I've recompiled the lm-sensors and reinstaled it, after i did rmmod eeprom and then modprobe eeprom, but I made a slight change in my hardware, i've changed the DDR place, it was at the green bank, and I've put it now in the purple bank (the closest to the processor), my error changed to: root at athlon:/home/fernando# sensors eeprom-i2c-0-51 Adapter: SMBus nForce2 adapter at 5000 Algorithm: Non-I2C SMBus adapter Unknown EEPROM type (65) so, i did cat /proc/sys/dev/sensors/eeprom-i2c-0-51/* and it returned: root at athlon:/home/fernando# cat /proc/sys/dev/sensors/eeprom-i2c-0-51/* 67 67 65 84 51 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2 0 0 34 0 67 67 65 84 51 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2 0 0 34 0 67 67 65 84 51 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2 0 0 34 0 67 67 65 84 51 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2 0 0 34 0 67 67 65 84 51 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2 0 0 34 0 67 67 65 84 51 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2 0 0 34 0 67 67 65 84 51 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2 0 0 34 0 67 67 65 84 51 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2 0 0 34 0 my dmesg Starting eeprom update, slice 0 eeprom.o: 0x51 EEPROM contents (row 1): 0x43 0x43 0x41 0x54 0x33 0x00 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 eeprom.o: 0x51 EEPROM contents (row 2): 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x02 0x00 0x00 0x22 0x00 Starting eeprom update, slice 1 eeprom.o: 0x51 EEPROM contents (row 3): 0x43 0x43 0x41 0x54 0x33 0x00 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 eeprom.o: 0x51 EEPROM contents (row 4): 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x02 0x00 0x00 0x22 0x00 Starting eeprom update, slice 2 eeprom.o: 0x51 EEPROM contents (row 5): 0x43 0x43 0x41 0x54 0x33 0x00 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 eeprom.o: 0x51 EEPROM contents (row 6): 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x02 0x00 0x00 0x22 0x00 Starting eeprom update, slice 3 eeprom.o: 0x51 EEPROM contents (row 7): 0x43 0x43 0x41 0x54 0x33 0x00 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 eeprom.o: 0x51 EEPROM contents (row 8): 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x02 0x00 0x00 0x22 0x00 Starting eeprom update, slice 4 eeprom.o: 0x51 EEPROM contents (row 9): 0x43 0x43 0x41 0x54 0x33 0x00 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 eeprom.o: 0x51 EEPROM contents (row 10): 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x02 0x00 0x00 0x22 0x00 Starting eeprom update, slice 5 eeprom.o: 0x51 EEPROM contents (row 11): 0x43 0x43 0x41 0x54 0x33 0x00 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 eeprom.o: 0x51 EEPROM contents (row 12): 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x02 0x00 0x00 0x22 0x00 Starting eeprom update, slice 6 eeprom.o: 0x51 EEPROM contents (row 13): 0x43 0x43 0x41 0x54 0x33 0x00 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 eeprom.o: 0x51 EEPROM contents (row 14): 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x02 0x00 0x00 0x22 0x00 Starting eeprom update, slice 7 eeprom.o: 0x51 EEPROM contents (row 15): 0x43 0x43 0x41 0x54 0x33 0x00 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 eeprom.o: 0x51 EEPROM contents (row 16): 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x02 0x00 0x00 0x22 0x00 eeprom.o: 0x51 EEPROM contents (row 1): 0x43 0x43 0x41 0x54 0x33 0x00 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 eeprom.o: 0x51 EEPROM contents (row 2): 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x02 0x00 0x00 0x22 