ChangeSet 1.1474.98.28, 2004/01/19 15:07:53-08:00, greg at kroah.com
[PATCH] I2C: add I2C_DEBUG_BUS config option and convert the i2c bus drivers to use it.
This cleans up the mismatch of ways we could enable debugging messages.
drivers/i2c/Kconfig | 9 ++++++++
drivers/i2c/busses/i2c-ali1535.c | 5 +++-
drivers/i2c/busses/i2c-ali15x3.c | 5 +++-
drivers/i2c/busses/i2c-amd756.c | 5 +++-
drivers/i2c/busses/i2c-amd8111.c | 5 ++++
drivers/i2c/busses/i2c-elektor.c | 19 +++++++----------
drivers/i2c/busses/i2c-elv.c | 17 +++++++--------
drivers/i2c/busses/i2c-frodo.c | 5 ++++
drivers/i2c/busses/i2c-i801.c | 5 +++-
drivers/i2c/busses/i2c-i810.c | 5 ++++
drivers/i2c/busses/i2c-ibm_iic.c | 6 +++++
drivers/i2c/busses/i2c-iop3xx.c | 9 +++-----
drivers/i2c/busses/i2c-isa.c | 5 ++++
drivers/i2c/busses/i2c-ite.c | 24 ++++++++++------------
drivers/i2c/busses/i2c-keywest.c | 36 +++++++++++++++------------------
drivers/i2c/busses/i2c-nforce2.c | 5 ++++
drivers/i2c/busses/i2c-parport-light.c | 5 ++++
drivers/i2c/busses/i2c-parport.c | 7 +++++-
drivers/i2c/busses/i2c-philips-par.c | 7 +++++-
drivers/i2c/busses/i2c-piix4.c | 5 +++-
drivers/i2c/busses/i2c-prosavage.c | 5 ++++
drivers/i2c/busses/i2c-rpx.c | 7 +++++-
drivers/i2c/busses/i2c-savage4.c | 5 ++++
drivers/i2c/busses/i2c-sis5595.c | 10 +++++----
drivers/i2c/busses/i2c-sis630.c | 5 +++-
drivers/i2c/busses/i2c-sis96x.c | 5 +++-
drivers/i2c/busses/i2c-velleman.c | 12 +++++------
drivers/i2c/busses/i2c-via.c | 5 +++-
drivers/i2c/busses/i2c-viapro.c | 5 ++++
drivers/i2c/busses/i2c-voodoo3.c | 5 ++++
drivers/i2c/busses/scx200_acb.c | 9 ++++++--
drivers/i2c/busses/scx200_i2c.c | 10 ++++++---
32 files changed, 189 insertions(+), 83 deletions(-)
diff -Nru a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
--- a/drivers/i2c/Kconfig Mon Jan 19 15:27:44 2004
+++ b/drivers/i2c/Kconfig Mon Jan 19 15:27:44 2004
@@ -49,6 +49,15 @@
messages to the system log. Select this if you are having a
problem with I2C support and want to see more of what is going on.
+config I2C_DEBUG_BUS
+ bool "I2C Bus debugging messages"
+ depends on I2C
+ help
+ Say Y here if you want the I2C bus drivers to produce a bunch of
+ debug messages to the system log. Select this if you are having
+ a problem with I2C support and want to see more of what is going
+ on.
+
config I2C_DEBUG_CHIP
bool "I2C Chip debugging messages"
depends on I2C
diff -Nru a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c
--- a/drivers/i2c/busses/i2c-ali1535.c Mon Jan 19 15:27:44 2004
+++ b/drivers/i2c/busses/i2c-ali1535.c Mon Jan 19 15:27:44 2004
@@ -53,7 +53,10 @@
/* Note: we assume there can only be one ALI1535, with one SMBus interface */
-/* #define DEBUG 1 */
+#include <linux/config.h>
+#ifdef CONFIG_I2C_DEBUG_BUS
+#define DEBUG 1
+#endif
#include <linux/module.h>
#include <linux/pci.h>
diff -Nru a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c
--- a/drivers/i2c/busses/i2c-ali15x3.c Mon Jan 19 15:27:44 2004
+++ b/drivers/i2c/busses/i2c-ali15x3.c Mon Jan 19 15:27:44 2004
@@ -60,7 +60,10 @@
/* Note: we assume there can only be one ALI15X3, with one SMBus interface */
-/* #define DEBUG 1 */
+#include <linux/config.h>
+#ifdef CONFIG_I2C_DEBUG_BUS
+#define DEBUG 1
+#endif
#include <linux/module.h>
#include <linux/pci.h>
diff -Nru a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c
--- a/drivers/i2c/busses/i2c-amd756.c Mon Jan 19 15:27:44 2004
+++ b/drivers/i2c/busses/i2c-amd756.c Mon Jan 19 15:27:44 2004
@@ -37,7 +37,10 @@
Note: we assume there can only be one device, with one SMBus interface.
