[PATCH 2.6] ADM1030 and Co sensors chips support for 2.6.7-mm1 kernel

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Greg,

Here is a patch against linux-2.6.7-mm1 kernel that adds support for adm1030 and adm1031 sensors chips.

It has been reviewed several times by Jean Delvare, and he thinks it is ready for inclusion into 2.6 kernel. So here it is.


Thanks,

Alexandre.


Signed-off-by: Alexandre d'Alton <alex at alexdalton.org>

diff -urN linux-2.6.7-mm1-orig/drivers/i2c/chips/Kconfig linux-2.6.7-mm1/drivers/i2c/chips/Kconfig
--- linux-2.6.7-mm1-orig/drivers/i2c/chips/Kconfig	2004-06-22 18:56:39.000000000 +0200
+++ linux-2.6.7-mm1/drivers/i2c/chips/Kconfig	2004-06-22 19:00:49.000000000 +0200
@@ -22,6 +22,16 @@
 	  This driver can also be built as a module.  If so, the module
 	  will be called adm1021.
 
+config SENSORS_ADM1031
+	tristate "Analog Devices ADM1031 and compatibles"
+	depends on I2C && EXPERIMENTAL
+	select I2C_SENSOR
+	help
+	  If you say yes here you get support for Analog Devices ADM1031 
+	  and ADM1030 sensor chips.
+	  This driver can also be built as a module.  If so, the module
+	  will be called adm1031.
+
 config SENSORS_ASB100
 	tristate "Asus ASB100 Bach"
 	depends on I2C && EXPERIMENTAL
diff -urN linux-2.6.7-mm1-orig/drivers/i2c/chips/Makefile linux-2.6.7-mm1/drivers/i2c/chips/Makefile
--- linux-2.6.7-mm1-orig/drivers/i2c/chips/Makefile	2004-06-22 18:56:39.000000000 +0200
+++ linux-2.6.7-mm1/drivers/i2c/chips/Makefile	2004-06-22 19:00:46.000000000 +0200
@@ -8,6 +8,7 @@
 obj-$(CONFIG_SENSORS_W83781D)	+= w83781d.o
 
 obj-$(CONFIG_SENSORS_ADM1021)	+= adm1021.o
+obj-$(CONFIG_SENSORS_ADM1031)	+= adm1031.o
 obj-$(CONFIG_SENSORS_DS1621)	+= ds1621.o
 obj-$(CONFIG_SENSORS_EEPROM)	+= eeprom.o
 obj-$(CONFIG_SENSORS_FSCHER)	+= fscher.o
diff -urN linux-2.6.7-mm1-orig/drivers/i2c/chips/adm1031.c linux-2.6.7-mm1/drivers/i2c/chips/adm1031.c
--- linux-2.6.7-mm1-orig/drivers/i2c/chips/adm1031.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.7-mm1/drivers/i2c/chips/adm1031.c	2004-06-22 19:45:56.000000000 +0200
@@ -0,0 +1,988 @@
+/*
+  adm1031.c - Part of lm_sensors, Linux kernel modules for hardware
+  monitoring
+  Based on lm75.c and lm85.c
+  Supports adm1030 / adm1031
+  Copyright (C) 2004 Alexandre d'Alton <alex at alexdalton.org>
+  Reworked by Jean Delvare <khali at linux-fr.org>
+  
+  This program is free software; you can redistribute it and/or modify
+  it under the terms of the GNU General Public License as published by
+  the Free Software Foundation; either version 2 of the License, or
+  (at your option) any later version.
+
+  This program is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  GNU General Public License for more details.
+
+  You should have received a copy of the GNU General Public License
+  along with this program; if not, write to the Free Software
+  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+
+/* Following macros takes channel parameter starting from 0 to 2 */
+#define ADM1031_REG_FAN_SPEED(nr)	(0x08 + (nr))
+#define ADM1031_REG_FAN_DIV(nr)		(0x20  + (nr))
+#define ADM1031_REG_PWM			(0x22)
+#define ADM1031_REG_FAN_MIN(nr)		(0x10 + (nr))
+
+#define ADM1031_REG_TEMP_MAX(nr)	(0x14  + 4*(nr))
+#define ADM1031_REG_TEMP_MIN(nr)	(0x15  + 4*(nr))
+#define ADM1031_REG_TEMP_CRIT(nr)	(0x16  + 4*(nr))
+
+#define ADM1031_REG_TEMP(nr)		(0xa + (nr))
+#define ADM1031_REG_AUTO_TEMP(nr)	(0x24 + (nr))
+
+#define ADM1031_REG_STATUS(nr)		(0x2 + (nr))
+
+#define ADM1031_REG_CONF1		0x0
+#define ADM1031_REG_CONF2		0x1
+#define ADM1031_REG_EXT_TEMP		0x6
+
+#define ADM1031_CONF1_MONITOR_ENABLE	0x01	/* Monitoring enable */
+#define ADM1031_CONF1_PWM_INVERT	0x08	/* PWM Invert */
+#define ADM1031_CONF1_AUTO_MODE		0x80	/* Auto FAN */
+
+#define ADM1031_CONF2_PWM1_ENABLE	0x01
+#define ADM1031_CONF2_PWM2_ENABLE	0x02
+#define ADM1031_CONF2_TACH1_ENABLE	0x04
+#define ADM1031_CONF2_TACH2_ENABLE	0x08
+#define ADM1031_CONF2_TEMP_ENABLE(chan)	(0x10 << (chan))
+
+/* Addresses to scan */
+static unsigned short normal_i2c[] = { I2C_CLIENT_END };
+static unsigned short normal_i2c_range[] = { 0x2c, 0x2e, I2C_CLIENT_END };
+static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
+static unsigned int normal_isa_range[] = { I2C_CLIENT_ISA_END };
+
+/* Insmod parameters */
+SENSORS_INSMOD_2(adm1030, adm1031);
+
+typedef u8 auto_chan_table_t[8][2];
+
+/* Each client has this additional data */
+struct adm1031_data {
+	struct i2c_client client;
+	struct semaphore update_lock;
+	int chip_type;
+	char valid;		/* !=0 if following fields are valid */
+	unsigned long last_updated;	/* In jiffies */
+	/* The chan_select_table contains the possible configurations for
+	 * auto fan control.
