> > Hi Rudolf, after loading this module, I now can see voltage and temp. > statistics, thanks for your support. But now I can see a somewhat strange > entry: > > SYS Temp: +51.3 C (high = +83 C, hyst = +82 C) > CPU Temp: +39.8 C (high = +146 C, hyst = -71 C) I think just labels are swapped. Please edit /etc/sensors.conf file. 1) find your chip (its name is in sensors output) 2) label tempX "Temp2/CPU" just switch labels or labels definitions(swap temp1 with temp2) 2.5) adjust other options as limits etc 3) run sensors -s to apply changes (needs to be pernement) 4) check if it works :) > > PS: I have one entry with "ALARM". What must happen, that such an "ALARM" > gets displayed? Not to fit in limits I think after sensors -s they will be programmed. I hope this helps regards Rudolf
