And finally, this patch adds documentation for the i2c-velleman driver, and also fixes a typo (the device is refered to as K9000 in many places while its real name is actually K8000). I'll send a similar patch to Greg KH for Linux 2.6 in a few days. Thanks! diff -ruN linux-2.4.24-pre2/Documentation/Configure.help linux-2.4.24-pre2-k5/Documentation/Configure.help --- linux-2.4.24-pre2/Documentation/Configure.help Tue Dec 23 22:19:41 2003 +++ linux-2.4.24-pre2-k5/Documentation/Configure.help Wed Dec 24 22:25:24 2003 @@ -19052,9 +19052,9 @@ <file:Documentation/modules.txt>. The module will be called i2c-elv.o. -Velleman K9000 adapter +Velleman K8000 adapter CONFIG_I2C_VELLEMAN - This supports the Velleman K9000 parallel-port I2C adapter. Say Y + This supports the Velleman K8000 parallel-port I2C adapter. Say Y if you own such an adapter. This driver is also available as a module. If you want to compile diff -ruN linux-2.4.24-pre2/Documentation/i2c/i2c-velleman linux-2.4.24-pre2-k5/Documentation/i2c/i2c-velleman --- linux-2.4.24-pre2/Documentation/i2c/i2c-velleman Thu Jan 1 01:00:00 1970 +++ linux-2.4.24-pre2-k5/Documentation/i2c/i2c-velleman Wed Dec 24 22:25:24 2003 @@ -0,0 +1,23 @@ +i2c-velleman driver +------------------- +This is a driver for i2c-hw access for Velleman K8000 and other adapters. + +Useful links +------------ +Velleman: + http://www.velleman.be/ + +Velleman K8000 Howto: + http://howto.htlw16.ac.at/k8000-howto.html + +K8000 and K8005 libraries +------------------------- +The project has lead to new libs for the Velleman K8000 and K8005: +LIBK8000 v1.99.1 and LIBK8005 v0.21 + +With these libs, you can control the K8000 interface card and the K8005 +stepper motor card with the simple commands which are in the original +Velleman software, like SetIOchannel, ReadADchannel, SendStepCCWFull and +many more, using /dev/velleman. + +The libs can be found on http://groups.yahoo.com/group/k8000/files/linux/ diff -ruN linux-2.4.24-pre2/Documentation/i2c/summary linux-2.4.24-pre2-k5/Documentation/i2c/summary --- linux-2.4.24-pre2/Documentation/i2c/summary Mon Dec 22 21:50:09 2003 +++ linux-2.4.24-pre2-k5/Documentation/i2c/summary Wed Dec 24 22:25:24 2003 @@ -71,5 +71,5 @@ i2c-ppc405: IBM 405xx processor I2C device (uses i2c-algo-ppc405) (NOT BUILT BY DEFAULT) i2c-pport: Primitive parallel port adapter (uses i2c-algo-bit) i2c-rpx: RPX board Motorola 8xx I2C device (uses i2c-algo-8xx) (NOT BUILT BY DEFAULT) -i2c-velleman: Velleman K9000 parallel port adapter (uses i2c-algo-bit) +i2c-velleman: Velleman K8000 parallel port adapter (uses i2c-algo-bit) diff -ruN linux-2.4.24-pre2/drivers/i2c/Config.in linux-2.4.24-pre2-k5/drivers/i2c/Config.in --- linux-2.4.24-pre2/drivers/i2c/Config.in Tue Dec 23 22:19:41 2003 +++ linux-2.4.24-pre2-k5/drivers/i2c/Config.in Wed Dec 24 22:25:47 2003 @@ -12,7 +12,7 @@ if [ "$CONFIG_I2C_ALGOBIT" != "n" ]; then dep_tristate ' Philips style parallel port adapter' CONFIG_I2C_PHILIPSPAR $CONFIG_I2C_ALGOBIT $CONFIG_PARPORT dep_tristate ' ELV adapter' CONFIG_I2C_ELV $CONFIG_I2C_ALGOBIT - dep_tristate ' Velleman K9000 adapter' CONFIG_I2C_VELLEMAN $CONFIG_I2C_ALGOBIT + dep_tristate ' Velleman K8000 adapter' CONFIG_I2C_VELLEMAN $CONFIG_I2C_ALGOBIT dep_tristate ' NatSemi SCx200 I2C using GPIO pins' CONFIG_SCx200_I2C $CONFIG_SCx200 $CONFIG_I2C_ALGOBIT if [ "$CONFIG_SCx200_I2C" != "n" ]; then int ' GPIO pin used for SCL' CONFIG_SCx200_I2C_SCL 12 diff -ruN linux-2.4.24-pre2/drivers/i2c/i2c-velleman.c linux-2.4.24-pre2-k5/drivers/i2c/i2c-velleman.c --- linux-2.4.24-pre2/drivers/i2c/i2c-velleman.c Mon Dec 22 21:50:10 2003 +++ linux-2.4.24-pre2-k5/drivers/i2c/i2c-velleman.c Wed Dec 24 22:25:24 2003 @@ -1,5 +1,5 @@ /* ------------------------------------------------------------------------- */ -/* i2c-velleman.c i2c-hw access for Velleman K9000 adapters */ +/* i2c-velleman.c i2c-hw access for Velleman K8000 adapters */ /* ------------------------------------------------------------------------- */ /* Copyright (C) 1995-96, 2000 Simon G. Vogl -- Jean Delvare http://www.ensicaen.ismra.fr/~delvare/