+	 */
+	auto_chan_table_t *chan_select_table;
+	u16 alarm;
+	u8 conf1;
+	u8 conf2;
+	u8 fan[2];
+	u8 fan_div[2];
+	u8 fan_min[2];
+	u8 pwm[2];
+	u8 old_pwm[2];
+	s8 temp[3];
+	u8 ext_temp[3];
+	u8 auto_temp[3];
+	u8 auto_temp_min[3];
+	u8 auto_temp_off[3];
+	u8 auto_temp_max[3];
+	s8 temp_min[3];
+	s8 temp_max[3];
+	s8 temp_crit[3];
+};
+
+static int adm1031_attach_adapter(struct i2c_adapter *adapter);
+static int adm1031_detect(struct i2c_adapter *adapter, int address, int kind);
+static void adm1031_init_client(struct i2c_client *client);
+static int adm1031_detach_client(struct i2c_client *client);
+static inline u8 adm1031_read_value(struct i2c_client *client, u8 reg);
+static inline int
+adm1031_write_value(struct i2c_client *client, u8 reg, unsigned int value);
+
+static struct adm1031_data *adm1031_update_device(struct device *dev);
+
+/* This is the driver that will be inserted */
+static struct i2c_driver adm1031_driver = {
+	.owner = THIS_MODULE,
+	.name = "adm1031",
+	.flags = I2C_DF_NOTIFY,
+	.attach_adapter = adm1031_attach_adapter,
+	.detach_client = adm1031_detach_client,
+};
+
+static int adm1031_id = 0;
+
+#define TEMP_TO_REG(val)		(((val) < 0 ? ((val - 500) / 1000) : \
+					((val + 500) / 1000)))
+
+#define TEMP_FROM_REG(val)		((val) * 1000)
+
+#define TEMP_FROM_REG_EXT(val, ext)	(TEMP_FROM_REG(val) + (ext) * 125)
+
+#define FAN_FROM_REG(reg, div)		((reg) ? (11250 * 60) / ((reg) * (div)) : 0)
+
+static int FAN_TO_REG(int reg, int div)
+{
+	int tmp;
+	tmp = FAN_FROM_REG(SENSORS_LIMIT(reg, 0, 65535), div);
+	return tmp > 255 ? 255 : tmp;
+}
+
+#define FAN_DIV_FROM_REG(reg)		(1<<(((reg)&0xc0)>>6))
+
+#define PWM_TO_REG(val)			(SENSORS_LIMIT((val), 0, 255) >> 4)
+#define PWM_FROM_REG(val)		((val) << 4)
+
+#define FAN_CHAN_FROM_REG(reg)		(((reg) >> 5) & 7)
+#define FAN_CHAN_TO_REG(val, reg)	\
+	(((reg) & 0x1F) | (((val) << 5) & 0xe0))
+
+#define AUTO_TEMP_MIN_TO_REG(val, reg)	\
+	((((val)/500) & 0xf8)|((reg) & 0x7))
+#define AUTO_TEMP_RANGE_FROM_REG(reg)	(5000 * (1<< ((reg)&0x7)))
+#define AUTO_TEMP_MIN_FROM_REG(reg)	(1000 * ((((reg) >> 3) & 0x1f) << 2))
+
+#define AUTO_TEMP_MIN_FROM_REG_DEG(reg)	((((reg) >> 3) & 0x1f) << 2)
+
+#define AUTO_TEMP_OFF_FROM_REG(reg)		\
+	(AUTO_TEMP_MIN_FROM_REG(reg) - 5000)
+
+#define AUTO_TEMP_MAX_FROM_REG(reg)		\
+	AUTO_TEMP_RANGE_FROM_REG(reg) +		\
+	AUTO_TEMP_MIN_FROM_REG(reg)
+
+static int AUTO_TEMP_MAX_TO_REG(int val, int reg, int pwm)
+{
+	int ret;
+	int range = val - AUTO_TEMP_MIN_FROM_REG(reg);
+
+	range = ((val - AUTO_TEMP_MIN_FROM_REG(reg))*10)/(16 - pwm);
+	ret = ((reg & 0xf8) |
+	       (range < 10000 ? 0 :
+		range < 20000 ? 1 :
+		range < 40000 ? 2 : range < 80000 ? 3 : 4));
+	return ret;
+}
+
+/* FAN auto control */
+#define GET_FAN_AUTO_BITFIELD(data, idx)	\
+	(*(data)->chan_select_table)[FAN_CHAN_FROM_REG((data)->conf1)][idx%2]
+
+/* The tables below contains the possible values for the auto fan 
+ * control bitfields. the index in the table is the register value.
