can you walk me through how to change those values? are we still
messing with the conf file?
Rob
On Sun, 2004-11-21 at 13:41, Jean Delvare wrote:
> > [root at Oneniisama rob]# strace sensors -s
> > execve("/usr/bin/sensors", ["sensors", "-s"], [/* 62 vars */]) = 0
> > (...)
>
> The output seems totally normal, so I don't understand what's going on.
> This would seem to accuse the chip driver more than the sensors program.
>
> Please try changing the values manually and see how it is going. For
> example, do:
>
> cat /sys/bus/i2c/devices/1-002d/fan_div1
> echo 4 > /sys/bus/i2c/devices/1-002d/fan_div1
> (wait 3 seconds)
> cat /sys/bus/i2c/devices/1-002d/fan_div1
>
> If it doesn't return 4 then the chip driver is faulty, or, more likely,
> the chip itself. Could be that the chip is locked in read-only mode. We
> do not have a datasheet for the ASB100 so it's hard to tell.
