doc/chips/it87 explains how to configure PWM. Troy Will wrote: > Novmember 28, 2004 > Hello, > I've been attempting to control the fan speed on a > Biostar iDEQ 210V computer which has an IT8705F Super > I/O chip. Does the it87 module ( which controls the > IT8705F chip ) enable pwm motor fan control? I have > read similar queries but haven't read any definitive > answers. > > The it87 documentaton says this: "The fan control > features can be enabled by setting bits 0-2 of the > fan_ctl register to 1." However, the documentation is > silent on how to set this these bits. Can these > register bits be set with isaset? Can they be set > somehow in the /etc/sensors.conf file? > > Similarly, the it87 documentation says this: "Bit 7 of > the pwm[1-3] registers enables/disables the chips > automatic temperature control mode for the specified > fan." But again, it has no mention on how to set or > read these registers. > > Any help would be apprecitated. By the way, I can read > the fan speed. Since I'm sure other people are trying > to do the same thing I will set up the following web > page if I come up with a solution: > biostar-linux.com/fancontrol.html > > > > > __________________________________ > Do you Yahoo!? > The all-new My Yahoo! - Get yours free! > http://my.yahoo.com > > >