+ * MSb is the auto fan control enable bit, so the four first entries
+ * in the table disables auto fan control when both bitfields are zero.
+ */
+static auto_chan_table_t auto_channel_select_table_adm1031 = {
+	{0, 0}, {0, 0}, {0, 0}, {0, 0},
+	{2 /*0b010 */ , 4 /*0b100 */ },
+	{2 /*0b010 */ , 2 /*0b010 */ },
+	{4 /*0b100 */ , 4 /*0b100 */ },
+	{7 /*0b111 */ , 7 /*0b111 */ },
+};
+
+static auto_chan_table_t auto_channel_select_table_adm1030 = {
+	{0, 0}, {0, 0}, {0, 0}, {0, 0},
+	{2 /*0b10 */		, 0},
+	{0xff /*invalid */	, 0},
+	{0xff /*invalid */	, 0},
+	{3 /*0b11 */		, 0},
+};
+
+/* That function checks if a bitfield is valid and returns the other bitfield
+ * nearest match if no exact match where found.
+ */
+static int
+get_fan_auto_nearest(struct adm1031_data *data,
+		     int chan, u8 val, u8 reg, u8 * new_reg)
+{
+	int i;
+	int first_match = -1, exact_match = -1;
+	u8 other_reg_val =
+	    (*data->chan_select_table)[FAN_CHAN_FROM_REG(reg)][chan ? 0 : 1];
+
+	if (val == 0) {
+		*new_reg = 0;
+		return 0;
+	}
+
+	for (i = 0; i < 8; i++) {
+		if ((val == (*data->chan_select_table)[i][chan]) &&
+		    ((*data->chan_select_table)[i][chan ? 0 : 1] ==
+		     other_reg_val)) {
+			/* We found an exact match */
+			exact_match = i;
+			break;
+		} else if (val == (*data->chan_select_table)[i][chan] &&
+			   first_match == -1) {
+			/* Save the first match in case of an exact match has not been
+			 * found 
+			 */
+			first_match = i;
+		}
+	}
+
+	if (exact_match >= 0) {
+		*new_reg = exact_match;
+	} else if (first_match >= 0) {
+		*new_reg = first_match;
+	} else {
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static ssize_t show_fan_auto_channel(struct device *dev, char *buf, int nr)
+{
+	struct adm1031_data *data = adm1031_update_device(dev);
+	return sprintf(buf, "%d\n", GET_FAN_AUTO_BITFIELD(data, nr));
+}
+
+static ssize_t
+set_fan_auto_channel(struct device *dev, const char *buf, size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1031_data *data = i2c_get_clientdata(client);
+	int val;
+	u8 reg;
+	int ret;
+	u8 old_fan_mode;
+
+	old_fan_mode = data->conf1;
+
+	down(&data->update_lock);
+	val = simple_strtol(buf, NULL, 10);
+	
+	if ((ret = get_fan_auto_nearest(data, nr, val, data->conf1, &reg))) {
+		up(&data->update_lock);
+		return ret;
+	}
+	if (((data->conf1 = FAN_CHAN_TO_REG(reg, data->conf1)) & ADM1031_CONF1_AUTO_MODE) ^ 
+	    (old_fan_mode & ADM1031_CONF1_AUTO_MODE)) {
+		if (data->conf1 & ADM1031_CONF1_AUTO_MODE){
+			/* Switch to Auto Fan Mode 
+			 * Save PWM registers 
+			 * Set PWM registers to 33% Both */
+			data->old_pwm[0] = data->pwm[0];
+			data->old_pwm[1] = data->pwm[1];
+			adm1031_write_value(client, ADM1031_REG_PWM, 0x55);
+		} else {
+			/* Switch to Manual Mode */
+			data->pwm[0] = data->old_pwm[0];
+			data->pwm[1] = data->old_pwm[1];
+			/* Restore PWM registers */
+			adm1031_write_value(client, ADM1031_REG_PWM, 
+					    data->pwm[0] | (data->pwm[1] << 4));
+		}
+	}
+	data->conf1 = FAN_CHAN_TO_REG(reg, data->conf1);
+	adm1031_write_value(client, ADM1031_REG_CONF1, data->conf1);
+	up(&data->update_lock);
+	return count;
+}
+
+#define fan_auto_channel_offset(offset)						\
+static ssize_t show_fan_auto_channel_##offset (struct device *dev, char *buf)	\
+{										\
+	return show_fan_auto_channel(dev, buf, 0x##offset - 1);			\
+}										\
+static ssize_t set_fan_auto_channel_##offset (struct device *dev,		\
+	const char *buf, size_t count)						\
+{										\
+	return set_fan_auto_channel(dev, buf, count, 0x##offset - 1);		\
+}										\
+static DEVICE_ATTR(auto_fan##offset##_channel, S_IRUGO | S_IWUSR,		\
+		   show_fan_auto_channel_##offset,				\
+		   set_fan_auto_channel_##offset)
+
+fan_auto_channel_offset(1);
+fan_auto_channel_offset(2);
+
+/* Auto Temps */
+static ssize_t show_auto_temp_off(struct device *dev, char *buf, int nr)
+{
+	struct adm1031_data *data = adm1031_update_device(dev);
+	return sprintf(buf, "%d\n", 
+		       AUTO_TEMP_OFF_FROM_REG(data->auto_temp[nr]));
+}
+static ssize_t show_auto_temp_min(struct device *dev, char *buf, int nr)
+{
+	struct adm1031_data *data = adm1031_update_device(dev);
+	return sprintf(buf, "%d\n",
+		       AUTO_TEMP_MIN_FROM_REG(data->auto_temp[nr]));
+}
+static ssize_t
+set_auto_temp_min(struct device *dev, const char *buf, size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1031_data *data = i2c_get_clientdata(client);
