On Wed, 30 Mar 2005 20:16:40 +0200 Jean Delvare <khali at linux-fr.org> wrote: > Hi khaqq, > > Sorry for the delay. > > > I'm happy to report that my TUSL2-C is supported by > > lm-sensors (2.8.7). It uses the same formula as its older brother, > > the CUSL2. So maybe you would like to add it to sensors.conf on the > > same line : > > # Asus CUSL2, TUSL2-C, Asus CUV266-DLS > > The TUSL2 should work too, but I don't own one. > > Thanks a lot for the success report! We like them. > > Thanks for the configuration hint as well, I'll update the default > configuration file. After updating from linux 2.6.9 to 2.6.11 (new i2c ?) I have had to change the temp2 formulae again. The CUSL2 one was reporting temps near 60C (PIII/1200 with large cooler) while the BIOS said 40C. I think the correct formulae is *now* the same as the A7M266 but it's weird. Can you confirm something changed in the I2C code ? BTW, my father's P3B-F gets the CPU temp by reading the PII thermal diode, so I think this sentence : # "I guess, that the formula "temp2 (@*30/43)+25, (@-25)*43/30" is correct # for those Asus motherboards, which get CPU temperature from internal # thermal diode (Pentium Coppermine, and above), and "temp2 @*2.0, @/2.0" # is correct for Athlon/Duron boards, which use a thermistor in the # socket." should be changed to : # "I guess, that the formula "temp2 (@*30/43)+25, (@-25)*43/30" is correct # for those Asus motherboards, which get CPU temperature from internal # thermal diode (P3B-F, and above), and "temp2 @*2.0, @/2.0" # is correct for Athlon/Duron boards, which use a thermistor in the # socket." I'll try to use lm_sensors on the P3B-F as soon as I can (which may not be soon). I'll do more tests on the TUSL2-C then report to you again. Thanks Fran?ois
