Hi, > Note that you don't really need i2c-viapro in this case (and it would > even cause trouble if you were running a 2.6 kernel). It was the proposal of sensors-detect some versions ago, so I inserted it. ;-) Kernel is still 2.4. > Could you try not to run it after a cold reboot, and see what the > initial value is? This will help us understand whether reading the value > or writing the value is the problem. I did a warm reboot (init 6; have no method of doing a cold reboot right now as this is a remote machine). myhost:~# sensors via686a-isa-0c00 Adapter: ISA adapter CPU core: +1.80 V (min = +0.06 V, max = +3.10 V) +2.5V: +1.10 V (min = +0.06 V, max = +3.10 V) I/O: +3.36 V (min = +0.08 V, max = +4.14 V) +5V: +5.23 V (min = +0.13 V, max = +6.44 V) +12V: +11.95 V (min = +0.32 V, max = +15.60 V) CPU Fan: 5818 RPM (min = 84375 RPM, div = 8) ALARM P/S Fan: 0 RPM (min = 1222 RPM, div = 8) SYS Temp: +27.2?C (high = +45?C, hyst = +40?C) CPU Temp: +21.6?C (high = +60?C, hyst = +55?C) SBr Temp: +22.3?C (high = +65?C, hyst = +60?C) myhost:~# sensors -s myhost:~# sensors via686a-isa-0c00 Adapter: ISA adapter CPU core: +1.80 V (min = +0.06 V, max = +3.10 V) +2.5V: +1.10 V (min = +2.37 V, max = +2.62 V) I/O: +3.36 V (min = +3.13 V, max = +3.45 V) +5V: +5.23 V (min = +4.51 V, max = +5.50 V) +12V: +11.95 V (min = +10.81 V, max = +13.20 V) CPU Fan: 5443 RPM (min = 84375 RPM, div = 8) ALARM P/S Fan: 0 RPM (min = 1222 RPM, div = 8) SYS Temp: +27.3?C (high = +45?C, hyst = +40?C) CPU Temp: +21.6?C (high = +60?C, hyst = +55?C) SBr Temp: +22.3?C (high = +65?C, hyst = +60?C) > You can still try but I doubt it'll help. There is no reason why a > working configuration file would suddenly stop working. A newly installed sensors.conf didn't help. > What you could do OTOH is manually delete the latest version of > libsensors (3.0.7) in /usr/local/lib, so that the previous one is used > instead (that would be 3.0.6 if you installed lm_sensors 2.8.8 before). > If the readings are back to normal, then it has to be a library bug. Here are the relevant files in my /usr/local/lib directory. /usr/local/lib/libsensors.a /usr/local/lib/libsensors.so -> libsensors.so.3 /usr/local/lib/libsensors.so.2 -> libsensors.so.2.0.1 /usr/local/lib/libsensors.so.2.0.1 /usr/local/lib/libsensors.so.3 -> libsensors.so.3.0.7 /usr/local/lib/libsensors.so.3.0.0 /usr/local/lib/libsensors.so.3.0.1 /usr/local/lib/libsensors.so.3.0.2 /usr/local/lib/libsensors.so.3.0.3 /usr/local/lib/libsensors.so.3.0.4 /usr/local/lib/libsensors.so.3.0.5 /usr/local/lib/libsensors.so.3.0.6 /usr/local/lib/libsensors.so.3.0.7 Shall I simply delete libsensors.so.3.0.7? Or do I have to change the libsensors.so.3 symlink as well? Thanks Florian