+	int val;
+
+	down(&data->update_lock);
+	val = simple_strtol(buf, NULL, 10);
+	data->auto_temp[nr] = AUTO_TEMP_MIN_TO_REG(val, data->auto_temp[nr]);
+	adm1031_write_value(client, ADM1031_REG_AUTO_TEMP(nr),
+			    data->auto_temp[nr]);
+	up(&data->update_lock);
+	return count;
+}
+static ssize_t show_auto_temp_max(struct device *dev, char *buf, int nr)
+{
+	struct adm1031_data *data = adm1031_update_device(dev);
+	return sprintf(buf, "%d\n",
+		       AUTO_TEMP_MAX_FROM_REG(data->auto_temp[nr]));
+}
+static ssize_t
+set_auto_temp_max(struct device *dev, const char *buf, size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1031_data *data = i2c_get_clientdata(client);
+	int val;
+
+	down(&data->update_lock);
+	val = simple_strtol(buf, NULL, 10);
+	data->temp_max[nr] = AUTO_TEMP_MAX_TO_REG(val, data->auto_temp[nr], data->pwm[nr]);
+	adm1031_write_value(client, ADM1031_REG_AUTO_TEMP(nr),
+			    data->temp_max[nr]);
+	up(&data->update_lock);
+	return count;
+}
+
+#define auto_temp_reg(offset)							\
+static ssize_t show_auto_temp_##offset##_off (struct device *dev, char *buf)	\
+{										\
+	return show_auto_temp_off(dev, buf, 0x##offset - 1);			\
+}										\
+static ssize_t show_auto_temp_##offset##_min (struct device *dev, char *buf)	\
+{										\
+	return show_auto_temp_min(dev, buf, 0x##offset - 1);			\
+}										\
+static ssize_t show_auto_temp_##offset##_max (struct device *dev, char *buf)	\
+{										\
+	return show_auto_temp_max(dev, buf, 0x##offset - 1);			\
+}										\
+static ssize_t set_auto_temp_##offset##_min (struct device *dev,		\
+					     const char *buf, size_t count)	\
+{										\
+	return set_auto_temp_min(dev, buf, count, 0x##offset - 1);		\
+}										\
+static ssize_t set_auto_temp_##offset##_max (struct device *dev,		\
+					     const char *buf, size_t count)	\
+{										\
+	return set_auto_temp_max(dev, buf, count, 0x##offset - 1);		\
+}										\
+static DEVICE_ATTR(auto_temp##offset##_off, S_IRUGO,				\
+		   show_auto_temp_##offset##_off, NULL);			\
+static DEVICE_ATTR(auto_temp##offset##_min, S_IRUGO | S_IWUSR,			\
+		   show_auto_temp_##offset##_min, set_auto_temp_##offset##_min);\
+static DEVICE_ATTR(auto_temp##offset##_max, S_IRUGO | S_IWUSR,			\
+		   show_auto_temp_##offset##_max, set_auto_temp_##offset##_max)
+
+auto_temp_reg(1);
+auto_temp_reg(2);
+auto_temp_reg(3);
+
+/* pwm */
+static ssize_t show_pwm(struct device *dev, char *buf, int nr)
+{
+	struct adm1031_data *data = adm1031_update_device(dev);
+	return sprintf(buf, "%d\n", PWM_FROM_REG(data->pwm[nr]));
+}
+static ssize_t
+set_pwm(struct device *dev, const char *buf, size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1031_data *data = i2c_get_clientdata(client);
+	int val;
+	int reg;
+	down(&data->update_lock);
+	val = simple_strtol(buf, NULL, 10);
+	if ((data->conf1 & ADM1031_CONF1_AUTO_MODE) && 
+	    (((val>>4) & 0xf) != 5)) {
+		/* In automatic mode, the only PWM accepted is 33% */
+		up(&data->update_lock);
+		return -EINVAL;
+	}
+	data->pwm[nr] = PWM_TO_REG(val);
+	reg = adm1031_read_value(client, ADM1031_REG_PWM);
+	adm1031_write_value(client, ADM1031_REG_PWM,
+			    nr ? ((data->pwm[nr] << 4) & 0xf0) | (reg & 0xf)
+			    : (data->pwm[nr] & 0xf) | (reg & 0xf0));
+	up(&data->update_lock);
+	return count;
+}
+
+#define pwm_reg(offset)							\
+static ssize_t show_pwm_##offset (struct device *dev, char *buf)	\
+{									\
+	return show_pwm(dev, buf, 0x##offset - 1);			\
+}									\
+static ssize_t set_pwm_##offset (struct device *dev,			\
+				 const char *buf, size_t count)		\
+{									\
+	return set_pwm(dev, buf, count, 0x##offset - 1);		\
+}									\
+static DEVICE_ATTR(fan##offset##_pwm, S_IRUGO | S_IWUSR,		\
+		   show_pwm_##offset, set_pwm_##offset)
+
+pwm_reg(1);
+pwm_reg(2);
+
+/* Fans */
+
+/*
+ * That function checks the cases where the fan reading is not
+ * relevent.  It is used to provide 0 as fan reading when the fan is
+ * not supposed to run
+ */
+static int trust_fan_readings(struct adm1031_data *data, int chan)
+{
+	int res = 0;
+
+	if (data->conf1 & ADM1031_CONF1_AUTO_MODE) {
+		switch (data->conf1 & 0x60) {
+		case 0x00:	/* remote temp1 controls fan1 remote temp2 controls fan2 */
+			res = data->temp[chan+1] >=
+			      AUTO_TEMP_MIN_FROM_REG_DEG(data->auto_temp[chan+1]);
+			break;
+		case 0x20:	/* remote temp1 controls both fans */
+			res =
+			    data->temp[1] >=