*/
-/* #define DEBUG 1 */
+#include <linux/config.h>
+#ifdef CONFIG_I2C_DEBUG_BUS
+#define DEBUG 1
+#endif
#include <linux/module.h>
#include <linux/pci.h>
diff -Nru a/drivers/i2c/busses/i2c-amd8111.c b/drivers/i2c/busses/i2c-amd8111.c
--- a/drivers/i2c/busses/i2c-amd8111.c Mon Jan 19 15:27:44 2004
+++ b/drivers/i2c/busses/i2c-amd8111.c Mon Jan 19 15:27:44 2004
@@ -8,6 +8,11 @@
* the Free Software Foundation version 2.
*/
+#include <linux/config.h>
+#ifdef CONFIG_I2C_DEBUG_BUS
+#define DEBUG 1
+#endif
+
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/kernel.h>
diff -Nru a/drivers/i2c/busses/i2c-elektor.c b/drivers/i2c/busses/i2c-elektor.c
--- a/drivers/i2c/busses/i2c-elektor.c Mon Jan 19 15:27:44 2004
+++ b/drivers/i2c/busses/i2c-elektor.c Mon Jan 19 15:27:44 2004
@@ -25,6 +25,11 @@
/* Partialy rewriten by Oleg I. Vdovikin for mmapped support of
for Alpha Processor Inc. UP-2000(+) boards */
+#include <linux/config.h>
+#ifdef CONFIG_I2C_DEBUG_BUS
+#define DEBUG 1
+#endif
+
#include <linux/kernel.h>
#include <linux/ioport.h>
#include <linux/module.h>
@@ -50,7 +55,6 @@
static int clock = 0x1c;
static int own = 0x55;
static int mmapped;
-static int i2c_debug;
/* vdovikin: removed static struct i2c_pcf_isa gpi; code -
this module in real supports only one device, due to missing arguments
@@ -60,12 +64,6 @@
static wait_queue_head_t pcf_wait;
static int pcf_pending;
-/* ----- global defines ----------------------------------------------- */
-#define DEB(x) if (i2c_debug>=1) x
-#define DEB2(x) if (i2c_debug>=2) x
-#define DEB3(x) if (i2c_debug>=3) x
-#define DEBE(x) x /* error messages */
-
/* ----- local functions ---------------------------------------------- */
static void pcf_isa_setbyte(void *data, int ctl, int val)
@@ -77,7 +75,7 @@
val |= I2C_PCF_ENI;
}
- DEB3(printk(KERN_DEBUG "i2c-elektor: Write 0x%X 0x%02X\n", address, val & 255));
+ pr_debug("i2c-elektor: Write 0x%X 0x%02X\n", address, val & 255);
switch (mmapped) {
case 0: /* regular I/O */
@@ -98,7 +96,7 @@
int address = ctl ? (base + 1) : base;
int val = mmapped ? readb(address) : inb(address);
- DEB3(printk(KERN_DEBUG "i2c-elektor: Read 0x%X 0x%02X\n", address, val));
+ pr_debug("i2c-elektor: Read 0x%X 0x%02X\n", address, val);
return (val);
}
@@ -196,7 +194,7 @@
/* yeap, we've found cypress, let's check config */
if (!pci_read_config_byte(cy693_dev, 0x47, &config)) {
- DEB3(printk(KERN_DEBUG "i2c-elektor: found cy82c693, config register 0x47 = 0x%02x.\n", config));
+ pr_debug("i2c-elektor: found cy82c693, config register 0x47 = 0x%02x.\n", config);
/* UP2000 board has this register set to 0xe1,
but the most significant bit as seems can be
@@ -280,7 +278,6 @@
MODULE_PARM(clock, "i");
MODULE_PARM(own, "i");
MODULE_PARM(mmapped, "i");
-MODULE_PARM(i2c_debug, "i");
module_init(i2c_pcfisa_init);
module_exit(i2c_pcfisa_exit);
diff -Nru a/drivers/i2c/busses/i2c-elv.c b/drivers/i2c/busses/i2c-elv.c
