> I have just installed i2c and lm_sensors from CVS because I thought > that it might solve thr fan2 problem. I get only fan1 readout and not > fan2, fan2 is 0 and should be around 2300. BIOS shows fan1 and fan2 > reading. > > Fan2 readout is trough: > it87-isa-0290 > Adapter: ISA adapter > > Motherboard is: > CHAINTECH 7VJL Apogee DeLuxe > Chipset: VIA KT400 > > Would you be so kind and check it out if it might be a bug or maybe it > is a mobo issue. It's a FAQ. You need to increase fan2_div (typically from 2 to 4) in /etc/sensors.conf (it87-* section) and run "sensors -s" again, possibly twice. Then "sensors" should report the correct reading. If not, try increasing even more (8...). > P.S. lm90 sensor is working great, readings are accurate:-) Aha, you're using my driver. Great :) I had no feedback for it yet. Could you please provide a sample sensors output, so that I can see how it does look? Also, I'd be great if you could verify that limit checkings are OK (simply set the limits in a way you know the readings will be outside of them, and see is sensors reports alarms correctly.) Thanks! If you find anything that would need fixing/tweaking in my driver, please let me know and I'll take a look. -- Jean Delvare http://www.ensicaen.ismra.fr/~delvare/