+			    AUTO_TEMP_MIN_FROM_REG_DEG(data->auto_temp[1]);
+			break;
+		case 0x40:	/* remote temp2 controls both fans */
+			res =
+			    data->temp[2] >=
+			    AUTO_TEMP_MIN_FROM_REG_DEG(data->auto_temp[2]);
+			break;
+		case 0x60:	/* max controls both fans */
+			res =
+			    data->temp[0] >=
+			    AUTO_TEMP_MIN_FROM_REG_DEG(data->auto_temp[0])
+			    || data->temp[1] >=
+			    AUTO_TEMP_MIN_FROM_REG_DEG(data->auto_temp[1])
+			    || (data->chip_type == adm1031 
+				&& data->temp[2] >=
+				AUTO_TEMP_MIN_FROM_REG_DEG(data->auto_temp[2]));
+			break;
+		}
+	} else {
+		res = data->pwm[chan] > 0;
+	}
+	return res;
+}
+
+
+static ssize_t show_fan(struct device *dev, char *buf, int nr)
+{
+	struct adm1031_data *data = adm1031_update_device(dev);
+	int value;
+
+	value = trust_fan_readings(data, nr) ? FAN_FROM_REG(data->fan[nr],
+				 FAN_DIV_FROM_REG(data->fan_div[nr])) : 0;
+	return sprintf(buf, "%d\n", value);
+}
+
+static ssize_t show_fan_div(struct device *dev, char *buf, int nr)
+{
+	struct adm1031_data *data = adm1031_update_device(dev);
+	return sprintf(buf, "%d\n", FAN_DIV_FROM_REG(data->fan_div[nr]));
+}
+static ssize_t show_fan_min(struct device *dev, char *buf, int nr)
+{
+	struct adm1031_data *data = adm1031_update_device(dev);
+	return sprintf(buf, "%d\n",
+		       FAN_FROM_REG(data->fan_min[nr],
+				    FAN_DIV_FROM_REG(data->fan_div[nr])));
+}
+static ssize_t
+set_fan_min(struct device *dev, const char *buf, size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1031_data *data = i2c_get_clientdata(client);
+	int val;
+
+	down(&data->update_lock);
+	val = simple_strtol(buf, NULL, 10);
+	if (val) {
+		data->fan_min[nr] = 
+			FAN_TO_REG(val, FAN_DIV_FROM_REG(data->fan_div[nr]));
+	} else {
+		data->fan_min[nr] = 0xff;
+	}
+	adm1031_write_value(client, ADM1031_REG_FAN_MIN(nr), data->fan_min[nr]);
+	up(&data->update_lock);
+	return count;
+}
+static ssize_t
+set_fan_div(struct device *dev, const char *buf, size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1031_data *data = i2c_get_clientdata(client);
+	int val;
+	u8 tmp;
+	int old_div = FAN_DIV_FROM_REG(data->fan_div[nr]);
+	int new_min;
+
+	val = simple_strtol(buf, NULL, 10);
+	tmp = val == 8 ? 0xc0 :
+	      val == 4 ? 0x80 :
+	      val == 2 ? 0x40 :	
+	      val == 1 ? 0x00 :  
+	      0xff;
+	if (tmp == 0xff)
+		return -EINVAL;
+	down(&data->update_lock);
+	data->fan_div[nr] = (tmp & 0xC0) | (0x3f & data->fan_div[nr]);
+	new_min = data->fan_min[nr] * old_div / 
+		FAN_DIV_FROM_REG(data->fan_div[nr]);
+	data->fan_min[nr] = new_min > 0xff ? 0xff : new_min;
+	data->fan[nr] = data->fan[nr] * old_div / 
+		FAN_DIV_FROM_REG(data->fan_div[nr]);
+
+	adm1031_write_value(client, ADM1031_REG_FAN_DIV(nr), 
+			    data->fan_div[nr]);
+	adm1031_write_value(client, ADM1031_REG_FAN_MIN(nr), 
+			    data->fan_min[nr]);
+	up(&data->update_lock);
+	return count;
+}
+
+#define fan_offset(offset)						\
+static ssize_t show_fan_##offset (struct device *dev, char *buf)	\
+{									\
+	return show_fan(dev, buf, 0x##offset - 1);			\
+}									\
+static ssize_t show_fan_##offset##_min (struct device *dev, char *buf)	\
+{									\
+	return show_fan_min(dev, buf, 0x##offset - 1);			\
+}									\
+static ssize_t show_fan_##offset##_div (struct device *dev, char *buf)	\
+{									\
+	return show_fan_div(dev, buf, 0x##offset - 1);			\
+}									\
+static ssize_t set_fan_##offset##_min (struct device *dev,		\
+	const char *buf, size_t count)					\
+{									\
+	return set_fan_min(dev, buf, count, 0x##offset - 1);		\
+}									\
+static ssize_t set_fan_##offset##_div (struct device *dev,		\
+	const char *buf, size_t count)					\
+{									\
+	return set_fan_div(dev, buf, count, 0x##offset - 1);		\
+}									\
+static DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_fan_##offset,	\
+		   NULL);						\
+static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR,		\
+		   show_fan_##offset##_min, set_fan_##offset##_min);	\
+static DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR,		\
+		   show_fan_##offset##_div, set_fan_##offset##_div);	\
+static DEVICE_ATTR(auto_fan##offset##_min_pwm, S_IRUGO | S_IWUSR,	\
+		   show_pwm_##offset, set_pwm_##offset)
+
+fan_offset(1);
+fan_offset(2);
+
+
+/* Temps */
+static ssize_t show_temp(struct device *dev, char *buf, int nr)
+{
+	struct adm1031_data *data = adm1031_update_device(dev);
+	int ext;
+	ext = nr == 0 ?