--- a/drivers/i2c/busses/i2c-elv.c Mon Jan 19 15:27:44 2004
+++ b/drivers/i2c/busses/i2c-elv.c Mon Jan 19 15:27:44 2004
@@ -21,6 +21,11 @@
/* With some changes from Ky?sti M?lkki <kmalkki at cc.hut.fi> and even
Frodo Looijaard <frodol at dds.nl> */
+#include <linux/config.h>
+#ifdef CONFIG_I2C_DEBUG_BUS
+#define DEBUG 1
+#endif
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/delay.h>
@@ -36,12 +41,6 @@
static int base=0;
static unsigned char port_data = 0;
-/* ----- global defines ----------------------------------------------- */
-#define DEB(x) /* should be reasonable open, close &c. */
-#define DEB2(x) /* low level debugging - very slow */
-#define DEBE(x) x /* error messages */
-#define DEBINIT(x) x /* detection status messages */
-
/* --- Convenience defines for the parallel port: */
#define BASE (unsigned int)(data)
#define DATA BASE /* Centronics data port */
@@ -89,7 +88,7 @@
return -ENODEV;
if (inb(base+1) & 0x80) { /* BUSY should be high */
- DEBINIT(printk(KERN_DEBUG "i2c-elv.o: Busy was low.\n"));
+ pr_debug("i2c-elv: Busy was low.\n");
goto fail;
}
@@ -97,7 +96,7 @@
udelay(400);
if (!(inb(base+1) && 0x10)) {
outb(0x04,base+2);
- DEBINIT(printk(KERN_DEBUG "i2c-elv.o: Select was high.\n"));
+ pr_debug("i2c-elv: Select was high.\n");
goto fail;
}
@@ -153,7 +152,7 @@
return -ENODEV;
}
}
- printk(KERN_DEBUG "i2c-elv.o: found device at %#x.\n",base);
+ pr_debug("i2c-elv: found device at %#x.\n",base);
return 0;
}
diff -Nru a/drivers/i2c/busses/i2c-frodo.c b/drivers/i2c/busses/i2c-frodo.c
--- a/drivers/i2c/busses/i2c-frodo.c Mon Jan 19 15:27:44 2004
+++ b/drivers/i2c/busses/i2c-frodo.c Mon Jan 19 15:27:44 2004
@@ -12,6 +12,11 @@
* version 2 as published by the Free Software Foundation.
*/
+#include <linux/config.h>
+#ifdef CONFIG_I2C_DEBUG_BUS
+#define DEBUG 1
+#endif
+
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
diff -Nru a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
--- a/drivers/i2c/busses/i2c-i801.c Mon Jan 19 15:27:44 2004
+++ b/drivers/i2c/busses/i2c-i801.c Mon Jan 19 15:27:44 2004
@@ -38,7 +38,10 @@
/* Note: we assume there can only be one I801, with one SMBus interface */
-/* #define DEBUG 1 */
+#include <linux/config.h>
+#ifdef CONFIG_I2C_DEBUG_BUS
+#define DEBUG 1
+#endif
#include <linux/module.h>
#include <linux/pci.h>
diff -Nru a/drivers/i2c/busses/i2c-i810.c b/drivers/i2c/busses/i2c-i810.c
--- a/drivers/i2c/busses/i2c-i810.c Mon Jan 19 15:27:44 2004
+++ b/drivers/i2c/busses/i2c-i810.c Mon Jan 19 15:27:44 2004
@@ -34,6 +34,11 @@
i815 1132
*/
+#include <linux/config.h>
+#ifdef CONFIG_I2C_DEBUG_BUS
+#define DEBUG 1
+#endif
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
diff -Nru a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c
--- a/drivers/i2c/busses/i2c-ibm_iic.c Mon Jan 19 15:27:44 2004
+++ b/drivers/i2c/busses/i2c-ibm_iic.c Mon Jan 19 15:27:44 2004
@@ -27,6 +27,12 @@
* option) any later version.