0x00 eeprom.o: 0x51 EEPROM contents (row 3): 0x43 0x43 0x41 0x54 0x33 0x00 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 eeprom.o: 0x51 EEPROM contents (row 4): 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x02 0x00 0x00 0x22 0x00 eeprom.o: 0x51 EEPROM contents (row 5): 0x43 0x43 0x41 0x54 0x33 0x00 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 eeprom.o: 0x51 EEPROM contents (row 6): 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x02 0x00 0x00 0x22 0x00 eeprom.o: 0x51 EEPROM contents (row 7): 0x43 0x43 0x41 0x54 0x33 0x00 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 eeprom.o: 0x51 EEPROM contents (row 8): 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x02 0x00 0x00 0x22 0x00 eeprom.o: 0x51 EEPROM contents (row 9): 0x43 0x43 0x41 0x54 0x33 0x00 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 eeprom.o: 0x51 EEPROM contents (row 10): 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x02 0x00 0x00 0x22 0x00 eeprom.o: 0x51 EEPROM contents (row 11): 0x43 0x43 0x41 0x54 0x33 0x00 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 eeprom.o: 0x51 EEPROM contents (row 12): 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x02 0x00 0x00 0x22 0x00 eeprom.o: 0x51 EEPROM contents (row 13): 0x43 0x43 0x41 0x54 0x33 0x00 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 eeprom.o: 0x51 EEPROM contents (row 14): 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x02 0x00 0x00 0x22 0x00 eeprom.o: 0x51 EEPROM contents (row 15): 0x43 0x43 0x41 0x54 0x33 0x00 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 eeprom.o: 0x51 EEPROM contents (row 16): 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x02 0x00 0x00 0x22 0x00 eeprom.o: 0x51 EEPROM contents (row 1): 0x43 0x43 0x41 0x54 0x33 0x00 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 if it is a problem i can reopen my case and turn the DDR back to the green bank... bye the way, in using Slackware 9.1 thanks. Em Ter, 2003-11-25 ?s 21:12, Jean Delvare escreveu: > > > Please provide the output of "ls -l > > > /proc/sys/dev/sensors/eeprom-i2c-0-50". > > > > [root at workstation1 root]# ls -l /proc/sys/dev/sensors/eeprom-i2c-0-50 > > total 0 > > -r--r--r-- 1 root root 0 Nov 25 14:36 00 > > -r--r--r-- 1 root root 0 Nov 25 14:36 10 > > -r--r--r-- 1 root root 0 Nov 25 14:36 20 > > -r--r--r-- 1 root root 0 Nov 25 14:36 30 > > -r--r--r-- 1 root root 0 Nov 25 14:36 40 > > -r--r--r-- 1 root root 0 Nov 25 14:36 50 > > -r--r--r-- 1 root root 0 Nov 25 14:36 60 > > -r--r--r-- 1 root root 0 Nov 25 14:36 70 > > -r--r--r-- 1 root root 0 Nov 25 14:36 80 > > -r--r--r-- 1 root root 0 Nov 25 14:36 90 > > -r--r--r-- 1 root root 0 Nov 25 14:36 a0 > > -r--r--r-- 1 root root 0 Nov 25 14:36 b0 > > -r--r--r-- 1 root root 0 Nov 25 14:36 c0 > > -r--r--r-- 1 root root 0 Nov 25 14:36 d0 > > -r--r--r-- 1 root root 0 Nov 25 14:36 e0 > > -r--r--r-- 1 root root 0 Nov 25 14:36 f0 > > This is correct, so I would say the procfs interface is working OK. So > this is the driver been broken. > > Fernando, your problem is exactly the same, as you'll have noticed. > > Could you please enable DEBUG in lm_sensors2, recompile and reinstall > it? (All I really want is DEBUG enabled on the eeprom module.) You just > have to edit the Makefile file and uncomment the right line. > > Then, unload the old eeprom module, load the new one, and do "cat > /proc/sys/dev/sensors/eeprom-i2c-0-50/*" again. Then take a look at > dmesg (or whichever log the debug stuff will have gone into), and tell > me what you see there, from the moment the module was loaded. Hopefully, > this will help me locate where the bug could hide. > > Thanks a lot.
