Hi, I have 2.6.0test10 running with /sys mounted My motherboard is an Asus A7n8x-8 rev2 (nforce2 chipset) When I run sensors I get: eeprom-i2c-0-51 Adapter: SMBus nForce2 adapter at 5000 Algorithm: Unavailable from sysfs ERROR: data 1 as99127f-i2c-1-2d Adapter: SMBus nForce2 adapter at 5500 Algorithm: Unavailable from sysfs VCore 1: +1.71 V (min = +1.49 V, max = +1.81 V) VCore 2: +1.71 V (min = +1.49 V, max = +1.81 V) +3.3V: +3.41 V (min = +2.98 V, max = +3.63 V) +5V: +4.95 V (min = +4.52 V, max = +5.48 V) +12V: +11.61 V (min = +10.82 V, max = +13.13 V) -12V: -12.14 V (min = -0.00 V, max = -0.00 V) -5V: -4.60 V (min = -0.00 V, max = -0.00 V) fan1: 4411 RPM (min = 3000 RPM, div = 2) fan2: 0 RPM (min = 3000 RPM, div = 2) fan3: 0 RPM (min = 3000 RPM, div = 2) M/B Temp: +4?C (high = +13?C, hyst = +6?C) CPU Temp: +3.3?C (high = +12?C, hyst = +10?C) temp3: +25.5?C (high = +12?C, hyst = +10?C) vid: +1.650 V alarms: beep_enable: Sound alarm enabled The values are incorrect, CPU temp can't be 3.3?C (I don't usually havemy computer in a fridge). The correct value would be between 40? and 50?for the CPU and 20? and 30? for the M/B Both the bios and the asus utility on Windows show the correct values Regards, Roberto Sebastiano ------------------------------------------------------------- Servizio Webmail di Multiplayer.it http://www.multiplayer.it