*
*/
+
+#include <linux/config.h>
+#ifdef CONFIG_I2C_DEBUG_BUS
+#define DEBUG 1
+#endif
+
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/ioport.h>
diff -Nru a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c
--- a/drivers/i2c/busses/i2c-iop3xx.c Mon Jan 19 15:27:44 2004
+++ b/drivers/i2c/busses/i2c-iop3xx.c Mon Jan 19 15:27:44 2004
@@ -31,6 +31,10 @@
---------------------------------------------------------------------------*/
+#include <linux/config.h>
+#ifdef CONFIG_I2C_DEBUG_BUS
+#define DEBUG 1
+#endif
#include <linux/interrupt.h>
#include <linux/kernel.h>
@@ -529,8 +533,3 @@
MODULE_AUTHOR("D-TACQ Solutions Ltd <www.d-tacq.com>");
MODULE_DESCRIPTION("IOP3xx iic algorithm and driver");
MODULE_LICENSE("GPL");
-
-MODULE_PARM(i2c_debug,"i");
-
-MODULE_PARM_DESC(i2c_debug, "debug level - 0 off; 1 normal; 2,3 more verbose; 9 iic-protocol");
-
diff -Nru a/drivers/i2c/busses/i2c-isa.c b/drivers/i2c/busses/i2c-isa.c
--- a/drivers/i2c/busses/i2c-isa.c Mon Jan 19 15:27:44 2004
+++ b/drivers/i2c/busses/i2c-isa.c Mon Jan 19 15:27:44 2004
@@ -24,6 +24,11 @@
the SMBus and the ISA bus very much easier. See lm78.c for an example
of this. */
+#include <linux/config.h>
+#ifdef CONFIG_I2C_DEBUG_BUS
+#define DEBUG 1
+#endif
+
#include <linux/init.h>
#include <linux/module.h>
#include <linux/kernel.h>
diff -Nru a/drivers/i2c/busses/i2c-ite.c b/drivers/i2c/busses/i2c-ite.c
--- a/drivers/i2c/busses/i2c-ite.c Mon Jan 19 15:27:44 2004
+++ b/drivers/i2c/busses/i2c-ite.c Mon Jan 19 15:27:44 2004
@@ -33,6 +33,11 @@
/* With some changes from Ky?sti M?lkki <kmalkki at cc.hut.fi> and even
Frodo Looijaard <frodol at dds.nl> */
+#include <linux/config.h>
+#ifdef CONFIG_I2C_DEBUG_BUS
+#define DEBUG 1
+#endif
+
#include <linux/kernel.h>
#include <linux/ioport.h>
#include <linux/module.h>
@@ -58,26 +63,21 @@
static int clock = 0;
static int own = 0;
-static int i2c_debug=0;
static struct iic_ite gpi;
static wait_queue_head_t iic_wait;
static int iic_pending;
-/* ----- global defines ----------------------------------------------- */
-#define DEB(x) if (i2c_debug>=1) x
-#define DEB2(x) if (i2c_debug>=2) x
-#define DEB3(x) if (i2c_debug>=3) x
-#define DEBE(x) x /* error messages */
-
-
/* ----- local functions ---------------------------------------------- */
static void iic_ite_setiic(void *data, int ctl, short val)
{
unsigned long j = jiffies + 10;
- DEB3(printk(" Write 0x%02x to 0x%x\n",(unsigned short)val, ctl&0xff));
- DEB3({while (time_before(jiffies, j)) schedule();})
+ pr_debug(" Write 0x%02x to 0x%x\n",(unsigned short)val, ctl&0xff);
+#ifdef DEBUG
+ while (time_before(jiffies, j))
+ schedule();
+#endif
outw(val,ctl);
}
@@ -86,7 +86,7 @@
short val;
val = inw(ctl);
- DEB3(printk("Read 0x%02x from 0x%x\n",(unsigned short)val, ctl&0xff));
+ pr_debug("Read 0x%02x from 0x%x\n",(unsigned short)val, ctl&0xff);
return (val);
}
@@ -145,7 +145,6 @@
iic_pending = 1;
- DEB2(printk("iic_ite_handler: in interrupt handler\n"));
wake_up_interruptible(&iic_wait);
}
@@ -263,7 +262,6 @@
MODULE_PARM(irq, "i");
MODULE_PARM(clock, "i");
MODULE_PARM(own, "i");
-MODULE_PARM(i2c_debug,"i");
/* Called when module is loaded or when kernel is initialized.
