Hi,
On my Abit IC7-G there is a ICH5 chipset. Once sensors-detect has been
updated with the 24d3 device id it generates a nice lm-sensors
configuration. Unfortunately there are no real temperature readings
(there should be quite a few according to BIOS) or any fan-speeds (2 to
4 should be right). I also wonder about the corectness of the voltage
readings. In the BIOS display they are all 10% or less off nominal.
Is there anything I can test to see if I get more or more correct readings?
# lspci -n -v -s 00:1f.3
00:1f.3 Class 0c05: 8086:24d3 (rev 02)
Subsystem: 147b:1014
Flags: medium devsel, IRQ 17
I/O ports at 0500 [size=32]
# lspci -v -s 00:1f.3
00:1f.3 SMBus: Intel Corp. 82801EB SMBus (rev 02)
Subsystem: ABIT Computer Corp.: Unknown device 1014
Flags: medium devsel, IRQ 17
I/O ports at 0500 [size=32]
# cat /etc/sysconfig/lm_sensors
..
# Generated by sensors-detect on Mon Nov 17 20:01:45 2003
MODULE_0=i2c-i801
MODULE_1=lm80
MODULE_2=eeprom
# sensors
lm80-i2c-0-2e
Adapter: SMBus I801 adapter at 0500
Algorithm: Non-I2C SMBus adapter
+5V: +6.71 V (min = +6.71 V, max = +6.71 V)
VTT: +2.55 V (min = +2.55 V, max = +2.55 V)
+3.3V: +4.43 V (min = +4.43 V, max = +4.43 V)
+Vcore: +3.76 V (min = +3.76 V, max = +3.76 V) ALARM
+12V: +16.10 V (min = +16.10 V, max = +16.10 V)
-12V: -16.11 V (min = -16.11 V, max = -16.11 V)
-5V: -6.70 V (min = -6.70 V, max = -6.70 V)
fan1: 0 RPM (min = 0 RPM, div = 1)
fan2: 0 RPM (min = 0 RPM, div = 1)
temp: -1.00 ?C (hot:limit = -1?C, hysteresis = -1?C)
(os: limit = -1?C, hysteresis = -1?C)
alarms: Board temperature input (LM75) ALARM
eeprom-i2c-0-50
Adapter: SMBus I801 adapter at 0500
Algorithm: Non-I2C SMBus adapter
Memory type: DDR SDRAM DIMM SPD
SDRAM Size (MB): 512
eeprom-i2c-0-52
Adapter: SMBus I801 adapter at 0500
Algorithm: Non-I2C SMBus adapter
Memory type: DDR SDRAM DIMM SPD
SDRAM Size (MB): 512
Thanks and regards,
Nicolai
