Hi Greg, The following patch fixes incorrect dependencies (as far as I can see) for the SCx200 modules. A similar patch (with even more fixes) is also needed for Linux 2.4, and will be part of my next wave to Marcelo. Note that I don't have the necessary hardware to actually test anything, but a quick look at the code doesn't leave much place for doubt IMHO. Comments welcome. --- linux-2.6.0/drivers/i2c/busses/Kconfig.orig 2003-12-18 03:59:28.000000000 +0100 +++ linux-2.6.0/drivers/i2c/busses/Kconfig 2003-12-24 11:55:17.000000000 +0100 @@ -201,7 +201,7 @@ config SCx200_I2C tristate "NatSemi SCx200 I2C using GPIO pins" - depends on SCx200 && I2C_ALGOBIT + depends on SCx200_GPIO && I2C_ALGOBIT help Enable the use of two GPIO pins of a SCx200 processor as an I2C bus. @@ -228,7 +228,7 @@ config SCx200_ACB tristate "NatSemi SCx200 ACCESS.bus" - depends on I2C_ALGOBIT!=n && I2C + depends on I2C help Enable the use of the ACCESS.bus controllers of a SCx200 processor. -- Jean Delvare http://www.ensicaen.ismra.fr/~delvare/