diff -Nru a/drivers/i2c/busses/i2c-keywest.c b/drivers/i2c/busses/i2c-keywest.c
--- a/drivers/i2c/busses/i2c-keywest.c Mon Jan 19 15:27:44 2004
+++ b/drivers/i2c/busses/i2c-keywest.c Mon Jan 19 15:27:44 2004
@@ -43,6 +43,11 @@
sound driver to be happy
*/
+#include <linux/config.h>
+#ifdef CONFIG_I2C_DEBUG_BUS
+#define DEBUG 1
+#endif
+
#include <linux/module.h>
#include <linux/config.h>
#include <linux/kernel.h>
@@ -65,20 +70,13 @@
#include "i2c-keywest.h"
-#define DBG(x...) do {\
- if (debug > 0) \
- printk(KERN_DEBUG "KW:" x); \
- } while(0)
-
MODULE_AUTHOR("Benjamin Herrenschmidt <benh at kernel.crashing.org>");
MODULE_DESCRIPTION("I2C driver for Apple's Keywest");
MODULE_LICENSE("GPL");
MODULE_PARM(probe, "i");
-MODULE_PARM(debug, "i");
-int probe = 0;
-int debug = 0;
+static int probe = 0;
static void
do_stop(struct keywest_iface* iface, int result)
@@ -95,7 +93,7 @@
int ack;
int rearm_timer = 1;
- DBG("handle_interrupt(), got: %x, status: %x, state: %d\n",
+ pr_debug("handle_interrupt(), got: %x, status: %x, state: %d\n",
isr, read_reg(reg_status), iface->state);
if (isr == 0 && iface->state != state_stop) {
do_stop(iface, -1);
@@ -112,7 +110,7 @@
break;
}
ack = read_reg(reg_status);
- DBG("ack on set address: %x\n", ack);
+ pr_debug("ack on set address: %x\n", ack);
if ((ack & KW_I2C_STAT_LAST_AAK) == 0) {
do_stop(iface, -1);
break;
@@ -127,7 +125,7 @@
| KW_I2C_CTL_AAK);
} else {
iface->state = state_write;
- DBG("write byte: %x\n", *(iface->data));
+ pr_debug("write byte: %x\n", *(iface->data));
write_reg(reg_data, *(iface->data++));
iface->datalen--;
}
@@ -139,7 +137,7 @@
break;
}
*(iface->data++) = read_reg(reg_data);
- DBG("read byte: %x\n", *(iface->data-1));
+ pr_debug("read byte: %x\n", *(iface->data-1));
iface->datalen--;
if (iface->datalen == 0)
iface->state = state_stop;
@@ -153,13 +151,13 @@
}
/* Check ack status */
ack = read_reg(reg_status);
- DBG("ack on data write: %x\n", ack);
+ pr_debug("ack on data write: %x\n", ack);
if ((ack & KW_I2C_STAT_LAST_AAK) == 0) {
do_stop(iface, -1);
break;
}
if (iface->datalen) {
- DBG("write byte: %x\n", *(iface->data));
+ pr_debug("write byte: %x\n", *(iface->data));
write_reg(reg_data, *(iface->data++));
iface->datalen--;
} else
@@ -203,7 +201,7 @@
{
struct keywest_iface *iface = (struct keywest_iface *)data;
- DBG("timeout !\n");
+ pr_debug("timeout !\n");
spin_lock_irq(&iface->lock);
if (handle_interrupt(iface, read_reg(reg_isr)))
mod_timer(&iface->timeout_timer, jiffies + POLL_TIMEOUT);
@@ -271,7 +269,7 @@
down(&iface->sem);
- DBG("chan: %d, addr: 0x%x, transfer len: %d, read: %d\n",
+ pr_debug("chan: %d, addr: 0x%x, transfer len: %d, read: %d\n",
chan->chan_no, addr, len, read_write == I2C_SMBUS_READ);
iface->data = buffer;
@@ -306,7 +304,7 @@
wait_for_completion(&iface->complete);
rc = iface->result;
- DBG("transfer done, result: %d\n", rc);
+ pr_debug("transfer done, result: %d\n", rc);
if (rc == 0 && size == I2C_SMBUS_WORD_DATA && read_write == I2C_SMBUS_READ)
data->word = le16_to_cpu(cur_word);
@@ -348,7 +346,7 @@
rc = -EINVAL;
break;
}
- DBG("xfer: chan: %d, doing %s %d bytes to 0x%02x - %d of %d messages\n",
+ pr_debug("xfer: chan: %d, doing %s %d bytes to 0x%02x - %d of %d messages\n",
chan->chan_no,
pmsg->flags & I2C_M_RD ? "read" : "write",
pmsg->len, addr, i, num);
@@ -388,7 +386,7 @@
rc = iface->result;
if (rc == 0)
completed++;
- DBG("transfer done, result: %d\n", rc);
+ pr_debug("transfer done, result: %d\n", rc);
}
/* Release sem */
diff -Nru a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c
