libsensors completed for 2.6

[mds at paradyne.com (Mark Studebaker)]

"Mark M. Hoffman" wrote:
> 
>
> Again, just a quick smoke test... more to come later.  ASB100 (w83781d)
> works mostly, with this output:
> 
> as99127f-i2c-0-2d
> Adapter: SiS96x SMBus adapter at 0xe600
> Algorithm: Unavailable from sysfs
> VCore 1:   +1.52 V  (min =  +1.42 V, max =  +1.57 V)
> VCore 2:   +1.52 V  (min =  +1.42 V, max =  +1.57 V)
> +3.3V:     +3.33 V  (min =  +3.14 V, max =  +3.46 V)
> +5V:       +5.03 V  (min =  +4.73 V, max =  +5.24 V)
> +12V:     +11.13 V  (min = +10.82 V, max = +13.19 V)
> -12V:     -11.63 V  (min =  -0.00 V, max =  -0.00 V)
> -5V:       -4.41 V  (min =  -0.00 V, max =  -0.00 V)
> fan1:     2689 RPM  (min = 3000 RPM, div = 2)
> fan2:     4655 RPM  (min = 3000 RPM, div = 2)
> fan3:     4560 RPM  (min = 3000 RPM, div = 2)
> ERROR: Can't get TEMP1 data!
> ERROR: Can't get TEMP2 data!
> ERROR: Can't get TEMP3 data!
> vid:      +1.500 V
> alarms:
> beep_enable:
>           Sound alarm enabled
> 
> I tested against 2.6.0-test9 with Khali's recent patch applied - I assume
> for now that this is the cause of the temp errors (looking for min instead
> of hyst).
> 


correct.
thanks for testing.
I just checked in some more fixes but I left the hyst->min mapping for
now
so others can test. 

Maybe I'll switch it after test10 comes out...