ChangeSet 1.1643.36.22, 2004/04/09 12:06:16-07:00, greg at kroah.com [PATCH] I2C: clean up out of order bus Makefile and Kconfig entries. drivers/i2c/busses/Kconfig | 16 ++++++++-------- drivers/i2c/busses/Makefile | 2 +- 2 files changed, 9 insertions(+), 9 deletions(-) diff -Nru a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig --- a/drivers/i2c/busses/Kconfig Wed Apr 14 15:13:05 2004 +++ b/drivers/i2c/busses/Kconfig Wed Apr 14 15:13:05 2004 @@ -5,29 +5,29 @@ menu "I2C Hardware Bus support" depends on I2C -config I2C_ALI1563 - tristate "ALI 1563" +config I2C_ALI1535 + tristate "ALI 1535" depends on I2C && PCI && EXPERIMENTAL help If you say yes to this option, support will be included for the SMB - Host controller on Acer Labs Inc. (ALI) M1563 South Bridges. The SMB + Host controller on Acer Labs Inc. (ALI) M1535 South Bridges. The SMB controller is part of the 7101 device, which is an ACPI-compliant Power Management Unit (PMU). This driver can also be built as a module. If so, the module - will be called i2c-ali1563. + will be called i2c-ali1535. -config I2C_ALI1535 - tristate "ALI 1535" +config I2C_ALI1563 + tristate "ALI 1563" depends on I2C && PCI && EXPERIMENTAL help If you say yes to this option, support will be included for the SMB - Host controller on Acer Labs Inc. (ALI) M1535 South Bridges. The SMB + Host controller on Acer Labs Inc. (ALI) M1563 South Bridges. The SMB controller is part of the 7101 device, which is an ACPI-compliant Power Management Unit (PMU). This driver can also be built as a module. If so, the module - will be called i2c-ali1535. + will be called i2c-ali1563. config I2C_ALI15X3 tristate "ALI 15x3" diff -Nru a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile --- a/drivers/i2c/busses/Makefile Wed Apr 14 15:13:05 2004 +++ b/drivers/i2c/busses/Makefile Wed Apr 14 15:13:05 2004 @@ -3,8 +3,8 @@ # obj-$(CONFIG_I2C_ALI1535) += i2c-ali1535.o -obj-$(CONFIG_I2C_ALI15X3) += i2c-ali15x3.o obj-$(CONFIG_I2C_ALI1563) += i2c-ali1563.o +obj-$(CONFIG_I2C_ALI15X3) += i2c-ali15x3.o obj-$(CONFIG_I2C_AMD756) += i2c-amd756.o obj-$(CONFIG_I2C_AMD8111) += i2c-amd8111.o obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o
