Hello, Ovis came with Intel D915GEV desktop board (very new board) here on the picture: http://www.intel.com/design/motherbd/ev/pix/D915GEV_lg.jpg 00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB PCI Bridge (rev d3) 00:1f.0 ISA bridge: Intel Corp.: Unknown device 2640 (rev 03) 00:1f.1 IDE interface: Intel Corp.: Unknown device 266f (rev 03) 00:1f.3 SMBus: Intel Corp.: Unknown device 266a (rev 03) sensors-detect returned no sensors. Its because the bus has troubles Sep 2 22:03:32 shi kernel: i801 smbus 0000:00:1f.3: Error: no response! Detected devices: 21:02 < ovis> 0 1 2 3 4 5 6 7 8 9 a b c d e f 21:02 < ovis> 00: XX XX XX XX XX 08 XX XX XX XX XX XX XX 21:02 < ovis> 10: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX 21:03 < ovis> 20: XX XX XX XX XX XX XX XX XX XX XX XX XX XX 2e XX 21:03 < ovis> 30: 30 XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX 21:03 < ovis> 40: XX XX XX XX 44 XX XX XX XX XX XX XX XX XX XX XX 21:03 < ovis> 50: 50 XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX 21:03 < ovis> 60: XX 61 XX XX XX XX XX XX XX 69 XX XX XX XX XX XX 21:03 < ovis> 70: XX XX XX XX XX XX XX XX the 0x2e is ADM1027 according to picture so we tried to load only i2c-i801 lm85 (after clean boot) with force=0,0x2e But he still gets Sep 2 21:46:31 shi kernel: i2c_adapter i2c-0: registered as adapter #0 Sep 2 21:47:21 shi kernel: i2c-core: driver lm85 registered. Sep 2 21:47:21 shi kernel: i2c_adapter i2c-0: found normal i2c entry for adapte r 0, addr 2c<7>i801 smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=0b,ADD=58 , DAT0=00, DAT1=00 Sep 2 21:47:21 shi kernel: i801 smbus 0000:00:1f.3: Error: no response! Sep 2 21:47:21 shi kernel: i801 smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=0b, ADD=58, DAT0=00, DAT1=00 Sep 2 21:47:21 shi kernel: i2c_adapter i2c-0: found normal i2c entry for adapte r 0, addr 2d<7>i801 smbus 0000:00:1f.3: Transaction (pre): CNT=00, 5ACMD=0b,ADD=5a , DAT0=00, DAT1=00 Sep 2 21:47:21 shi kernel: i801 smbus 0000:00:1f.3: Error: no response! Sep 2 21:47:21 shi kernel: i801 smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=0b, ADD=5a, DAT0=00, DAT1=00 Sep 2 21:47:21 shi kernel: i2c_adapter i2c-0: found normal i2c entry for adapte r 0, addr 2e<7>i801 smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=0b,ADD=5c , DAT0=00, DAT1=00 Sep 2 21:47:21 shi kernel: i801 smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=0b, ADD=5c, DAT0=00, DAT1=00 Sep 2 21:47:21 shi kernel: i801 smbus 0000:00:1f.3: Transaction (pre): CNT=08, CMD=3e,ADD=5d, DAT0=00, DAT1=00 Sep 2 21:47:21 shi kernel: i801 smbus 0000:00:1f.3: Transaction (post): CNT=08, CMD=3e, ADD=5d, DAT0=5c, DAT1=00 Sep 2 21:47:21 shi kernel: i801 smbus 0000:00:1f.3: Transaction (pre): CNT=08, CMD=3f,ADD=5d, DAT0=5c, DAT1=00 Sep 2 21:47:21 shi kernel: i801 smbus 0000:00:1f.3: Transaction (post): CNT=08, CMD=3f, ADD=5d, DAT0=68, DAT1=00 Sep 2 21:47:21 shi kernel: i2c_adapter i2c-0: Detecting device at 0,0x2e with C OMPANY: 0x5c and VERSTEP: 0x68 Sep 2 21:47:21 shi kernel: i2c_adapter i2c-0: Autodetecting device at 0,0x2e ..
