Jean Delvare wrote: > Hi David, >> The readings from 'sensors' under the section w83697hf-isa-0290 >> show the following: >> -12V: +2.22 V (min = -13.16 V, max = -10.77 V) ALARM >> -5V: +0.60 V (min = -5.23 V, max = -4.73 V) ALARM >> I would hope this is incorrect! Is it possible to fix the values >> so they display correctly? All of the other output seems fine and >> correlates with either the ACPI thermal zone, BIOS readings, etc. > http://www2.lm-sensors.nu/~lm78/cvs/lm_sensors2/doc/lm_sensors-FAQ.html#Section-4_002e6 > Does the BIOS display values for -12V and -5V? If it does, what are > they? No, it does not, I hadn't noticed this. It does display values for Vdimm and Vio though which aren't in sensors. >> The chips on board are the SIS 961 and a Winbond W83697HF. > What motherboard is it exactly? An Epox 4SDM2+. Thanks for the FAQ reference, I've never had a new enough board that doesn't show the -12v and -5v lines until now. I've simply ignored the two sensors in the configuration file, for now. David
