ChangeSet 1.1557.61.14, 2004/02/23 16:33:50-08:00, khali at linux-fr.org
[PATCH] I2C: Remove asb100 support from w83781d
Now that we have a separate asb100 driver, we can remove the (bad)
support of it from the w83781d driver. Following patch does this. I've
already cleaned this up in our CVS repository.
drivers/i2c/chips/w83781d.c | 11 ++++-------
1 files changed, 4 insertions(+), 7 deletions(-)
diff -Nru a/drivers/i2c/chips/w83781d.c b/drivers/i2c/chips/w83781d.c
--- a/drivers/i2c/chips/w83781d.c Mon Mar 15 14:36:37 2004
+++ b/drivers/i2c/chips/w83781d.c Mon Mar 15 14:36:37 2004
@@ -25,8 +25,7 @@
Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA
as99127f 7 3 1? 3 0x31 0x12c3 yes no
- as99127f rev.2 (type_name = 1299127f) 0x31 0x5ca3 yes no
- asb100 "bach" (type_name = as99127f) 0x31 0x0694 yes no
+ as99127f rev.2 (type_name = as99127f) 0x31 0x5ca3 yes no
w83781d 7 3 0 3 0x10-1 0x5ca3 yes yes
w83627hf 9 3 2 3 0x21 0x5ca3 yes yes(LPC)
w83627thf 9 3 2 3 0x90 0x5ca3 no yes(LPC)
@@ -1194,10 +1193,8 @@
val2 = w83781d_read_value(new_client, W83781D_REG_CHIPMAN);
/* Check for Winbond or Asus ID if in bank 0 */
if ((!(val1 & 0x07)) &&
- (((!(val1 & 0x80)) && (val2 != 0xa3) && (val2 != 0xc3)
- && (val2 != 0x94))
- || ((val1 & 0x80) && (val2 != 0x5c) && (val2 != 0x12)
- && (val2 != 0x06)))) {
+ (((!(val1 & 0x80)) && (val2 != 0xa3) && (val2 != 0xc3))
+ || ((val1 & 0x80) && (val2 != 0x5c) && (val2 != 0x12)))) {
err = -ENODEV;
goto ERROR2;
}
@@ -1226,7 +1223,7 @@
val2 = w83781d_read_value(new_client, W83781D_REG_CHIPMAN);
if (val2 == 0x5c)
vendid = winbond;
- else if ((val2 == 0x12) || (val2 == 0x06))
+ else if (val2 == 0x12)
vendid = asus;
else {
err = -ENODEV;
