> I got a new AMD tyan board and kernel 2.4.24 custom on debian, it > reads the same as the bios after modifing the sensors.conf file. I > hope you find the information usefull, even as I started with an older > package. I've added this information as comments in our default config file. Thanks! > Oh don't worry about the fans as they turn less than 2000Umin > and are not reported turning by the bios screen either ;-) You should try increasing fandivs from 2 to 4 (or more if needed). For free, a few comments about your sensors.conf file: > set in0_min 1.55 * 0.95 > set in0_max 1.75 * 1.05 Second line should read 1.55, not 1.75. > set in7_min 3.0 * 0.95 > set in7_max 3.0 * 1.10 First line should read * 0.90, not * 0.95. -- Jean Delvare http://www.ensicaen.ismra.fr/~delvare/