+	    ((data->ext_temp[nr] >> 6) & 0x3) * 2 :
+	    (((data->ext_temp[nr] >> ((nr - 1) * 3)) & 7));
+	return sprintf(buf, "%d\n", TEMP_FROM_REG_EXT(data->temp[nr], ext));
+}
+static ssize_t show_temp_min(struct device *dev, char *buf, int nr)
+{
+	struct adm1031_data *data = adm1031_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_min[nr]));
+}
+static ssize_t show_temp_max(struct device *dev, char *buf, int nr)
+{
+	struct adm1031_data *data = adm1031_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[nr]));
+}
+static ssize_t show_temp_crit(struct device *dev, char *buf, int nr)
+{
+	struct adm1031_data *data = adm1031_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_crit[nr]));
+}
+static ssize_t
+set_temp_min(struct device *dev, const char *buf, size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1031_data *data = i2c_get_clientdata(client);
+	int val;
+
+	val = simple_strtol(buf, NULL, 10);
+	val = SENSORS_LIMIT(val, -55000, nr == 0 ? 127750 : 127875);
+	down(&data->update_lock);
+	data->temp_min[nr] = TEMP_TO_REG(val);
+	adm1031_write_value(client, ADM1031_REG_TEMP_MIN(nr),
+			    data->temp_min[nr]);
+	up(&data->update_lock);
+	return count;
+}
+static ssize_t
+set_temp_max(struct device *dev, const char *buf, size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1031_data *data = i2c_get_clientdata(client);
+	int val;
+
+	val = simple_strtol(buf, NULL, 10);
+	val = SENSORS_LIMIT(val, -55000, nr == 0 ? 127750 : 127875);
+	down(&data->update_lock);
+	data->temp_max[nr] = TEMP_TO_REG(val);
+	adm1031_write_value(client, ADM1031_REG_TEMP_MAX(nr),
+			    data->temp_max[nr]);
+	up(&data->update_lock);
+	return count;
+}
+static ssize_t
+set_temp_crit(struct device *dev, const char *buf, size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1031_data *data = i2c_get_clientdata(client);
+	int val;
+
+	val = simple_strtol(buf, NULL, 10);
+	val = SENSORS_LIMIT(val, -55000, nr == 0 ? 127750 : 127875);
+	down(&data->update_lock);
+	data->temp_crit[nr] = TEMP_TO_REG(val);
+	adm1031_write_value(client, ADM1031_REG_TEMP_CRIT(nr),
+			    data->temp_crit[nr]);
+	up(&data->update_lock);
+	return count;
+}
+
+#define temp_reg(offset)							\
+static ssize_t show_temp_##offset (struct device *dev, char *buf)		\
+{										\
+	return show_temp(dev, buf, 0x##offset - 1);				\
+}										\
+static ssize_t show_temp_##offset##_min (struct device *dev, char *buf)		\
+{										\
+	return show_temp_min(dev, buf, 0x##offset - 1);				\
+}										\
+static ssize_t show_temp_##offset##_max (struct device *dev, char *buf)		\
+{										\
+	return show_temp_max(dev, buf, 0x##offset - 1);				\
+}										\
+static ssize_t show_temp_##offset##_crit (struct device *dev, char *buf)	\
+{										\
+	return show_temp_crit(dev, buf, 0x##offset - 1);			\
+}										\
+static ssize_t set_temp_##offset##_min (struct device *dev,			\
+					const char *buf, size_t count)		\
+{										\
+	return set_temp_min(dev, buf, count, 0x##offset - 1);			\
+}										\
+static ssize_t set_temp_##offset##_max (struct device *dev,			\
+					const char *buf, size_t count)		\
+{										\
+	return set_temp_max(dev, buf, count, 0x##offset - 1);			\
+}										\
+static ssize_t set_temp_##offset##_crit (struct device *dev,			\
+					 const char *buf, size_t count)		\
+{										\
+	return set_temp_crit(dev, buf, count, 0x##offset - 1);			\
+}										\
+static DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_temp_##offset,		\
+		   NULL);							\
+static DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR,			\
+		   show_temp_##offset##_min, set_temp_##offset##_min);		\
+static DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR,			\
+		   show_temp_##offset##_max, set_temp_##offset##_max);		\
+static DEVICE_ATTR(temp##offset##_crit, S_IRUGO | S_IWUSR,			\
+		   show_temp_##offset##_crit, set_temp_##offset##_crit)
+
+temp_reg(1);
+temp_reg(2);
+temp_reg(3);
+
+/* Alarms */
+static ssize_t show_alarms(struct device *dev, char *buf)
+{
+	struct adm1031_data *data = adm1031_update_device(dev);
+	return sprintf(buf, "%d\n", data->alarm);
+}
+
+static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
+
+
