Hello.
I have installed lm_sensors 2.8.7 from an rpm package (for mandrake 10.0) and
have problems with configuration.
My motherboard is VIA VT8233A (though instruction for my M/B says it's V266B).
And when first probing it finds i2c-viapro for this bus but later on finds
nothing on SMBus Via Pro adapter (only eeprom), on ISA bus it finds Winbond
W83697HF (w83781d driver) and on Super I/0 it finds Winbond W83697HF Super IO
Sensors.
Here's the summary :
Driver `eeprom' (should be inserted):
Detects correctly:
* Bus `SMBus Via Pro adapter at 5000' (Algorithm unavailable)
Busdriver `i2c-viapro', I2C address 0x50
Chip `SPD EEPROM' (confidence: 8)
Driver `w83781d' (may not be inserted):
Misdetects:
* ISA bus address 0x0290 (Busdriver `i2c-isa')
Chip `Winbond W83697HF' (confidence: 8)
Driver `w83627hf' (should be inserted):
Detects correctly:
* ISA bus address 0x0290 (Busdriver `i2c-isa')
Chip `Winbond W83697HF Super IO Sensors' (confidence: 9)
My problem is that it tells me to $modprobe w83627hf which outputs :
FATAL: Module w83627hf not found.
And when I try to $modprobe w83781d module is loaded successfuly but
$sensors -s
outputs :
w83697hf-isa-0290: Can't access procfs/sysfs file for writing;
Run as root?
though I'm a root...
What's going on?
--
Cezary Morga <cezarym at pf.pl>
GG# 169903 ICQ# 328-700-565
Jabber: thereidos at jabber.aster.pl
thereidos at jabberpl.org
