Corey Minyard wrote: > Mark Studebaker wrote: > >> so the ipmi_smb driver Corey just posted to LKML, together with his >> previous i2c patches, >> together with http://bmcsensors-26.sourceforge.net , >> and you should be able to get sensor data from the 87431! >> let us know how it works! > > > Note that this was against 2.6.11-rc2 and you need the completion patch > posted by Mike Waychison at > http://marc.theaimsgroup.com/?l=linux-kernel&m=110669761400454&w=2 or > the completion_timeout routine is broken. I'm losing here, I've try to compile 2.6.7 however I can't load the IPMI_SI module. Error is as below. IPMI System Interface driver version v31, KCS version v31, SMIC version v31, BT version v31 ipmi_si: Unknown SMBIOS SI type. ipmi_si: Trying "kcs" at I/O port 0xca2 ipmi_si: Trying "smic" at I/O port 0xca9 ipmi_si: Trying "bt" at I/O port 0xe4 ipmi_si: Unknown SMBIOS SI type. ipmi_si: Unknown SMBIOS SI type. ipmi_si: Unknown SMBIOS SI type. ipmi_si: Unable to find any System Interface(s) with the patch + lm_sensors 2.8.7 & also 2.9.0 I've try to do a sensor-detect only the old config is being detected. (the one that giving 127 C)... WOO (Which is the wrong value) this is the lsmod that I'm loading Module Size Used by w83627hf 29956 0 eeprom 12168 0 i2c_sensor 7296 2 w83627hf,eeprom i2c_isa 6400 0 i2c_dev 14720 0 i2c_i801 12304 0 ipmi_devintf 12036 0 i2c_ipmi 8972 0 ipmi_msghandler 59876 2 ipmi_devintf,i2c_ipmi bmcsensors 40324 0 i2c_core 28032 8 w83627hf,eeprom,i2c_sensor,i2c_isa,i2c_dev,i2c_i801,i2c_ipmi,bmcsensors So I dont know where I'm now... http://marc.theaimsgroup.com/?l=linux-kernel&m=110669761400454&w=2 I'm not too sure where it fit. I'm on an SE7210TP1-E Mobo where the sensor chip is AD1207 & PC87431, if you need more information. Please help Regards, Chan Min Wai P.s is ipmi_smb really exists?
