Hi, I've found out how to use lm_sensors (2.8.0) to obtain all information from the motherboard. There is a starting point from Tyan for 2.7.0 but it needs a little tweaking for 2.8.0 or you won't get the fan rates. This is how I did it: - install the sensors.conf file from the tyan web site - also follow the instructions there to add modules etc. - now edit the relevant options line in the modules.conf and remove anything from "force_w83627hf" to the end of the line. This causes the w83627hf not being detected using the amd smd bus, which is good because it doesn't work ;-) - now add modules to the init script / config file so you have this list: i2c-amd756, i2c-isa, w83781d, w83627hf (eeprom) Now it should work. I saw there is a support request ticket regarding this.