--- a/drivers/i2c/busses/i2c-nforce2.c Mon Jan 19 15:27:44 2004
+++ b/drivers/i2c/busses/i2c-nforce2.c Mon Jan 19 15:27:44 2004
@@ -32,6 +32,11 @@
/* Note: we assume there can only be one nForce2, with two SMBus interfaces */
+#include <linux/config.h>
+#ifdef CONFIG_I2C_DEBUG_BUS
+#define DEBUG 1
+#endif
+
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/kernel.h>
diff -Nru a/drivers/i2c/busses/i2c-parport-light.c b/drivers/i2c/busses/i2c-parport-light.c
--- a/drivers/i2c/busses/i2c-parport-light.c Mon Jan 19 15:27:44 2004
+++ b/drivers/i2c/busses/i2c-parport-light.c Mon Jan 19 15:27:44 2004
@@ -24,6 +24,11 @@
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* ------------------------------------------------------------------------ */
+#include <linux/config.h>
+#ifdef CONFIG_I2C_DEBUG_BUS
+#define DEBUG 1
+#endif
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
diff -Nru a/drivers/i2c/busses/i2c-parport.c b/drivers/i2c/busses/i2c-parport.c
--- a/drivers/i2c/busses/i2c-parport.c Mon Jan 19 15:27:44 2004
+++ b/drivers/i2c/busses/i2c-parport.c Mon Jan 19 15:27:44 2004
@@ -24,6 +24,11 @@
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* ------------------------------------------------------------------------ */
+#include <linux/config.h>
+#ifdef CONFIG_I2C_DEBUG_BUS
+#define DEBUG 1
+#endif
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
@@ -162,7 +167,7 @@
}
memset(adapter, 0x00, sizeof(struct i2c_par));
- printk(KERN_DEBUG "i2c-parport: attaching to %s\n", port->name);
+ pr_debug("i2c-parport: attaching to %s\n", port->name);
adapter->pdev = parport_register_device(port, "i2c-parport",
NULL, NULL, NULL, PARPORT_FLAG_EXCL, NULL);
if (!adapter->pdev) {
diff -Nru a/drivers/i2c/busses/i2c-philips-par.c b/drivers/i2c/busses/i2c-philips-par.c
--- a/drivers/i2c/busses/i2c-philips-par.c Mon Jan 19 15:27:44 2004
+++ b/drivers/i2c/busses/i2c-philips-par.c Mon Jan 19 15:27:44 2004
@@ -23,6 +23,11 @@
/* $Id: i2c-philips-par.c,v 1.29 2003/01/21 08:08:16 kmalkki Exp $ */
+#include <linux/config.h>
+#ifdef CONFIG_I2C_DEBUG_BUS
+#define DEBUG 1
+#endif
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
@@ -158,7 +163,7 @@
}
memset (adapter, 0x00, sizeof(struct i2c_par));
- /* printk(KERN_DEBUG "i2c-philips-par.o: attaching to %s\n", port->name); */
+ /* pr_debug("i2c-philips-par: attaching to %s\n", port->name); */
adapter->pdev = parport_register_device(port, "i2c-philips-par",
NULL, NULL, NULL,
diff -Nru a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
--- a/drivers/i2c/busses/i2c-piix4.c Mon Jan 19 15:27:44 2004
+++ b/drivers/i2c/busses/i2c-piix4.c Mon Jan 19 15:27:44 2004
@@ -28,7 +28,10 @@
Note: we assume there can only be one device, with one SMBus interface.
*/
-/* #define DEBUG 1 */
+#include <linux/config.h>
+#ifdef CONFIG_I2C_DEBUG_BUS
+#define DEBUG 1
+#endif
#include <linux/module.h>
#include <linux/moduleparam.h>
diff -Nru a/drivers/i2c/busses/i2c-prosavage.c b/drivers/i2c/busses/i2c-prosavage.c
--- a/drivers/i2c/busses/i2c-prosavage.c Mon Jan 19 15:27:44 2004
+++ b/drivers/i2c/busses/i2c-prosavage.c Mon Jan 19 15:27:44 2004
@@ -54,6 +54,11 @@
* (Additional documentation needed :(
*/
+#include <linux/config.h>
+#ifdef CONFIG_I2C_DEBUG_BUS
+#define DEBUG 1
+#endif
+
#include <linux/module.h>
#include <linux/init.h>
#include <linux/pci.h>
diff -Nru a/drivers/i2c/busses/i2c-rpx.c b/drivers/i2c/busses/i2c-rpx.c
--- a/drivers/i2c/busses/i2c-rpx.c Mon Jan 19 15:27:44 2004
+++ b/drivers/i2c/busses/i2c-rpx.c Mon Jan 19 15:27:44 2004
@@ -11,6 +11,11 @@
* changed to eliminate RPXLite references.
