 5 6 7 8 9 a b c d e f 0123456789abcdef
> > 00: ac 00 07 0c 0a 01 48 00 04 75 75 02 80 08 08 01 ?.????H.?uu?????
> > 10: 0e 04 0c 01 02 26 00 a0 75 00 00 50 3c 50 30 20 ?????&.?u..P<P0
> > 20: ac 00 50 50 00 00 00 00 00 41 4b 30 32 75 00 00 ?.PP.....AK02u..
> > 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1a ...............?
> > 40: ac 00 00 00 00 00 00 bb ff 00 00 00 00 00 00 00 ?......?........
> > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
> > 60: ac 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ?...............
> > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
> > 80: ac 00 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ?...............
> > 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
> > a0: ac 00 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ?...............
> > b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
> > c0: ac 00 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ?...............
> > d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
> > e0: ac 00 ac ff ff ff ff ff ff ff ff ff ff ff ff ff ?.?.............
> > f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
> > [root@ /usr/src/linux]# modprobe eeprom
> > [root@ /usr/src/linux]# sensors --> refer to attached message4
> > eeprom-i2c-0-51
> > Adapter: SMBus ALi 1563 Adapter @ 5000
> > Memory type: DDR SDRAM DIMM
> > Memory size (MB): 128
> >
> > eeprom-i2c-0-50
> > Adapter: SMBus ALi 1563 Adapter @ 5000
> > Unknown EEPROM type (0)
> >
> > [root@ /usr/src/linux]# modprobe w83792d
> > [root@ /usr/src/linux]# sensors --> refer to attached message5
> > w83792d-i2c-0-2f
> > Adapter: SMBus ALi 1563 Adapter @ 5000
> > VCoreA: +1.53 V (min = +0.00 V, max = +1.78 V)
> > VCoreB: +0.54 V (min = +0.00 V, max = +1.78 V)
> > VIN0: +3.30 V (min = +0.00 V, max = +4.08 V)
> > VIN1: +3.17 V (min = +0.00 V, max = +4.08 V)
> > VIN2: +2.52 V (min = +0.00 V, max = +4.08 V)
> > VIN3: +1.26 V (min = +0.00 V, max = +4.08 V)
> > 5VCC: +5.03 V (min = +0.00 V, max = +6.12 V)
> > 5VSB: +4.99 V (min = +0.00 V, max = +6.12 V)
> > VBAT: +3.15 V (min = +0.00 V, max = +4.08 V)
> > Fan1: 1622 RPM (min = 703 RPM, div = 8)
> > Fan2: 0 RPM (min = 703 RPM, div = 8)
> > Fan3: 0 RPM (min = 703 RPM, div = 8)
> > Fan4: 0 RPM (min = 703 RPM, div = 8)
> > Fan5: 0 RPM (min = 703 RPM, div = 8)
> > Fan6: 0 RPM (min = 703 RPM, div = 8)
> > Fan7: 37500 RPM (min = 0 RPM, div = 2)
> > Temp1: +37.0????C (high = +80.0????C, hyst = +75.0????C) ALARM
> > Temp2: -8.0????C (high = +80.0????C, hyst = +75.0????C) ALARM
> > Temp3: +41.0????C (high = +80.0????C, hyst = +75.0????C) ALARM
> > chassis: Chassis is normal.
> >
> > eeprom-i2c-0-51
> > Adapter: SMBus ALi 1563 Adapter @ 5000
> > Memory type: DDR SDRAM DIMM
> > Memory size (MB): 128
> >
> > eeprom-i2c-0-50
> > Adapter: SMBus ALi 1563 Adapter @ 5000
> > Unknown EEPROM type (0)
> >
> >
> >
> > > -----Original Message-----
> > > From: Rudolf Marek [mailto:R.Marek at sh.cvut.cz]
> > > Sent: 2005???4???7??? 00:30
> > > To: PI14 HUANG0
> > > Cc: sensors at Stimpy.netroedge.com; PI10 LHHsu; PI14 DZSHEN
> > > Subject: RE: We will port w83792d.c to linux-2.6
> > >
> > > Hello all,
> > >
> > > How could this EVER worked????!!!!
> > >
> > > outb_p(inb_p(SMB_HST_CNTL2) | (size << 3), SMB_HST_CNTL2);
> > > MASK is missing !!!!
> > >
> > > Please can you add to your driver this?
> > >
> > > #define HST_CNTL2_SIZEMASK 0x38
> > >
> > > outb_p( (inb_p(SMB_HST_CNTL2)&~HST_CNTL2_SIZEMASK) | (size << 3),
> > > SMB_HST_CNTL2);
> > >
> > > I think then it should work.
> > >
> > > i2cdump 0 0x50
> > > i2cdump 0 0x50 c
> > > i2cdump 0 0x50
> > >
> > > and also
> > >
> > > modprobe eeprom
> > > sensors
> > >
> > >
> > > Regards
> > >
> > > Rudolf
> >
> ==========================================================================
> =================The privileged confidential information contained in this
> email is intended for use only by the addressees as indicated by the original
> author of this email. If you are not the addressee indicated in this email or
> are not responsible for delivery of the email to such person, please kindly
> reply the sender indicating accordingly and delete all copies of it from your
> computer and network server immediately. We thank you for your cooperation.
> It is advisable that any unauthorized use of confidential information of
> Winbond is strictly prohibited; and any information in this email that does
> not relate to the official business of Winbond shall be deemed as neither given
> nor endorsed by
> Winbond.==================================================================
> =========================If your computer is unable to decode Chinese font,
> please ignore the following message. They essentially repeat the English
> statement above.???H???????t?????q?l???]???????K?????T,
> ?????v???o?H?H???w?????H?H???\????.
> ?????z???D?Q???w?????H?H???]???????]?b???g???v?????????U???????
> H??, ???z?i?????o?H?H?????Y?N?H???q?q???P???????A???????H????.
> ?????z???X?@, ?????????P??. ?S??????,
> ???????g???v?????????????q?l?????K???T???????O?Q?Y???T????.
> ?H???P?????q?l???~?L???????e,???o?????????q?l?????????N??.
> >
-------------- next part --------------
A non-text attachment was scrubbed...
Name: debug_log.tar.gz
Type: application/x-gzip
Size: 148154 bytes
Desc: debug_log.tar.gz
Url : http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20050407/d38878e1/attachment.gz
