Hi,
are there any known problems with the CPU Fan output and ASUS P4P800VM
motherboards? I don't get any output (0 RPM). MB Temp and CPU Temp is fine.
I'm using kernel 2.6.2 on Debian/sarge. The following kernel modules are
loaded: i2c-i801, i2c-isa, eeprom, w83627hf init=0. lmsensors.conf:
chip "w83627thf-*" "w83637hf-*"
label in0 "VCore"
label in1 "+12V"
label in2 "+3.3V"
label in3 "+5V"
label in4 "-12V"
label in7 "V5SB"
label in8 "VBat"
compute in1 ((28/10)+1)*@, @/((28/10)+1)
compute in3 ((34/51)+1)*@, @/((34/51)+1)
compute in4 (5.14*@)-14.91, (@+14.91)/5.14
compute in7 ((6.8/10)+1)*@ , @/((6.8/10)+1)
set in0_min vid * 0.95
set in0_max vid * 1.05
set in1_min 12 * 0.90
set in1_max 12 * 1.10
set in2_min 3.3 * 0.95
set in2_max 3.3 * 1.05
set in3_min 5.0 * 0.95
set in3_max 5.0 * 1.05
set in4_min -12 * 0.90
set in4_max -12 * 1.10
set in7_min 5 * 0.95
set in7_max 5 * 1.05
set in8_min 3.0 * 0.80
set in8_max 3.0 * 1.20
label temp1 "M/B Temp"
label temp2 "CPU Temp"
ignore temp3
# ignore fan1
label fan2 "CPU Fan"
# ignore fan3
Thanks,
Marcus
--
Marcus Schopen - schopen at medienlabor.de
Medienlabor. - Paulusstr.1 (im Victoria Geb?ude) - 33602 Bielefeld
tel. +49 521 9824771 - fax. +49 521 9824772 - mob. +49 171 6433903
InterNet, GNU/Linux, ZOPE, Netzwerke, Security, Consulting&Support
visit Deutsche Zope User Group - www.dzug.org
