On Fri, Nov 05, 2004 at 01:48:41PM -0800, Greg KH wrote:
> On Mon, Oct 25, 2004 at 03:05:26PM -0700, Justin Thiessen wrote:
> > On Mon, Oct 25, 2004 at 10:59:59PM +0200, Jean Delvare wrote:
> > > > > Hm, there are a number of rejects in this patch. Care to resync up
> > > > > with the next kernel release and resend this?
> > > >
> > > > Ok, try this:
> > > >
> > > > signed off by: Justin Thiessen <jthiessen at penguincomputing.com>
> > > >
> > > > patch for kernel 2.6.X lm85 driver follows:
<snip>
> Applied, thanks.
>
> But now I get the following build warnings:
>
> drivers/i2c/chips/lm85.c:220: warning: 'SMOOTH_TO_REG' defined but not used
> drivers/i2c/chips/lm85.c:236: warning: 'SPINUP_TO_REG' defined but not used
>
> Care to send me a patch to fix them up?
Ok.
Justin Thiessen
Signed off by Justin Thiessen <jthiessen at penguincomputing.com>
-------
--- linux-2.6.10-rc1/drivers/i2c/chips/lm85.c.orig 2004-11-04 20:30:08.340770952 -0800
+++ linux-2.6.10-rc1/drivers/i2c/chips/lm85.c 2004-11-04 20:25:25.354791360 -0800
@@ -212,38 +212,6 @@ static int RANGE_TO_REG( int range )
* MSB (bit 3, value 8). If the enable bit is 0, the encoded value
* is ignored, or set to 0.
*/
-static int lm85_smooth_map[] = { /* .1 sec */
- 350, 176, 118, 70, 44, 30, 16, 8
-/* 35.4 * 1/1, 1/2, 1/3, 1/5, 1/8, 1/12, 1/24, 1/48 */
- };
-static int SMOOTH_TO_REG( int smooth )
-{
- int i;
-
- if( smooth <= 0 ) { return 0 ; } /* Disabled */
- for( i = 0 ; i < 7 ; ++i )
- if( smooth >= lm85_smooth_map[i] )
- break ;
- return( (i & 0x07) | 0x08 );
-}
-#define SMOOTH_FROM_REG(val) ((val)&0x08?lm85_smooth_map[(val)&0x07]:0)
-
-/* These are the fan spinup delay time encodings */
-static int lm85_spinup_map[] = { /* .1 sec */
- 0, 1, 2, 4, 7, 10, 20, 40
- };
-static int SPINUP_TO_REG( int spinup )
-{
- int i;
-
- if( spinup >= lm85_spinup_map[7] ) { return 7 ; }
- for( i = 0 ; i < 7 ; ++i )
- if( spinup <= lm85_spinup_map[i] )
- break ;
- return( i & 0x07 );
-}
-#define SPINUP_FROM_REG(val) (lm85_spinup_map[(val)&0x07])
-
/* These are the PWM frequency encodings */
static int lm85_freq_map[] = { /* .1 Hz */
100, 150, 230, 300, 380, 470, 620, 940
