Actually, the data "appears" to be read correctly but temp2 is not
correct. Also an ALARM where there should be none (in3). A result of
forcing?
<SHELL>
<defiant> [2004-09-11 at 20:00:17] /etc -> sensors -s
<defiant> [2004-09-11 at 20:01:45] /etc -> sensors
w83781d-isa-0290
Adapter: ISA adapter
in0: +2.00 V (min = +1.94 V, max = +2.14 V)
in1: +2.00 V (min = +1.94 V, max = +2.14 V)
in2: +3.57 V (min = +2.96 V, max = +3.63 V)
in3: +4.87 V (min = +4.73 V, max = +5.24 V) ALARM
in4: +12.16 V (min = +11.37 V, max = +12.59 V)
in5: -11.96 V (min = -12.57 V, max = -11.35 V)
in6: -4.86 V (min = -5.25 V, max = -4.74 V)
fan2: 3688 RPM (min = 3245 RPM, div = 2)
temp1: +29 C (high = +35 C, hyst = +30 C)
temp2: -128.0 C (high = +0 C, hyst = +0 C)
vid: +2.050 V
alarms:
beep_enable:
Sound alarm disabled
</SHELL>
