Looks like I don't need a new kernel after all, make -f Makefile.p4b insmod p4b_smbus.o modprobe i2c-core modprobe i2c-i801 modprobe i2c-dev modprobe i2c-proc modprobe adm1026 [root at gb0010 sensors]# cat /proc/bus/i2c i2c-1 smbus SMBus I801 adapter at 0600 Non-I2C SMBus adapter Still no luck, though, [root at gb0010 sensors]# ./sensors-detect This program will help you determine which I2C/SMBus modules you need to load to use lm_sensors most effectively. You need to have i2c and lm_sensors installed before running this program. Also, you need to be `root', or at least have access to the /dev/i2c-* files, for most things. If you have patched your kernel and have some drivers built in, you can safely answer NO if asked to load some modules. In this case, things may seem a bit confusing, but they will still work. We can start with probing for (PCI) I2C or SMBus adapters. You do not need any special privileges for this. Do you want to probe now? (YES/no): Probing for PCI bus adapters... Use driver `i2c-i801' for device 00:1f.3: Intel 82801DB ICH4 Probe succesfully concluded. We will now try to load each adapter module in turn. Module `i2c-i801' already loaded. Do you now want to be prompted for non-detectable adapters? (yes/NO): To continue, we need module `i2c-dev' to be loaded. If it is built-in into your kernel, you can safely skip this. i2c-dev is already loaded. We are now going to do the adapter probings. Some adapters may hang halfway through; we can't really help that. Also, some chips will be double detected; we choose the one with the highest confidence value in that case. If you found that the adapter hung after probing a certain address, you can specify that address to remain unprobed. That often includes address 0x69 (clock chip). Next adapter: SMBus I801 adapter at 0600 (Non-I2C SMBus adapter) Do you want to scan it? (YES/no/selectively): Some chips are also accessible through the ISA bus. ISA probes are typically a bit more dangerous, as we have to write to I/O ports to do this. Do you want to scan the ISA bus? (YES/no): Probing for `National Semiconductor LM78' Trying address 0x0290... Failed! Probing for `National Semiconductor LM78-J' Trying address 0x0290... Failed! Probing for `National Semiconductor LM79' Trying address 0x0290... Failed! Probing for `Winbond W83781D' Trying address 0x0290... Failed! Probing for `Winbond W83782D' Trying address 0x0290... Failed! Probing for `Winbond W83627HF' Trying address 0x0290... Failed! Probing for `Winbond W83697HF' Trying address 0x0290... Failed! Probing for `Silicon Integrated Systems SIS5595' Trying general detect... Failed! Probing for `VIA Technologies VT82C686 Integrated Sensors' Trying general detect... Failed! Probing for `VIA Technologies VT8231 Integrated Sensors' Trying general detect... Failed! Probing for `ITE IT8705F / IT8712F / SiS 950' Trying address 0x0290... Failed! Probing for `IPMI BMC KCS' Trying address 0x0ca0... Failed! Probing for `IPMI BMC SMIC' Trying address 0x0ca8... Failed! Some Super I/O chips may also contain sensors. Super I/O probes are typically a bit more dangerous, as we have to write to I/O ports to do this. Do you want to scan for Super I/O sensors? (YES/no): Probing for `ITE 8702F Super IO Sensors' Failed! (0x5101) Probing for `ITE 8705F Super IO Sensors' Failed! (0x5101) Probing for `ITE 8712F Super IO Sensors' Failed! (0x5101) Probing for `Nat. Semi. PC87351 Super IO Fan Sensors' Failed! (0x51) Probing for `Nat. Semi. PC87360 Super IO Fan Sensors' Failed! (0x51) Probing for `Nat. Semi. PC87363 Super IO Fan Sensors' Failed! (0x51) Probing for `Nat. Semi. PC87364 Super IO Fan Sensors' Failed! (0x51) Probing for `Nat. Semi. PC87365 Super IO Sensors' Failed! (0x51) Probing for `Nat. Semi. PC87366 Super IO Sensors' Failed! (0x51) Probing for `Nat. Semi. PC87372 Super IO Fan Sensors' Failed! (0x51) Probing for `SMSC 47B27x Super IO Fan Sensors' Failed! (0x51) Probing for `SMSC 47M10x/13x Super IO Fan Sensors' Failed! (0x51) Probing for `SMSC 47M14x Super IO Fan Sensors' Failed! (0x51) Probing for `SMSC 47M15x/192 Super IO Fan Sensors' Failed! (0x51) Probing for `VT1211 Super IO Sensors' Failed! (0x51) Probing for `Winbond W83627HF Super IO Sensors' Failed! (0x51) Probing for `Winbond W83627THF Super IO Sensors' Failed! (0x51) Probing for `Winbond W83637HF Super IO Sensors' Failed! (0x51) Probing for `Winbond W83697HF Super IO Sensors' Failed! (0x51) Probing for `Winbond W83697UF Super IO PWM' Failed! (0x51) Sorry, no chips were detected. Either your sensors are not supported, or they are connected to an I2C bus adapter that we do not support. See doc/FAQ, doc/lm_sensors-FAQ.html, or http://www2.lm-sensors.nu/~lm78/cvs/lm_sensors2/doc/lm_sensors-FAQ.html (FAQ #4.24.3) for further information. If you find out what chips are on your board, see http://secure.netroedge.com/~lm78/newdrivers.html for driver status.