*/
+#include <linux/config.h>
+#ifdef CONFIG_I2C_DEBUG_BUS
+#define DEBUG 1
+#endif
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
@@ -82,7 +87,7 @@
rpx_iic_init(&rpx_data);
if (i2c_8xx_add_bus(&rpx_ops) < 0) {
- printk("i2c-rpx: Unable to register with I2C\n");
+ printk(KERN_ERR "i2c-rpx: Unable to register with I2C\n");
return -ENODEV;
}
diff -Nru a/drivers/i2c/busses/i2c-savage4.c b/drivers/i2c/busses/i2c-savage4.c
--- a/drivers/i2c/busses/i2c-savage4.c Mon Jan 19 15:27:44 2004
+++ b/drivers/i2c/busses/i2c-savage4.c Mon Jan 19 15:27:44 2004
@@ -29,6 +29,11 @@
it easier to add later.
*/
+#include <linux/config.h>
+#ifdef CONFIG_I2C_DEBUG_BUS
+#define DEBUG 1
+#endif
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
diff -Nru a/drivers/i2c/busses/i2c-sis5595.c b/drivers/i2c/busses/i2c-sis5595.c
--- a/drivers/i2c/busses/i2c-sis5595.c Mon Jan 19 15:27:44 2004
+++ b/drivers/i2c/busses/i2c-sis5595.c Mon Jan 19 15:27:44 2004
@@ -55,7 +55,10 @@
* Add adapter resets
*/
-/* #define DEBUG 1 */
+#include <linux/config.h>
+#ifdef CONFIG_I2C_DEBUG_BUS
+#define DEBUG 1
+#endif
#include <linux/kernel.h>
#include <linux/module.h>
@@ -311,13 +314,12 @@
break;
/*
case I2C_SMBUS_BLOCK_DATA:
- printk("sis5595.o: Block data not yet implemented!\n");
+ printk(KERN_WARNING "sis5595.o: Block data not yet implemented!\n");
return -1;
break;
*/
default:
- printk
- (KERN_WARNING "sis5595.o: Unsupported transaction %d\n", size);
+ printk(KERN_WARNING "sis5595.o: Unsupported transaction %d\n", size);
return -1;
}
diff -Nru a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c
--- a/drivers/i2c/busses/i2c-sis630.c Mon Jan 19 15:27:44 2004
+++ b/drivers/i2c/busses/i2c-sis630.c Mon Jan 19 15:27:44 2004
@@ -48,7 +48,10 @@
Note: we assume there can only be one device, with one SMBus interface.
*/
-/* #define DEBUG 1 */
+#include <linux/config.h>
+#ifdef CONFIG_I2C_DEBUG_BUS
+#define DEBUG 1
+#endif
#include <linux/kernel.h>
#include <linux/module.h>
diff -Nru a/drivers/i2c/busses/i2c-sis96x.c b/drivers/i2c/busses/i2c-sis96x.c
--- a/drivers/i2c/busses/i2c-sis96x.c Mon Jan 19 15:27:44 2004
+++ b/drivers/i2c/busses/i2c-sis96x.c Mon Jan 19 15:27:44 2004
@@ -32,7 +32,10 @@
We assume there can only be one SiS96x with one SMBus interface.
*/
-/* #define DEBUG */
+#include <linux/config.h>
+#ifdef CONFIG_I2C_DEBUG_BUS
+#define DEBUG 1
+#endif
#include <linux/module.h>
#include <linux/pci.h>
diff -Nru a/drivers/i2c/busses/i2c-velleman.c b/drivers/i2c/busses/i2c-velleman.c
--- a/drivers/i2c/busses/i2c-velleman.c Mon Jan 19 15:27:44 2004
+++ b/drivers/i2c/busses/i2c-velleman.c Mon Jan 19 15:27:44 2004
@@ -20,6 +20,11 @@
/* $Id: i2c-velleman.c,v 1.29 2003/01/21 08:08:16 kmalkki Exp $ */
+#include <linux/config.h>
+#ifdef CONFIG_I2C_DEBUG_BUS
+#define DEBUG 1
+#endif
+
#include <linux/kernel.h>
#include <linux/ioport.h>
#include <linux/module.h>
@@ -29,11 +34,6 @@
#include <linux/i2c-algo-bit.h>
#include <asm/io.h>
-/* ----- global defines ----------------------------------------------- */
-#define DEB(x) /* should be reasonable open, close &c. */
-#define DEB2(x) /* low level debugging - very slow */
-#define DEBE(x) x /* error messages */
-
/* Pin Port Inverted name */
#define I2C_SDA 0x02 /* ctrl bit 1 (inv) */
#define I2C_SCL 0x08 /* ctrl bit 3 (inv) */
@@ -140,7 +140,7 @@
return -ENODEV;
}
}
- printk(KERN_DEBUG "i2c-velleman: found device at %#x.\n",base);
+ pr_debug("i2c-velleman: found device at %#x.\n",base);
return 0;
}
diff -Nru a/drivers/i2c/busses/i2c-via.c b/drivers/i2c/busses/i2c-via.c
--- a/drivers/i2c/busses/i2c-via.c Mon Jan 19 15:27:44 2004
+++ b/drivers/i2c/busses/i2c-via.c Mon Jan 19 15:27:44 2004
@@ -21,7 +21,10 @@
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-/* #define DEBUG */
+#include <linux/config.h>
+#ifdef CONFIG_I2C_DEBUG_BUS
+#define DEBUG 1
+#endif
#include <linux/kernel.h>
#include <linux/module.h>
diff -Nru a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c
--- a/drivers/i2c/busses/i2c-viapro.c Mon Jan 19 15:27:44 2004
+++ b/drivers/i2c/busses/i2c-viapro.c Mon Jan 19 15:27:44 2004
@@ -33,6 +33,11 @@
Note: we assume there can only be one device, with one SMBus interface.
