1) We have: i2c - 2.8.0, lm_sensors - 2.8.0 (RPM's from SuSE Linux
9.0
for Opteron);
kernel: 2.4.21-102-smp (x86_64)
Motherboard: Tyan S2880; /etc/sensors.conf from Tyan
Website
i2c-amd756 module was wrong in both binary and source RPM's; modprobe
for it says "init_module: no such device".
All other components, including w83781d module w/w83627hf chip
works normally and gives the corresponding sensors results. We want
to use lm_sensors for fan's speeds and temperatures only.
2) I added the string w/pci_device_id to i2c-amd756.c according
ticket# 1481 (and patch final strings starting on line 400
according Daniel Rune Jensen letter form 11 Dec 2003). Now all the
modules was loaded successfully:
i2c-core
i2c-dev
i2c-proc
i2c-isa
i2c-amd8111
i2c-amd756
lm85
lm75
w83781d
eeprom
sensors-detect works normally. But sensors -s says
"adm1027-i2c-1-2d can't read or write". It looks something like
Ticket#1682 (partially).
But issuing of sensors command gives me reasonable results,
in particular for adm1027 chip (attached below).
Sorry, how I may correct the situation w/sensors -s ?
(I prefer not to going to more recent i2c/lm_sensors releases because
it's necessary to patch 64-bit SuSE kernel :-().
Yours
Mikhail Kuzminsky
Zelinsky Institute of Organic Chemistry
Moscow
results of sensors run are:
adm1027-i2c-1-2d
Adapter: SMBus AMD75x adapter at 50e0
Algorithm: Non-I2C SMBus adapter
VDD 2.5V: +2.484 V (min = +0.00 V, max = +3.32 V)
DDR VTT: +1.251 V (min = +0.00 V, max = +2.99 V)
3VSB: +3.227 V (min = +0.00 V, max = +4.38 V)
+5 V: +5.150 V (min = +0.00 V, max = +6.64 V)
+12V: +12.234 V (min = +0.00 V, max = +15.94 V)
chs1 fan: 0 RPM (min = 0 RPM)
chs2 fan: 0 RPM (min = 0 RPM)
chs3 fan: 0 RPM (min = 0 RPM)
CPU2 Temp:+45.25?C (min = -128?C, max = +127?C)
CPU1 Temp:+44.75?C (min = -127?C, max = +127?C)
lm75-i2c-1-49
Adapter: SMBus AMD75x adapter at 50e0
Algorithm: Non-I2C SMBus adapter
temp: +27.5?C (limit = +52.0?C, hysteresis = +47.0?C)
lm75-i2c-1-4a
Adapter: SMBus AMD75x adapter at 50e0
Algorithm: Non-I2C SMBus adapter
temp: +29.5?C (limit = +52.0?C, hysteresis = +47.0?C)
eeprom-i2c-1-52
Adapter: SMBus AMD75x adapter at 50e0
Algorithm: Non-I2C SMBus adapter
Machine name:
Serial number:
eeprom-i2c-1-53
Adapter: SMBus AMD75x adapter at 50e0
Algorithm: Non-I2C SMBus adapter
Memory type: DDR SDRAM DIMM SPD
Memory size (MB): 512
eeprom-i2c-1-54
Adapter: SMBus AMD75x adapter at 50e0
Algorithm: Non-I2C SMBus adapter
Memory type: DDR SDRAM DIMM SPD
Memory size (MB): 512
eeprom-i2c-1-55
Adapter: SMBus AMD75x adapter at 50e0
Algorithm: Non-I2C SMBus adapter
Memory type: DDR SDRAM DIMM SPD
Memory size (MB): 512
w83627hf-isa-0290
Adapter: ISA adapter
Algorithm: ISA algorithm
VCore 2: +1.52 V (min = +1.42 V, max = +1.56 V)
VCore 1: +1.55 V (min = +1.42 V, max = +1.56 V) ALARM
+3.3V: +3.36 V (min = +3.13 V, max = +3.45 V)
DDR term: +1.21 V (min = +1.08 V, max = +1.32 V)
+2.5V: +2.46 V (min = +2.75 V, max = +2.25 V)
CPU H.T.: +1.20 V (min = +1.26 V, max = +1.13 V)
CPU2 Fan: 3276 RPM (min = 3000 RPM, div = 2)
CPU1 Fan: 3260 RPM (min = 3000 RPM, div = 2)
chs4 Fan: 0 RPM (min = 3000 RPM, div = 2)
VRM1 temp: +31?C (limit = +40?C, hysteresis = +37?C) sensor =
3904 transistor
VRM2 temp: +29.5?C (limit = +52?C, hysteresis = +47?C) sensor =
3904 transistor
VRM3 temp: +32.0?C (limit = +52?C, hysteresis = +47?C) sensor =
3904 transistor
alarms: Chassis intrusion detection ALARM
beep_enable:
Sound alarm disabled
