[PLEASE REPLY TO THE LIST, NOT TO ME ONLY] > i've made sure all files are the current version, i do not have any > old libraries, or any other old files from older versions. > > the only interesting fact which i've just discovered, is that i can > read temperatures if i do this: > > [root at ekolaptis it87-isa-0290]# cat temp1 > 40.0 15.0 52.0 > [root at ekolaptis it87-isa-0290]# cat temp2 > 45.0 15.0 -28.0 > [root at ekolaptis it87-isa-0290]# cat temp3 > 45.0 15.0 127.0 > > i found a bunch of files under /proc/sys/dev/sensors/it87-isa-0290 > which i can read without any problem. > > doing 'sensors' still results in this error: > it87-isa-0290 > Adapter: ISA adapter > VCore 1: +1.72 V (min = +1.42 V, max = +1.56 V) ALARM > VCore 2: +0.00 V (min = +2.40 V, max = +2.60 V) ALARM > +3.3V: +6.42 V (min = +3.12 V, max = +3.44 V) ALARM > +5V: +4.89 V (min = +4.72 V, max = +5.24 V) > +12V: +12.08 V (min = +11.36 V, max = +12.60 V) > -12V: -27.36 V (min = -12.63 V, max = -11.41 V) ALARM > -5V: -13.64 V (min = -5.28 V, max = -4.81 V) ALARM > Stdby: +4.97 V (min = +4.72 V, max = +5.24 V) > VBat: +4.08 V > fan1: 0 RPM (min = 0 RPM, div = 2) > fan2: 0 RPM (min = 3000 RPM, div = 2) ALARM > fan3: 0 RPM (min = 3000 RPM, div = 2) ALARM > ERROR: Can't get TEMP1 data! > ERROR: Can't get TEMP2 data! > ERROR: Can't get TEMP3 data! > > i'm out of ideas :( A still have a few ones, don't panic ;) First of all, please provide the output of: sensors -v sensors -u Second, do you see files named "sensor1", "sensor2" and "sensor3" in the same place you saw "temp1", "temp2" and "temp3"? Thanks. -- Jean Delvare http://www.ensicaen.ismra.fr/~delvare/
