ChangeSet 1.1938.445.11, 2004/12/21 11:09:49-08:00, jmunsin at iki.fi
[PATCH] I2C: it87.c update
- adds manual PWM
- removes buggy "reset" module parameter
- fixes some whitespaces
Signed-off-by: Jonas Munsin <jmunsin at iki.fi>
Signed-off-by: Greg Kroah-Hartman <greg at kroah.com>
drivers/i2c/chips/it87.c | 147 +++++++++++++++++++++++++++++++++++++++++------
1 files changed, 130 insertions(+), 17 deletions(-)
diff -Nru a/drivers/i2c/chips/it87.c b/drivers/i2c/chips/it87.c
--- a/drivers/i2c/chips/it87.c 2005-01-07 14:55:04 -08:00
+++ b/drivers/i2c/chips/it87.c 2005-01-07 14:55:04 -08:00
@@ -96,9 +96,6 @@
/* Update battery voltage after every reading if true */
static int update_vbat;
-/* Reset the registers on init if true */
-static int reset;
-
/* Chip Type */
static u16 chip_type;
@@ -128,6 +125,8 @@
#define IT87_REG_FAN(nr) (0x0d + (nr))
#define IT87_REG_FAN_MIN(nr) (0x10 + (nr))
#define IT87_REG_FAN_MAIN_CTRL 0x13
+#define IT87_REG_FAN_CTL 0x14
+#define IT87_REG_PWM(nr) (0x15 + (nr))
#define IT87_REG_VIN(nr) (0x20 + (nr))
#define IT87_REG_TEMP(nr) (0x29 + (nr))
@@ -164,6 +163,9 @@
#define ALARMS_FROM_REG(val) (val)
+#define PWM_TO_REG(val) ((val) >> 1)
+#define PWM_FROM_REG(val) (((val)&0x7f) << 1)
+
static int DIV_TO_REG(int val)
{
int answer = 0;
@@ -200,6 +202,8 @@
u8 vid; /* Register encoding, combined */
int vrm;
u32 alarms; /* Register encoding, combined */
+ u8 fan_main_ctrl; /* Register value */
+ u8 manual_pwm_ctl[3]; /* manual PWM value set by user */
};
@@ -440,18 +444,28 @@
{
struct it87_data *data = it87_update_device(dev);
return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan[nr],
- DIV_FROM_REG(data->fan_div[nr])) );
+ DIV_FROM_REG(data->fan_div[nr])));
}
static ssize_t show_fan_min(struct device *dev, char *buf, int nr)
{
struct it87_data *data = it87_update_device(dev);
return sprintf(buf,"%d\n",
- FAN_FROM_REG(data->fan_min[nr], DIV_FROM_REG(data->fan_div[nr])) );
+ FAN_FROM_REG(data->fan_min[nr], DIV_FROM_REG(data->fan_div[nr])));
}
static ssize_t show_fan_div(struct device *dev, char *buf, int nr)
{
struct it87_data *data = it87_update_device(dev);
- return sprintf(buf,"%d\n", DIV_FROM_REG(data->fan_div[nr]) );
+ return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr]));
+}
+static ssize_t show_pwm_enable(struct device *dev, char *buf, int nr)
+{
+ struct it87_data *data = it87_update_device(dev);
+ return sprintf(buf,"%d\n", (data->fan_main_ctrl & (1 << nr)) ? 1 : 0);
+}
+static ssize_t show_pwm(struct device *dev, char *buf, int nr)
+{
+ struct it87_data *data = it87_update_device(dev);
+ return sprintf(buf,"%d\n", data->manual_pwm_ctl[nr]);
}
static ssize_t set_fan_min(struct device *dev, const char *buf,
size_t count, int nr)
@@ -499,6 +513,44 @@
}
return count;
}
+static ssize_t set_pwm_enable(struct device *dev, const char *buf,
+ size_t count, int nr)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct it87_data *data = i2c_get_clientdata(client);
+ int val = simple_strtol(buf, NULL, 10);
+
+ if (val == 0) {
+ /* set on/off mode */
+ data->fan_main_ctrl &= ~(1 << nr);
+ it87_write_value(client, IT87_REG_FAN_MAIN_CTRL, data->fan_main_ctrl);
+ } else if (val == 1) {
+ /* set SmartGuardian mode */
+ data->fan_main_ctrl |= (1 << nr);
+ it87_write_value(client, IT87_REG_FAN_MAIN_CTRL, data->fan_main_ctrl);
+ /* set saved pwm value, clear FAN_CTLX PWM mode bit */
+ it87_write_value(client, IT87_REG_PWM(nr), PWM_TO_REG(data->manual_pwm_ctl[nr]));
+ } else
+ return -EINVAL;
+
+ return count;
+}
+static ssize_t set_pwm(struct device *dev, const char *buf,
+ size_t count, int nr)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct it87_data *data = i2c_get_clientdata(client);
+ int val = simple_strtol(buf, NULL, 10);
+
+ if (val < 0 || val > 255)
+ return -EINVAL;
+
+ data->manual_pwm_ctl[nr] = val;
+ if (data->fan_main_ctrl & (1 << nr))
+ it87_write_value(client, IT87_REG_PWM(nr), PWM_TO_REG(data->manual_pwm_ctl[nr]));
+
+ return count;
+}
#define show_fan_offset(offset) \
static ssize_t show_fan_##offset (struct device *dev, char *buf) \
@@ -533,6 +585,36 @@
show_fan_offset(2);
show_fan_offset(3);