*/
+#include <linux/config.h>
+#ifdef CONFIG_I2C_DEBUG_BUS
+#define DEBUG 1
+#endif
+
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/kernel.h>
diff -Nru a/drivers/i2c/busses/i2c-voodoo3.c b/drivers/i2c/busses/i2c-voodoo3.c
--- a/drivers/i2c/busses/i2c-voodoo3.c Mon Jan 19 15:27:44 2004
+++ b/drivers/i2c/busses/i2c-voodoo3.c Mon Jan 19 15:27:44 2004
@@ -27,6 +27,11 @@
/* This interfaces to the I2C bus of the Voodoo3 to gain access to
the BT869 and possibly other I2C devices. */
+#include <linux/config.h>
+#ifdef CONFIG_I2C_DEBUG_BUS
+#define DEBUG 1
+#endif
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
diff -Nru a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c
--- a/drivers/i2c/busses/scx200_acb.c Mon Jan 19 15:27:44 2004
+++ b/drivers/i2c/busses/scx200_acb.c Mon Jan 19 15:27:44 2004
@@ -25,6 +25,11 @@
*/
#include <linux/config.h>
+#ifdef CONFIG_I2C_DEBUG_BUS
+#define DEBUG 1
+#endif
+
+#include <linux/config.h>
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/kernel.h>
@@ -373,7 +378,7 @@
data->word = le16_to_cpu(cur_word);
#ifdef DEBUG
- printk(KERN_DEBUG NAME ": transfer done, result: %d", rc);
+ DBG(": transfer done, result: %d", rc);
if (buffer) {
int i;
printk(" data:");
@@ -505,7 +510,7 @@
int i;
int rc;
- printk(KERN_DEBUG NAME ": NatSemi SCx200 ACCESS.bus Driver\n");
+ pr_debug(NAME ": NatSemi SCx200 ACCESS.bus Driver\n");
/* Verify that this really is a SCx200 processor */
if (pci_find_device(PCI_VENDOR_ID_NS,
diff -Nru a/drivers/i2c/busses/scx200_i2c.c b/drivers/i2c/busses/scx200_i2c.c
--- a/drivers/i2c/busses/scx200_i2c.c Mon Jan 19 15:27:44 2004
+++ b/drivers/i2c/busses/scx200_i2c.c Mon Jan 19 15:27:44 2004
@@ -22,6 +22,11 @@
*/
#include <linux/config.h>
+#ifdef CONFIG_I2C_DEBUG_BUS
+#define DEBUG 1
+#endif
+
+#include <linux/config.h>
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/kernel.h>
@@ -88,15 +93,14 @@
int scx200_i2c_init(void)
{
- printk(KERN_DEBUG NAME ": NatSemi SCx200 I2C Driver\n");
+ pr_debug(NAME ": NatSemi SCx200 I2C Driver\n");
if (!scx200_gpio_present()) {
printk(KERN_ERR NAME ": no SCx200 gpio pins available\n");
return -ENODEV;
}
- printk(KERN_DEBUG NAME ": SCL=GPIO%02u, SDA=GPIO%02u\n",
- scl, sda);
+ pr_debug(NAME ": SCL=GPIO%02u, SDA=GPIO%02u\n", scl, sda);
if (scl == -1 || sda == -1 || scl == sda) {
printk(KERN_ERR NAME ": scl and sda must be specified\n");
