Hello, I currently use sensors2.8.6 with kernel 2.6.6 I use the chip 'W83627HF (ISA)', the module loaded are ( i2c_isa, i2c_nforce, w83781d, i2c_sensor, i2c_core) all seems to work well, except that the min and max value of in0 and in1 are odd, approximately 1.41V for max although the average value for amd duron proc is 1.5V to correct this I changed the vrm value as adviced ( with set vrm 9.0 ) but it did not change the vid value ( I did of course sensors -s after each modification ) I did not have this pb before, do you know what is going on ? I also noticed that there is no /proc/sys/dev/../vid file, for me all is located in /sys/bus/i2c/../(all files except vid) --- I noticed on your web site that the ship 'W83627HF (ISA)' has a specific driver that is not the on I use, is this one better ? When running 'sensors-detect' I was not offered to load W83627HF , can I safely replace w83781d with W83627HF ? Best regards edouard -- *-----------------------------------------------------------------* | Edouard DEBRY | | Ph-D student at E.N.P.C - C.E.R.E.A http://www.enpc.fr/cerea/ | | | | 21 Rue Nobel, Cit? Descartes TEL : 33 1 64 15 21 52 | | 77455 CHAMPS SUR MARNE MAIL : debry at cerea.enpc.fr | | | | Thesis subject: MODELING OF AN ATMOSPHERIC AEROSOL DISTRIBUTION | *-----------------------------------------------------------------*
