ChangeSet 1.1496.8.39, 2003/12/30 12:10:24-08:00, khali at linux-fr.org [PATCH] I2C: velleman typo This patch replaces "K9000" with "K8000" everywhere (5 occurences) since it seems that the "K9000" was a typo in the first place. It also rewords the i2c-velleman doc. I have fixed it in our CVS repository too, and have been sending a similar patch to Marcelo for Linux 2.4. Documentation/i2c/i2c-velleman | 16 ++++++---------- Documentation/i2c/summary | 2 +- drivers/i2c/busses/Kconfig | 4 ++-- drivers/i2c/busses/i2c-velleman.c | 2 +- 4 files changed, 10 insertions(+), 14 deletions(-) diff -Nru a/Documentation/i2c/i2c-velleman b/Documentation/i2c/i2c-velleman --- a/Documentation/i2c/i2c-velleman Tue Dec 30 12:28:12 2003 +++ b/Documentation/i2c/i2c-velleman Tue Dec 30 12:28:12 2003 @@ -1,6 +1,6 @@ i2c-velleman driver ------------------- -This is a driver for i2c-hw access for Velleman K9000 and other adapters. +This is a driver for i2c-hw access for Velleman K8000 and other adapters. Useful links ------------ @@ -10,18 +10,14 @@ Velleman K8000 Howto: http://howto.htlw16.ac.at/k8000-howto.html - K8000 and K8005 libraries ------------------------- -The project has lead to new libs for the Velleman K8000 and K8005.. +The project has lead to new libs for the Velleman K8000 and K8005: LIBK8000 v1.99.1 and LIBK8005 v0.21 -With these libs you can control the K8000 and K8005 with the original -simple commands which are in the original Velleman software. -Like SetIOchannel, ReadADchannel, SendStepCCWFull and many more. -Via i2c kernel device /dev/velleman +With these libs, you can control the K8000 interface card and the K8005 +stepper motor card with the simple commands which are in the original +Velleman software, like SetIOchannel, ReadADchannel, SendStepCCWFull and +many more, using /dev/velleman. The libs can be found on http://groups.yahoo.com/group/k8000/files/linux/ - -The Velleman K8000 interface card on http://www.velleman.be/kits/k8000.htm -The Velleman K8005 steppermotorcard on http://www.velleman.be/kits/k8005.htm diff -Nru a/Documentation/i2c/summary b/Documentation/i2c/summary --- a/Documentation/i2c/summary Tue Dec 30 12:28:12 2003 +++ b/Documentation/i2c/summary Tue Dec 30 12:28:12 2003 @@ -71,5 +71,5 @@ i2c-adap-ibm_ocp: IBM 4xx processor I2C device (uses i2c-algo-ibm_ocp) (NOT BUILT BY DEFAULT) i2c-pport: Primitive parallel port adapter (uses i2c-algo-bit) i2c-rpx: RPX board Motorola 8xx I2C device (uses i2c-algo-8xx) (NOT BUILT BY DEFAULT) -i2c-velleman: Velleman K9000 parallel port adapter (uses i2c-algo-bit) +i2c-velleman: Velleman K8000 parallel port adapter (uses i2c-algo-bit) diff -Nru a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig --- a/drivers/i2c/busses/Kconfig Tue Dec 30 12:28:12 2003 +++ b/drivers/i2c/busses/Kconfig Tue Dec 30 12:28:12 2003 @@ -276,10 +276,10 @@ will be called i2c-sis96x. config I2C_VELLEMAN - tristate "Velleman K9000 adapter" + tristate "Velleman K8000 adapter" depends on I2C_ALGOBIT && ISA help - This supports the Velleman K9000 parallel-port I2C adapter. Say Y + This supports the Velleman K8000 parallel-port I2C adapter. Say Y if you own such an adapter. This support is also available as a module. If so, the module diff -Nru a/drivers/i2c/busses/i2c-velleman.c b/drivers/i2c/busses/i2c-velleman.c --- a/drivers/i2c/busses/i2c-velleman.c Tue Dec 30 12:28:12 2003 +++ b/drivers/i2c/busses/i2c-velleman.c Tue Dec 30 12:28:12 2003 @@ -1,5 +1,5 @@ /* ------------------------------------------------------------------------- */ -/* i2c-velleman.c i2c-hw access for Velleman K9000 adapters */ +/* i2c-velleman.c i2c-hw access for Velleman K8000 adapters */ /* ------------------------------------------------------------------------- */ /* Copyright (C) 1995-96, 2000 Simon G. Vogl