+#define show_pwm_offset(offset) \
+static ssize_t show_pwm##offset##_enable (struct device *dev, \
+ char *buf) \
+{ \
+ return show_pwm_enable(dev, buf, offset - 1); \
+} \
+static ssize_t show_pwm##offset (struct device *dev, char *buf) \
+{ \
+ return show_pwm(dev, buf, offset - 1); \
+} \
+static ssize_t set_pwm##offset##_enable (struct device *dev, \
+ const char *buf, size_t count) \
+{ \
+ return set_pwm_enable(dev, buf, count, offset - 1); \
+} \
+static ssize_t set_pwm##offset (struct device *dev, \
+ const char *buf, size_t count) \
+{ \
+ return set_pwm(dev, buf, count, offset - 1); \
+} \
+static DEVICE_ATTR(pwm##offset##_enable, S_IRUGO | S_IWUSR, \
+ show_pwm##offset##_enable, \
+ set_pwm##offset##_enable); \
+static DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, \
+ show_pwm##offset , set_pwm##offset );
+
+show_pwm_offset(1);
+show_pwm_offset(2);
+show_pwm_offset(3);
+
/* Alarms */
static ssize_t show_alarms(struct device *dev, char *buf)
{
@@ -774,6 +856,12 @@
device_create_file(&new_client->dev, &dev_attr_fan2_div);
device_create_file(&new_client->dev, &dev_attr_fan3_div);
device_create_file(&new_client->dev, &dev_attr_alarms);
+ device_create_file(&new_client->dev, &dev_attr_pwm1_enable);
+ device_create_file(&new_client->dev, &dev_attr_pwm2_enable);
+ device_create_file(&new_client->dev, &dev_attr_pwm3_enable);
+ device_create_file(&new_client->dev, &dev_attr_pwm1);
+ device_create_file(&new_client->dev, &dev_attr_pwm2);
+ device_create_file(&new_client->dev, &dev_attr_pwm3);
if (data->type == it8712) {
device_create_file_vrm(new_client);
@@ -851,12 +939,17 @@
/* Called when we have found a new IT87. */
static void it87_init_client(struct i2c_client *client, struct it87_data *data)
{
- int tmp;
+ int tmp, i;
- if (reset) {
- /* Reset all except Watchdog values and last conversion values
- This sets fan-divs to 2, among others */
- it87_write_value(client, IT87_REG_CONFIG, 0x80);
+ /* initialize to sane defaults:
+ * - if the chip is in manual pwm mode, this will be overwritten with
+ * the actual settings on the chip (so in this case, initialization
+ * is not needed)
+ * - if in automatic or on/off mode, we could switch to manual mode,
+ * read the registers and set manual_pwm_ctl accordingly, but currently
+ * this is not implemented, so we initialize to something sane */
+ for (i = 0; i < 3; i++) {
+ data->manual_pwm_ctl[i] = 0xff;
}
/* Check if temperature channnels are reset manually or by some reason */
@@ -876,13 +969,35 @@
}
/* Check if tachometers are reset manually or by some reason */
- tmp = it87_read_value(client, IT87_REG_FAN_MAIN_CTRL);
- if ((tmp & 0x70) == 0) {
+ data->fan_main_ctrl = it87_read_value(client, IT87_REG_FAN_MAIN_CTRL);
+ if ((data->fan_main_ctrl & 0x70) == 0) {
/* Enable all fan tachometers */
- tmp = (tmp & 0x8f) | 0x70;
- it87_write_value(client, IT87_REG_FAN_MAIN_CTRL, tmp);
+ data->fan_main_ctrl |= 0x70;
+ it87_write_value(client, IT87_REG_FAN_MAIN_CTRL, data->fan_main_ctrl);
}
+ /* Set current fan mode registers and the default settings for the
+ * other mode registers */
+ for (i = 0; i < 3; i++) {
+ if (data->fan_main_ctrl & (1 << i)) {
+ /* pwm mode */
+ tmp = it87_read_value(client, IT87_REG_PWM(i));
+ if (tmp & 0x80) {
+ /* automatic pwm - not yet implemented, but
+ * leave the settings made by the BIOS alone
+ * until a change is requested via the sysfs
+ * interface */
+ } else {
+ /* manual pwm */
+ data->manual_pwm_ctl[i] = PWM_FROM_REG(tmp);
+ }
+ }
+ }
+
+ /* make sure the fan is on when in on/off mode */
+ tmp = it87_read_value(client, IT87_REG_FAN_CTL);
+ it87_write_value(client, IT87_REG_FAN_CTL, tmp | 0x07);
+
/* Start monitoring */
it87_write_value(client, IT87_REG_CONFIG,
(it87_read_value(client, IT87_REG_CONFIG) & 0x36)
@@ -984,8 +1099,6 @@
MODULE_DESCRIPTION("IT8705F, IT8712F, Sis950 driver");
module_param(update_vbat, bool, 0);
MODULE_PARM_DESC(update_vbat, "Update vbat if set else return powerup value");
-module_param(reset, bool, 0);
-MODULE_PARM_DESC(reset, "Reset the chip's registers, default no");
MODULE_LICENSE("GPL");
module_init(sm_it87_init);
