don't know where the w83627hf module is but that's what you need. It's in our package. Find it and get it loaded. i2c-i801 is working fine. Don't load lm75 or smbus-arp. Brian Foddy wrote: > > I'm trying to use lm_sensors to monitor a new > machine using the Asus PC-DL motherboard, > (3Ghz Xeon, Canterwood chip set). Using Mandrake > 9.2 with the standard 2.8.0 included, sensors-detect > > Probing for PCI bus adapters... > Use driver `i2c-i801' for device 00:1f.3: Intel 82801EB ICH5 > Probe succesfully concluded. > > We will now try to load each adapter module in turn. > Load `i2c-i801' (say NO if built into your kernel)? (YES/no): > Module loaded succesfully. > > After sensors-detect it finds: > #----cut here---- > # I2C module options > alias char-major-89 i2c-dev > #----cut here---- > > To load everything that is needed, add this to some /etc/rc* file: > > #----cut here---- > # I2C adapter drivers > modprobe i2c-i801 > modprobe i2c-isa > # I2C chip drivers > modprobe lm75 > modprobe eeprom > modprobe smbus-arp > modprobe w83627hf > # sleep 2 # optional > /usr/local/bin/sensors -s # recommended > #----cut here---- > > 2 modules can't be loaded (I can't find them anywhere) > modprobe: Can't locate module smbus-arp > modprobe: Can't locate module w83627hf > > And afterwards, the sensors command only outputs: > sensors > lm75-i2c-0-48 > Adapter: SMBus I801 adapter at 0500 > Algorithm: Non-I2C SMBus adapter > temp: +253.0?C (limit = +120.0?C, hysteresis = +100.0?C) > > lm75-i2c-0-49 > Adapter: SMBus I801 adapter at 0500 > Algorithm: Non-I2C SMBus adapter > temp: +253.0?C (limit = +120.0?C, hysteresis = +100.0?C) > > eeprom-i2c-0-50 > Adapter: SMBus I801 adapter at 0500 > Algorithm: Non-I2C SMBus adapter > Memory type: DDR SDRAM DIMM SPD > Memory size (MB): 512 > > eeprom-i2c-0-52 > Adapter: SMBus I801 adapter at 0500 > Algorithm: Non-I2C SMBus adapter > Memory type: DDR SDRAM DIMM SPD > Memory size (MB): 512 > > No cpu temps, fan speeds, voltages, etc. > I see from your web site the 82801EB has a > first release of 2.8.0. > Questions: > 1. Should this board work? > 2. Are the 2 failed modules the problem/significant? > 3. If I upgrade to 2.8.1 would that help? > > Also of note, I use many of the bttv / btaudio / ivtv > modules on this machine, and want to be sure upgrading > I2C wouldn't break any of these modules (or at least > I want to know what I'm getting in to). > > Hope you can help... I'd like to see these temps. > Brian
