Thank you for your instant response. You sure don't get that from
Microsquash!
I tried what you suggested: I copied
kernel-2.4.7-athlon.config
into /usr/src/linux-2.4/.config as I have an AMD athlon processor. I then did make clean on both the i2c and lm makefiles. A lot of stuff was removed. And then make install on i2c.
I got the same "Error 1" message but did not get the message
grep: /lib/modules/2.4.7-10/build/.config: No such file or directory
Don't spoil your Sunday on it. I am not an expert kernel builder so it is possible that there is something I should know that I don't.
Mark M. Hoffman wrote:
>Hi John:
>
>* John Palsedge <palsedgj at colorado.net> [2004-03-14 08:58:39 -0700]:
>
>>System: Red Hat 7.2, 2.4.7-10 kernel
>>download: i2c-2.7.0.tar.gz
>>
>>Makefile: default (include files -> /usr/local/include)
>>
>>compile seemed to go OK.
>>
>>make install (ran as root) failed with messages:
>>
>>grep: /lib/modules/2.4.7-10/build/.config: No such file or directory
>> (true)
>>Note: /lib/modules/2.4.7-10/build -> ../../../usr/src/linux-2.4.7-10/,
>>contents of which are
>>
>>abi/ CREDITS include/ lib/ net/ scripts/
>>arch/ Documentation/ init/ MAINTAINERS README
>>configs/ drivers/ ipc/ Makefile REPORTING-BUGS
>>COPYING fs/ kernel/ mm/ Rules.make
>>
>>contents of configs is
>>
>>kernel-2.4.7-athlon.config kernel-2.4.7-i586-smp.config
>>kernel-2.4.7-athlon-smp.config kernel-2.4.7-i686.config
>>kernel-2.4.7-i386-BOOT.config kernel-2.4.7-i686-debug.config
>>kernel-2.4.7-i386.config kernel-2.4.7-i686-enterprise.config
>>kernel-2.4.7-i386-smp.con
>>
>
><snip>
>
>Pick one of these, as appropriate to your system, and copy it to
>/usr/src/linux-2.4/.config
>
>Then "make clean" in both i2c and lm_sensors2. Now the build and
>install should proceed ok.
>
>Regards,
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20040314/179244f3/attachment.html