+static int adm1031_attach_adapter(struct i2c_adapter *adapter)
+{
+	if (!(adapter->class & I2C_CLASS_HWMON))
+		return 0;
+	return i2c_detect(adapter, &addr_data, adm1031_detect);
+}
+
+/* This function is called by i2c_detect */
+static int adm1031_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+	struct i2c_client *new_client;
+	struct adm1031_data *data;
+	int err = 0;
+	const char *name = "";
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		goto exit;
+
+	if (!(data = kmalloc(sizeof(struct adm1031_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto exit;
+	}
+	memset(data, 0, sizeof(struct adm1031_data));
+
+	new_client = &data->client;
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = address;
+	new_client->adapter = adapter;
+	new_client->driver = &adm1031_driver;
+	new_client->flags = 0;
+
+	if (kind < 0) {
+		int id, co;
+		id = i2c_smbus_read_byte_data(new_client, 0x3d);
+		co = i2c_smbus_read_byte_data(new_client, 0x3e);
+
+		if (!((id == 0x31 || id == 0x30) && co == 0x41))
+			goto exit_free;
+		kind = (id == 0x30) ? adm1030 : adm1031;
+	}
+
+	if (kind <= 0)
+		kind = adm1031;
+
+	/* Given the detected chip type, set the chip name and the
+	 * auto fan control helper table. */
+	if (kind == adm1030) {
+		name = "adm1030";
+		data->chan_select_table = &auto_channel_select_table_adm1030;
+	} else if (kind == adm1031) {
+		name = "adm1031";
+		data->chan_select_table = &auto_channel_select_table_adm1031;
+	}
+	data->chip_type = kind;
+
+	strlcpy(new_client->name, name, I2C_NAME_SIZE);
+
+	new_client->id = adm1031_id++;
+	data->valid = 0;
+	init_MUTEX(&data->update_lock);
+
+	/* Tell the I2C layer a new client has arrived */
+	if ((err = i2c_attach_client(new_client)))
+		goto exit_free;
+
+	/* Initialize the ADM1031 chip */
+	adm1031_init_client(new_client);
+
+	/* Register sysfs hooks */
+	device_create_file(&new_client->dev, &dev_attr_fan1_input);
+	device_create_file(&new_client->dev, &dev_attr_fan1_div);
+	device_create_file(&new_client->dev, &dev_attr_fan1_min);
+	device_create_file(&new_client->dev, &dev_attr_fan1_pwm);
+	device_create_file(&new_client->dev, &dev_attr_auto_fan1_channel);
+	device_create_file(&new_client->dev, &dev_attr_temp1_input);
+	device_create_file(&new_client->dev, &dev_attr_temp1_min);
+	device_create_file(&new_client->dev, &dev_attr_temp1_max);
+	device_create_file(&new_client->dev, &dev_attr_temp1_crit);
+	device_create_file(&new_client->dev, &dev_attr_temp2_input);
+	device_create_file(&new_client->dev, &dev_attr_temp2_min);
+	device_create_file(&new_client->dev, &dev_attr_temp2_max);
+	device_create_file(&new_client->dev, &dev_attr_temp2_crit);
+
+	device_create_file(&new_client->dev, &dev_attr_auto_temp1_off);
+	device_create_file(&new_client->dev, &dev_attr_auto_temp1_min);
+	device_create_file(&new_client->dev, &dev_attr_auto_temp1_max);
+
+	device_create_file(&new_client->dev, &dev_attr_auto_temp2_off);
+	device_create_file(&new_client->dev, &dev_attr_auto_temp2_min);
+	device_create_file(&new_client->dev, &dev_attr_auto_temp2_max);
+
+	device_create_file(&new_client->dev, &dev_attr_auto_fan1_min_pwm);
+
+	device_create_file(&new_client->dev, &dev_attr_alarms);
+
+	if (kind == adm1031) {
+		device_create_file(&new_client->dev, &dev_attr_fan2_input);
+		device_create_file(&new_client->dev, &dev_attr_fan2_div);
+		device_create_file(&new_client->dev, &dev_attr_fan2_min);
+		device_create_file(&new_client->dev, &dev_attr_fan2_pwm);
+		device_create_file(&new_client->dev,
+				   &dev_attr_auto_fan2_channel);
+		device_create_file(&new_client->dev, &dev_attr_temp3_input);
+		device_create_file(&new_client->dev, &dev_attr_temp3_min);
+		device_create_file(&new_client->dev, &dev_attr_temp3_max);
+		device_create_file(&new_client->dev, &dev_attr_temp3_crit);
+		device_create_file(&new_client->dev, &dev_attr_auto_temp3_off);
+		device_create_file(&new_client->dev, &dev_attr_auto_temp3_min);
+		device_create_file(&new_client->dev, &dev_attr_auto_temp3_max);
+		device_create_file(&new_client->dev, &dev_attr_auto_fan2_min_pwm);
+	}
+
+	return 0;
+
+exit_free:
+	kfree(new_client);
+exit:
+	return err;
+}
+
+static int adm1031_detach_client(struct i2c_client *client)
