> as99127f-i2c-1-2d > Adapter: SMBus nForce2 adapter at 5500 > Algorithm: Unavailable from sysfs > VCore 1: +1.70 V (min = +1.49 V, max = +1.81 V) > VCore 2: +1.70 V (min = +1.49 V, max = +1.81 V) > +3.3V: +3.39 V (min = +2.98 V, max = +3.63 V) > +5V: +4.95 V (min = +4.52 V, max = +5.48 V) > +12V: +11.55 V (min = +10.82 V, max = +13.13 V) > -12V: -12.14 V (min = -0.00 V, max = -0.00 V) > -5V: -4.60 V (min = -0.00 V, max = -0.00 V) > fan1: 4927 RPM (min = 3000 RPM, div = 2) ALARM > fan2: 0 RPM (min = 3000 RPM, div = 2) ALARM > fan3: 0 RPM (min = 3000 RPM, div = 2) ALARM > M/B Temp: +39?C (high = +127?C, hyst = +60?C) > CPU Temp: +28.0?C (high = +120?C, hyst = +100?C) > temp3: +255.4?C (high = +100?C, hyst = +100?C) > vid: +1.650 V > alarms: > beep_enable: > Sound alarm enabled > > M/B and CPU temp are swapped. CPU is 39 and MB 28 I doubt it. It would be physically difficult to do this, unless the monitoring chip is hardly tied to the CPU. This was never seen. temp1 (here displayed as "M/B Temp") is the monitoring chipset internal temperature. 39 degrees is exactly what I have for a similar chip here. CPU Temp (temp2) is probably wrong. Take a look at the configuration file, there are three different formulae for temp2. Maybe you're using one that doesn't work for your motherboard. Try the other two. -- Jean Delvare http://www.ensicaen.ismra.fr/~delvare/