+{
+	int ret;
+	if ((ret = i2c_detach_client(client)) != 0) {
+		return ret;
+	}
+	kfree(client);
+	return 0;
+}
+
+static inline u8 adm1031_read_value(struct i2c_client *client, u8 reg)
+{
+	return i2c_smbus_read_byte_data(client, reg);
+}
+
+static inline int
+adm1031_write_value(struct i2c_client *client, u8 reg, unsigned int value)
+{
+	return i2c_smbus_write_byte_data(client, reg, value);
+}
+
+static void adm1031_init_client(struct i2c_client *client)
+{
+	unsigned int read_val;
+	unsigned int mask;
+	struct adm1031_data *data = i2c_get_clientdata(client);
+
+	mask = (ADM1031_CONF2_PWM1_ENABLE | ADM1031_CONF2_TACH1_ENABLE);
+	if (data->chip_type == adm1031) {
+		mask |= (ADM1031_CONF2_PWM2_ENABLE |
+			ADM1031_CONF2_TACH2_ENABLE);
+	} 
+	/* Initialize the ADM1031 chip (enables fan speed reading ) */
+	read_val = adm1031_read_value(client, ADM1031_REG_CONF2);
+	if ((read_val | mask) != read_val) {
+	    adm1031_write_value(client, ADM1031_REG_CONF2, read_val | mask);
+	}
+
+	read_val = adm1031_read_value(client, ADM1031_REG_CONF1);
+	if ((read_val | ADM1031_CONF1_MONITOR_ENABLE) != read_val) {
+	    adm1031_write_value(client, ADM1031_REG_CONF1, read_val |
+				ADM1031_CONF1_MONITOR_ENABLE);
+	}
+
+}
+
+static struct adm1031_data *adm1031_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm1031_data *data = i2c_get_clientdata(client);
+	int chan;
+
+	down(&data->update_lock);
+
+	if ((jiffies - data->last_updated > HZ + HZ / 2) ||
+	    (jiffies < data->last_updated) || !data->valid) {
+
+		dev_dbg(&client->dev, "Starting adm1031 update\n");
+		for (chan = 0;
+		     chan < ((data->chip_type == adm1031) ? 3 : 2); chan++) {
+			u8 oldh, newh;
+
+			oldh =
+			    adm1031_read_value(client, ADM1031_REG_TEMP(chan));
+			data->ext_temp[chan] =
+			    adm1031_read_value(client, ADM1031_REG_EXT_TEMP);
+			newh =
+			    adm1031_read_value(client, ADM1031_REG_TEMP(chan));
+			if (newh != oldh) {
+				data->ext_temp[chan] =
+				    adm1031_read_value(client,
+						       ADM1031_REG_EXT_TEMP);
+#ifdef DEBUG
+				oldh =
+				    adm1031_read_value(client,
+						       ADM1031_REG_TEMP(chan));
+
+				/* oldh is actually newer */
+				if (newh != oldh)
+					dev_warn(&client->dev,
+						 "Remote temperature may be "
+						 "wrong.\n");
+#endif
+			}
+			data->temp[chan] = newh;
+
+			data->temp_min[chan] =
+			    adm1031_read_value(client,
+					       ADM1031_REG_TEMP_MIN(chan));
+			data->temp_max[chan] =
+			    adm1031_read_value(client,
+					       ADM1031_REG_TEMP_MAX(chan));
+			data->temp_crit[chan] =
+			    adm1031_read_value(client,
+					       ADM1031_REG_TEMP_CRIT(chan));
+			data->auto_temp[chan] =
+			    adm1031_read_value(client,
+					       ADM1031_REG_AUTO_TEMP(chan));
+
+		}
+
+		data->conf1 = adm1031_read_value(client, ADM1031_REG_CONF1);
+		data->conf2 = adm1031_read_value(client, ADM1031_REG_CONF2);
+
+		data->alarm = adm1031_read_value(client, ADM1031_REG_STATUS(0))
+			     | (adm1031_read_value(client, ADM1031_REG_STATUS(1))
+				<< 8);
+		if (data->chip_type == adm1030) {
+			data->alarm &= 0xc0ff;
+		}
+		
+		for (chan=0; chan<(data->chip_type == adm1030 ? 1 : 2); chan++) {
+			data->fan_div[chan] =
+			    adm1031_read_value(client, ADM1031_REG_FAN_DIV(chan));
+			data->fan_min[chan] =
+			    adm1031_read_value(client, ADM1031_REG_FAN_MIN(chan));
+			data->fan[chan] =
+			    adm1031_read_value(client, ADM1031_REG_FAN_SPEED(chan));
+			data->pwm[chan] =
+			    0xf & (adm1031_read_value(client, ADM1031_REG_PWM) >> 
+				   (4*chan));
+		}
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+
+	up(&data->update_lock);
+
+	return data;
+}
+
+static int __init sensors_adm1031_init(void)
+{
+	return i2c_add_driver(&adm1031_driver);
+}
+
+static void __exit sensors_adm1031_exit(void)
+{
+	i2c_del_driver(&adm1031_driver);
+}
+
+MODULE_AUTHOR("Alexandre d'Alton <alex at alexdalton.org>");
+MODULE_DESCRIPTION("ADM1031/ADM1030 driver");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_adm1031_init);
+module_exit(sensors_adm1031_exit);



[Index of Archives]     [Linux Kernel]     [Linux Hardware Monitoring]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux